Da-Lite 39021 Video Projector Interface Instructions
- June 3, 2024
- Da-Lite
Table of Contents
Video Projector Interface
39021 Video Projector Interface
CAUTION: The projector must be turned off before connecting the trigger
wires to the projector. Failure to do so may damage the controller.
Use 2-conductor 18–24 gauge wire to extend the low voltage
connection from the projector’s 5 or 12-volt screen trigger output to the
length required to reach the VPI.
NOTE: When extending the low voltage connection from the projector’s
screen trigger output polarity does not matter. The red and black wires from
the VPI are interchangeable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>