GE Lighting 93100352 LED+ Speaker Light Bulb User Guide

: June 6, 2024
: GE Lighting

Table of Contents

**GRAPHICS APPROVAL
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

A SAVANT COMPANY

**GRAPHICS APPROVAL

**

Approvals designate all items on the checklist that have been reviewed & are correct in addition to other organizational responsibilities.

REVIEWED I SIGNATURE I PACKAGING GRAPHICS DATE

Proof Reading — Spelling
Website
Proof against TDS request
Graphics Printability

SKU LISTING INFO: 93129779 NPI LED+ BR30 Speaker DL 6413780 REVISION (DATE) PA: 3 (07-07-21) JCS BAR CODE SPEC: ❑ 100% No BWR ❑ 80% No BWR IMIN/A INSERT (IF SHARED): None SUPPLIER PROJECT: N/A PRINT METHOD: Offset/Litho ❑ Flexo (direct) GE DIE: NOT CONTROLLED PK (VERSION): PK-00106478-1

PC93129779 QSG
THIS ART IS SUPPLIED AT 100% SCALE DO NOT RESIZE, RESHAPE OR ALTER

Screw in the bulb
Turn on the bulb
Using your Bluetooth* compatible device, look for the bulb as a discoverable device “GE BR30 ROB Speaker Bulb”
Connect the bulb to play music, podcasts, and more
Use Bluetooth device or remote provided to control audio. Use remote to control music, change colors, change light mode, adjust brightness, assign audio channel, and turn the bulb on and off.

NOTE: To assign audio channel, point remote at target bulb and press [Left]/[Mono]/[Right] button. The bulb will flash once to acknowledge the new assignment. Mix Left and Right channels to create a stereo effect. NOTE: GE LED+ Speaker bulbs will sync automatically with other GE LED+ A21 or BR30 bulbs. Link this bulb with other bulbs to create a surround sound experience. Bulbs can be controlled individually by using the remote within close range of a specific bulb. Or, control all synced bulbs by using the remote within close range of the parent bulb
NOTE: While the BR30 speaker bulb is compatible with most dimmer switches, the volume output may be reduced if the dimmer is set below 20% dimming level. To link additional bulbs, turn on the added bulb and it will automatically sync with the parent bulb or the first bulb that was set up in the system. Subsequent bulbs should be within 25 ft of the parent bulb. Bulbs can be controlled individually by using the remote within close range of a specific bulb. Or, control all synced bulbs by using the remote within close range of the parent bulb.

FCC ID: PUU-LEDX1ODBR3OM
LED+10DBR30M/SWRGBSPK
LED+10DBR30M/DLRGBSPK
Visit gelighting.com/led-plus

front of card (accordion fold)

Visit gelighting.com/led-plus

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by GE Lighting is under license. Other trademarks and trade names are those of their respective owners.
GE is a trademark of General Electric Company. Used under trademark license.

PK-00106478-1
back of card

Documents / Resources

| GE Lighting 93100352 LED+ Speaker Light Bulb [pdf] User Guide
LEDX10DBR30M, PUU-LEDX10DBR30M, PUULEDX10DBR30M, 93100352, LED Speaker Light Bulb
---|---