baby brezza BRZ00139A Milk Bottle Warmer Instructions

: June 6, 2024
: baby brezza

Table of Contents

Setting Guide
IMPORTANT SAFEGUARDS
SAFE+SMART BOTTLE WARMER° PARTS
APP INTERFACE
FEATURES
STEADY WARM
QUICK WARM
DEFROSTING FROZEN MILK POUCHES
DE-SCALING THE BOTTLE WARMER
TROUBLESHOOTING
CUSTOMER SERVICE
LIMITED 1-YEAR WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

save + smart
bottle warmer
(Milk bottle Warmer)

baby brezza BRZ00139A Milk Bottle Warmer

Instructions
for set – up, usa and cleaning

Setting Guide

This should only be used as a general reference. Setting Guide After some uses, you will learn what settings will work best for your bottles. Always test bottle temperature before feeding baby.

Qick Warm
Room temperature70°F / 21°C

PLASTIC Bottle	Glass Bottle

Steady Warm
Cold temperature REFRIGERATED 39°F / 4°C

PLASTIC Bottle	Glass Bottle

Qick Warm
Room temperature70°F / 21°C

PLASTIC Bottle	Glass Bottle

Steady Warm
Cold temperature REFRIGERATED 39°F / 4°C

PLASTIC Bottle	Glass Bottle

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should be followed, including the following:

Read all instructions before using.
Do not touch hot surfaces. Use handles.
To protect against electric shock and injury to persons do not immerse cord, plug, water tank or appliance in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning. Allow cooling before inserting or removing parts, and before cleaning the appliance.
Do not operate this appliance with a damaged cord or plug. If the appliance malfunctions or has been damaged in any manner, contact Elfe Juvenile Products at 1-800-667-8184 or by email at: service@elfe.ca.
The use of accessory attachments not recommended by the appliance manufacturer may cause fire, electric shock or injury.
Use on a level surface and be sure there is no debris under the unit and the rubber pads are touching the surface.
Household use only. Do not use outdoors.
Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
Extreme caution must be used when moving an appliance containing hot liquids.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Do not use appliances other than intended use.
This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plugin anyway.
To disconnect, turn the appliance off, then remove the plug from the wall outlet.
Make sure the machine is turned off before unplugging.
A short power-supply cord is provided to reduce the risks of becoming entangled in or tripping over a longer cord. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. If using the machine with an extension cord, make sure the cord is the proper electrical rating for the machine.
The extension cord should be arranged so that it does not drape over a countertop or tabletop, where it can be pulled on by children or tripped over unintentionally.
Before serving make sure food is at a safe temperature for the baby.
Unplug the cord from the wall outlet before serving milk or food warmed in the appliance.
Do not leave the cord within the child’s reach.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.

SAFE+SMART BOTTLE WARMER° PARTS

CAUTION: To maintain compliance with the RF exposure guideline, place the unit at least 8in/20cm from nearby persons.
CAUTION: If El, EZ E3, or E4 error messages appear on the bottle warmer screen, please contact customer service before any continued use of the bottle warmer.
Save these instructions baby brezza BRZ00139A Milk Bottle
Warmer - fig 1

APP INTERFACE

Once connected the setup screen will display on your mobile device.

baby brezza BRZ00139A Milk Bottle Warmer - fig 9

FEATURES

Features 2 Warming Modes: Steady Warm Mode: A warm water bath gently heat milk to body temperature, preserving essential nutrients found in breast milk, which can break down at high temperatures. Quick Warm Mode: Steam is used to safely & efficiently heat formula or milk fast.
Simple Defrost: Safely defrost frozen breast milk pouches.
The easy-to-use control panel allows you to set up your warmer whether starting with cold or room temperature milk.
The Baby Brezza App lets you control the warmer from your smartphone and alerts you when your bottle is ready.
Works with all bottle types. Remember, bottles are made of different materials and construction heat at different rates. Try a higher or lower setting if your bottle is too cold or too warm. Always remove venting systems when warming. Bottles with bottom venting systems may leak when heating.

USING THE SAFE+SMART BOTTLE WARMER” MOBILE APP
The bottle warmer can be set up straight from your smartphone or tablet. Download and install the Baby Brezza Bottle Warmer App available on the app store & Google play. Bluetooth * is required on your mobile device to connect to the Safe+Smart Bottle Warmer.

baby brezza BRZ00139A Milk Bottle Warmer - fig 3

STEADY WARM

Fill the bottle warmer with water until it matches the level of the milk inside the bottle. Always use room temperature water for best heating results. Using warm, hot, or cold water will result in inaccurate or dangerous bottle temperatures.
Close the bottle warmer cover.
Press to turn on the machine.
Use the setting guide on the back of this manual to determine the setting for your bottle. Make sure to select the correct bottle size and material.
Identify the starting temperature of your bottle.
• If your bottle is room temperature (approximately 70F/21C) press 0 repeatedly to select your setting.
• If your bottle is cold (refrigerated 39°F / 4°C) press repeatedly to select your setting.
Press to begin heating.
Warmer will beep when the bottle is ready. Remove bottle immediately after warming is complete, swirl bottle gently and check the temperature before feeding baby.

QUICK WARM

All the measuring cups (included on the back of the warmer) with room temperature water. Do not use warm, hot or cold water, which will result in inaccurate or dangerous bottle temperatures. Empty the measuring cup into the warmer as shown. Water level will be at the ‘QuickWarmsfill line- see arrow below.
Close the bottle warmer cover.
Press to turn on the machine.
Use the setting guide on the back of this manual to determine the setting for your bottle. Make sure to select the correct bottle size and material.
Identify the staffing temperature of your bottle.
• If your bottle is room temperature (approximately 70F/21C) press repeatedly to select your setting.
• If your bottle Is cold (refrigerated 391 / 4°C) press repeatedly to select your setting.
Press to begins heating.
Warmer will beep when the bottle is ready. Remove bottle immediately after warming Is complete, swirl bottle gently and check the temperature before feeding baby. Please note: the quick warm mode uses steam to warm bottles. Please use caution when opening the lid after the warming cycle is complete. Always use the orange bottle tray to remove the bottle from the warmer and avoid touching any hot areas of the bottle warmer. Outside of warmed bottle may be hot immediately after warming.

DEFROSTING FROZEN MILK POUCHES

To use the defrost setting, place a frozen milk pouch into the warmer and fill water to the line of the milk In the pouch. Press the temperature setting until thel” icon is displayed on the LCD screen, Then press to begin heating.

baby brezza BRZ00139A Milk Bottle Warmer - fig 6

DE-SCALING THE BOTTLE WARMER

It is very important to de-scale this appliance every 4 weeks to ensure that it continues to work properly. Pour all remaining water out of the water chamber. To de-scale, mix 2oz (60m1) of white vinegar with 4oz (120m1) of cold water into the water chamber, and then run one heating cycle on setting 5 until any scaling has been removed. Please ensure proper ventilation when descaling with vinegar.

TROUBLESHOOTING

Condition	Possible Cause	Possible Remedy
The unit will not power on.	The unit is unplugged.	Ensure that plug is

securely inserted into the power outlet.
is held for too long.| Press to turn on the unit. Do not hold down the button.
The lid will not close.| Bottle Tray is misaligned inside bottle warmer.| Ensure that the bottle tray is lined up with bottle tray slots in the bottle warmer.
The machine will not sync to a mobile device or is disconnected.| Bluetooth connectivity in mobile devices is not turned on.| Turn on the Bluetooth connectivity in your mobile device before syncing to the unit.
The mobile device is out of range.| The mobile device needs to be within 20ft of the bottle warmer.
The warmed bottle is too hot. (Quick warm setting)| Not enough water was added to the bottle warmer.| Add water to the marked Quick Warm fill line.
Setting time is the too long or incorrect setting chosen.| Try a lower setting according to your preference.
The warmed bottle is too hot. (Steady warm setting)| Not enough water was added to the bottle warmer.| Add water until it matches the height of the liquid in your bottle.
Setting time is the too long or incorrect setting chosen.| Try a lower setting according to your preference.
The warmed bottle is too cold. (Quick & Steady warm
settings)| Too much water added to bottle warmer.| Reduce water in a bottle warmer to the required height based on your setting. (Refer to page 5).
Setting time is too short or incorrect setting chosen.| Try a higher setting according to your preference.
“E5″ error displays on the machine or”Error” message displays on the app.| Little or no water has been added to the machine.| Add cold water to the machine and let it sit and cool for 5 min. Empty out cold water and restart the bottle warmer. Make sure to add the appropriate amount of water needed for warming.
El, E2, E3, or E4 error displays on the machine.| Internal malfunction in machine.| Please contact customer service before continuing to use your machine.

If you can not remedy problems with the machine by using the troubleshooting chart above, do not return your warmer to the store please contact Customer Service at: 1-R00-667-A184 or by email: servire@elfe.ca

CUSTOMER SERVICE

If you are experiencing problems with your Baby Brezza Safe + Smart Bottle Warmer, please call our Customer Service department at 1-800-667-8184 or by email at: service@elfe.ca before returning the product so that we can ogler you our best service customized to your particular situation.

LIMITED 1-YEAR WARRANTY

The limited warranty is valid only on products bought through authorized resellers and used in Canada. Buying through an unauthorized reseller or using this product outside of Canada automatically voids this warranty. This warranty is available to consumers only. You are a consumer if you own a Baby Brezza Bottle Warmer that was purchased at retail for personal, family, or household use. Except as otherwise required under applicable law, this warranty is not available to retailers or other commercial purchasers or owners. We warrant that your Baby Brezza Bottle Warmer will be free of defects in material or workmanship under normal home use for one year from the date of original purchase. Customers will be required to present original proof of purchase in order to obtain the warranty benefits. In the event that you do not have proof of purchase date, the purchase date for purposes of this warranty will be the date of manufacture. If your Baby Brezza Bottle Warmer should prove to be defective within the warranty period, we will repair it or, if we consider it necessary, replace it. To obtain warranty services, please call Customer Service at 1-800-667-8184 or by email at: service@elfe.ca.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

It’s about time
Try other great products to save up to 30 minutes a day. What will you do with the extra time? Learn more at elfe.com

baby brezza BRZ00139A Milk Bottle Warmer - fig 7