Baby Brezza ‎BRZ0098 one-step sterilizer dryer Instructions

: June 5, 2024
: baby brezza

Table of Contents

Baby Brezza ‎BRZ0098 one-step sterilizer dryer
IMPORTANT SAFEGUARDS
Sterilizer Dryer Components
Set-up and Use
Cleaning
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Baby Brezza ‎BRZ0098 one-step sterilizer dryer

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

Read all instructions carefully before using your
Ensure that the supply voltage marked on the appliance corresponds with your mains
If there is any visible damage to the appliance, the plug or to the supply cord, disconnect the appliance immediately and do not use
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly
Do not allow children to touch or use the The appliance becomes very hot and the steam can cause severe scalding.
Do not move the appliance when it is in use or contains hot
Do not touch the hot
Do not place the appliance on or near hot surfaces, in a heated oven or near a gas or electric
Unplug the appliance from the power supply before cleaning or
Do not immerse the supply cord, plug or base unit in water or any other
This appliance does not contain any user serviceable parts Do not dismantle.
This appliance is for indoor household use Do not use outdoors.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their
This appliance has a polarized plug (one blade wider than the other). To reduce risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the pug in any way.
a) Short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer
Extension cords are available and may be used if care is exercised in their
If an extension cord is used: The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance; The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be tripped over, snagged, or pulled on unintentionally (especially by children).
Children should be supervised to ensure that they do not play with the
Not for space heating
Always use on a level heat resistant
Always keep the electric sterilizer and its plug out of reach of small
To disconnect, turn any control “off”, then remove plug from wall
Ensure water has been added to the base unit before the sterilization cycle is switched
Always add 120ml of water before If you put too little or too much water into the sterilizer, the high sterilization effi ciency may not be reached.
Always unplug from the electric outlet when not in use. Allow to cool before putting on or taking off any
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
The use of accessory attachments is not recommended by the appliance manufacturer as this may cause
This sterilizer is intended to be used in household and similar application such as staff kitchen areas in shops, offi ces and other working environments. b. farm houses. c. by clients in hotels, motels and other residential type of environments. d. bed and breakfast.
Do not open while in use as this product contains boiling Beware of escaping steam from the vent holes in the lid.
Allow at least 30 minutes interval between two operations and make sure the unit has been cooled down before pressing the start button for sequential
Steam escaping from the unit can cause Always allow 5 minutes to cool down after the cycle finishes before lifting the lid.
KEEP CHILDREN AWAY from this sterilizer at all
To provide continued protection against risk of electric shock, connect to properly grounded outlets
CAUTION: Risk of electric shock, disconnect electric power before
Use only distilled water, bottled water or fresh running water to
Never use any

Sterilizer Dryer Components

Control Panel and LCD screen

TECHNICAL DATA

Supply voltage: 120V ~ 60Hz Power: 600W
Model: BRZ0098

Set-up and Use

Before placing items in the appliance for sterilization it is important that all bottles, nipples and accessories are empty and that they are CLEAN and FULLY RINSED in fresh water.

Place the appliance on a flat surface where it is out of reach of children and it will not be knocked or moved during
Remove the lid and accessory rack from the sterilizer
Pour distilled water on the stainless steel heater surface to MAX line (120ml). Never fill past MAX
Place the accessory rack on the
Place clean bottles with their opening facing downward on the lower posts of the accessory Place the bottle accessories (e.g. nipple, collar, cap, etc) on the upper posts of accessory rack.
Place the lid on top of sterilizer base. Please ensure that the lid fits securely on the base without any gaps where the lid and base
Plug the appliance into the power
Press the On/Off button once. The LCD will display “00:00” and the backlight will turn Choose your desired function following the instructions below. If there is no selection of function after pressing on/off button, the appliance will automatically switch off.

Sterilize and Auto-Dry Function:

Choose the drying time (after steam sterilization): Press the Sterilize/Dry button one time for 45 minute dry time, two times for 60 minute dry time, three times for 30 minute dry The sterilize/dry cycle will start 3 seconds after the last button is pressed
When the sterilization cycle starts, the LCD will count up second-by-second for the duration of the sterilization
When the sterilization cycle is complete, the appliance will beep, pause for 3 seconds and begin the drying cycle for the amount of time selected in step The timer on the LCD will count down second-by-second until it reaches 00:00.
When the drying cycle is completed, the appliance will beep 5 times and switch off automatically

Sterilization only function:

Press the Sterilize button one time, the LCD will display “00:00” and the steam icon. The sterilization cycle will start 3 seconds after pressing the sterilize button and the LCD will count up second-by-second for the duration of the sterilization
When the sterilization cycle is complete, the appliance will beep 5 times and switch off

Dryer only function:

Press the Dry button one time for 30 minute dry time, two times for 45 minute dry time, three times for 60 minute dry The drying cycle will start 3 seconds after the last button is pressed and the timer on the LCD will count down second-by second until it reaches 00:00.
When the drying cycle is completed, the appliance will beep 5 times and switch off

Caution: If it is necessary to remove water from the base, always POUR AWAY FROM FAN OPENING.

Note water pour direction icon on base, and pour in direction of arrow.

Cleaning

Always unplug your product before
Do not immerse the base, the supply cord or the plug in water or other
Do not clean base under water
Use a soft damp cloth to clean the base and control
Never use abrasive pads to clean the plastic parts of the
The lid, accessory rack can be cleaned in hot soapy
Mineral residue, particularly in hard water areas, may deposit on the stainless steel heating plate after a few sterilization cycles. To avoid scale build up, wipe the surfaces with a soft moist cloth after each
Deposits can be removed with proprietary scale removers or by leaving 30ml water and vinegar solution (1 part vinegar to 4 parts water) on the heating bowl for approximately 30 The bowl should then be wiped clean with a clean, dry cloth. Some discoloration spots may remain after cleaning with a vinegar solution, but these are harmless.
Do not use abrasives or solvents for cleaning; they may damage the appliance and the surface of the heating
Dismantle the filter box and clean the filter once a Make sure the filter is fully dried before placing back to the filter box.