STARMAX WM-WSPHRT-NGRN Bluetooth Speaker Instruction Manual

September 24, 2024
Starmax

WM-WSPHRT-NGRN Bluetooth Speaker

“`html

Specifications:

  • Model: WM-WSPHRT-NGRN
  • Specification: Bluetooth 5.3
  • Charging time: 150 min
  • Music playing time: 60-90 min
  • Material: ABS

Product Description:

  1. On/off Switch
  2. LED indicators
  3. Charging port

Product Usage Instructions:

Charging:

1. Before first use, fully charge the device for 3-4 hours.

2. Connect the cable to a computer’s USB port, use an AC adapter
(not included), or other DC power supply not exceeding 5V,
0.3A.

3. The LED indicator will light up during charging and turn off
when the speaker is fully charged.

Cleaning and Storage:

1. Turn off the device before cleaning.

2. Use a soft damp cloth for cleaning.

3. Avoid using corrosive cleaners or abrasives (such as steel
wool or brushes).

Disposal of Batteries:

– Never dispose of batteries in fire, near excessive heat, or
direct sunlight as they can rupture or explode.

– Refer to local ordinances for proper battery disposal
methods.

FCC Compliance Information:

This device complies with Part 15 of the FCC Rules and must not
cause harmful interference. It has been tested to provide
reasonable protection against harmful interference.

FAQ:

Q: How long should I charge the device before first use?

A: Fully charge the device for 3-4 hours before the first
use.

Q: How should I clean the device?

A: Turn off the device before cleaning and use a soft damp
cloth. Avoid corrosive cleaners or abrasives.

“`

Instruction Manual
Model: WM-WSPHRT-NGRN
Specification: Bluetooth 5.3 Charging time: 150 min Music playing time: 60-90 min Material: ABS
Device description 1. On/off Switch 2. LED indicators 3. Charging port
Power on and connect Switch the on/off button on the device to turn the speaker on or off. Enable Bluetooth® function on mobile device, and search for Bluetooth® devices. The device name is “WM-WSPHRT”. When the pairing is successful, a beep will sound. If you want to switch pairing to other mobile devices, then you need to cut off the connection of existing equipment and repeat the steps with the new device.

WARNING: You must select a qualified charger from a reliable
source. You must charge the Bluetooth® speaker if it has not
been used for more than 12 months.
Please fully charge the device for 3-4 hours before first use. Connect the cable to the computer’s USB port, use an AC adapter (not included) or other DC power supply not exceeding 5V, 0.3A. The LED indicator will light up and the LED indicator will turn off when the speaker is fully charged.
Cleaning and storage 1. Turn off the device before cleaning. 2. Use a soft damp cloth for cleaning. 3. Do not use corrosive cleaners or abrasives (such as steel wool or brushes) for cleaning.
Disposal of Batteries (if applicable): Never dispose of any types of batteries in fire or near
excessive heat or direct sunlight. Overheated batteries can rupture or explode.
lf you are unsure of how or where to dispose of a battery, refer to your local ordinances for the proper location, method, etc.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the device and receiver. –Connect the device into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals