baby brezza BRZ0084 Bottle+Breastmilk Warmer Instructions

BRZ0084 Bottle+Breastmilk Warmer
Instruction manual

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should be followed, including the following:

1. Read all instructions before using.

2. Do not touch hot surfaces. Use handles.

3. To protect against electric shock and injury to persons do not immerse the cord, plug, water tank, or appliance in water or other liquid.

4. Close supervision is necessary when any appliance is used by or near children.

5. Unplug from the outlet when not in use and before cleaning.
   Allow cooling before inserting or removing parts, and before cleaning the appliance.

6. Do not operate this appliance with a damaged cord or plug.
   If the appliance malfunctions or has been damaged in any manner, contact Elfe Juvenile Products at 1-800-667-818 or by email at: service@elfe.ca.

7. The use of accessory attachments not recommended by the appliance manufacturer may cause fire, electric shock, or injury.

8. Use on a level surface and be sure there is no debris under the unit and the rubber pads are touching the surface.

9. Household use only. Do not use outdoors.

10. Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.

11. Extreme caution must be used when moving an appliance containing hot liquids.

12. Do not place on or near hot gas or electric burner, or in a heated oven.

13. Do not use appliances for other than intended use.

14. This appliance has a polarized plug (one blade wider than the other).
    To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

15. To disconnect, turn the appliance off, then remove the plug from the wall outlet.

16. Make sure the machine is turned off before unplugging.

17. A short power-supply cord is provided to reduce the risks of becoming entangled in or tripping over a longer cord. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. If using the machine with an extension cord, make sure the cord is the proper electrical rating for the machine.

18. The extension cord should be arranged so that it does not drape over a countertop or tabletop, where it can be pulled on by children or tripped over unintentionally.

19. Before serving make sure food is at a safe temperature for the baby.

20. Unplug the cord from the wall outlet before serving milk or food warmed in the appliance.

21. Do not leave the cord within the child’s reach.

CAUTION: If E1, E2, E3, or E4 error messages appear on the bottle warmer screen, please contact customer service before any continued use of the bottle warmer.

Bottle+Breastmilk Warmer Parts and Controls

Steady Warm (ideal for warming breastmilk)

1. Place the bottle in the bottle tray and all the bottles warmer with water until it matches the level of the milk inside the bottle. Always use room temperature water for best heating results.
   Using warm, hot, or cold water will result in inaccurate or dangerous bottle temperatures.

2. Close the bottle warmer cover.

3. Press to turn on the machine.

4. Use the setting guide on the back of this manual to determine the setting for your bottle. Make sure to select the correct bottle size and material.

5. Identify the starting temperature of your bottle.
   • If your bottle is room temperature (approximately 70°F / 21°C) press repeatedly to select your setting.
   • If your bottle is cold (refrigerated 39°F / 4°C) press repeatedly to select your setting.

6. Press to begin heating.

7. Warmer will beep when the bottle is ready. Remove the bottle immediately after warming is complete, swirl the bottle gently and check the temperature before feeding the baby.
   

****If you are warming multiple bottles, allow the bottle warmer to cool before warming the next bottle.

Quick Warm (ideal for warming formula or baby food)

Defrosting Frozen Milk Pouches

To use the defrost setting, place a frozen milk pouch into the warmer and will water to the line of the milk in the pouch.
Press the temperature setting until the “F” icon is displayed on the LCD screen,
Then press to begin heating.

Cleaning the Bottle Warmer

Always allow the warmer to cool before cleaning

| |
---|---|---
Unplug the bottle warmer and remove the bottle tray from the base.| Carefully pour out any remaining water inside the base.| Wipe all parts dry before the next use.
If necessary, wipe the base exterior with a damp cloth. Do not use scouring pads, abrasives, or solvents for cleaning.

Descaling the Bottle Warmer

It is very important to descale this appliance every 4 weeks to ensure that it continues to work properly. Pour all remaining water out of the water chamber. To descale, mix 2oz  (60ml) of white vinegar with 4oz (120ml) of cold water into the water chamber, and then run one heating cycle on setting 5 until any scaling has been removed. Please ensure proper ventilation when descaling with vinegar.

Troubleshooting

securely inserted into the power outlet.
is held for too long.| Press to turn on the unit. Do not hold down the button.
The lid will not close.| The bottle Tray is misaligned inside the bottle warmer.| Ensure that the bottle tray is lined up with bottle tray slots in the bottle warmer.
The warmed bottle is too hot. (Quick warm setting).| Not enough water was added to the bottle warmer.| Add water to the marked Quick Warm fill line.
The setting time is too long or an incorrect setting was chosen.| Try a lower setting according to your preference.
The warmed bottle is too hot. (Steady warm setting).| Not enough water was added to the bottle warmer.| Add water until it matches the height of the liquid in your bottle.
Setting time is the too long or incorrect setting chosen.| Try a lower setting according to your preference.
The warmed bottle is too cold. (Quick & Steady warm settings).| Too much water was added to the bottle warmer.| Reduce water in a bottle warmer to the required height based on your setting. (Refer to page 5).
Setting time is the too short or incorrect setting chosen.| Try a higher setting according to your preference.
“ES” error displays on the machine or”Error message displays on the app.| Little or no water has been added to the machine.| Add cold water to the machine and let it sit and cool for
5 min. Empty out cold water and restart the bottle warmer. Make sure to add the appropriate amount of water needed for warming.
El, E2, E3, or E4 errors are displays on the machine.| Internal malfunction in machine.| Please contact customer service before continuing to use your machine.

If you can not remedy problems with the machine by using the troubleshooting chart above, do not return your warmer to the store, please contact Customer Service at: 1-800- 667-8184 or by email: service@elfe.ca.

LIMITED 1-YEAR WARRANTY

The limited warranty is valid only on products bought through authorized resellers and used in Canada. Buying through an unauthorized reseller or using this product outside of Canada automatically voids this warranty. This warranty is available to consumers only. You are a consumer if you own a Baby Brezza Bottle + breastmilk warmer that was purchased at retail for personal, family, or household use. Except as otherwise required under applicable law, this warranty is not available to retailers or other commercial purchasers or owners.
We warrant that your Baby Brezza Bottle + breastmilk warmer will be free of defects in material or workmanship under normal home use for one year from the date of original purchase. The customer will be required to present original proof of purchase in order to obtain the warranty benefits. In the event that you do not have proof of purchase date,  the purchase date for purposes of this warranty will be the date of manufacture. If your Baby Brezza Bottle + breastmilk warmer should prove to be defective within the warranty period, we will replace it, if we consider it necessary. To obtain warranty services, please call Customer Service at 1-800-667-8184 or by email at: service@elfe.ca.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Settings Guide

This settings guide should only be used as a general reference.
After some uses, you will learn what settings will work best for your bottles. Always test bottle temperature before feeding baby.

Quick Warm
Room Temperature 70˚F / 21˚C

Cold Temperature REFRIGERATED 39˚F / 4˚C

Steady Warm
Room Temperature 70˚F / 21˚C

Cold Temperature REFRIGERATED 39˚F / 4˚C

© 2022 Baby Brezza Enterprises LLC

Documents / Resources

| baby brezza BRZ0084 Bottle+Breastmilk Warmer [pdf] Instructions
BRZ0084, Bottle Breastmilk Warmer, Breastmilk Warmer, Warmer, BRZ0084
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>