sengled E21-N11 Smart LED Bulb User Manual

sengled E21-N11 Smart LED Bulb

Features

• Wireless control
• Dimmable via Sengled Home app
• Extra high light output
• Wide beam angle
• Supports Zigbee 3.0

Package Includes

• One Smart LED A19 bulb
• User manual and user guide

Product Specifications

• Power supply: 100V-130V, 60Hz
• Power consumption: 8.7W
• Operating temperature: -20℃~+40℃/-4°F~104°F
• Operating humidity: 0% ~ 95%
• Wireless Zigbee 2.4GHz (2405~2475MHz,IEEE 802.15.4)

Important Safety Information

Installation Instructions using a Sengled Hub

1. Download the Sengled Home App.

2. Register and sign-in to your Sengled account in the app.

3. Open the Sengled Home App, go to Devices and use “+” choose icon “a. Element bulbs” then scan QR code to add bulbs, or choose icon “b. scan QR code ” to add your bulb directly.
   If you don’t have a hub in your account, you should add a hub firstly. If you have other brand hub, you can refer to the item “Installation Instructions Using a Third-party hub”.

4. With power off, twist your Sengled Smart LED bulb into the socket. Then turn on power.

5. Follow in-app instructions to finish installation.

Congratulations on succesfully installing your smart bulbs.

Note:
Ensure your Seng led Home app can discover the bulb(s). If the app unsuccessfully discovers the bulb(s), please refer to the next section “Reset Instructions” for how to reset your bulb before attempting to add it back in.

Installation Instructions Using a Third-Party Hub

If you would like to set up your Smart LED bulb(s) with a third-party hub, such as SmartThings or Amazon Echo Plus, or find our latest list of supported third party hubs, please refer to support.sengled.com.

Reset Instructions

To reset your Smart LED bulb, ensure that the bulb is on and then quickly turn the bulb off and on >10 times (using a light switch or power bar works best). If the reset is successful, the bulb will flash five times . If it does not flash five times, you will have to try again. Once successfully reset, please try to pair it in your Sengled Home app again.

Frequently Asked Questions

1. Can bulbs be used in sockets with dimmers?
   No, bulbs are designed to be used in on/off sockets only.

2. Can this product be used outdoors?
   No, this bulb is designed for indoor use only.

3. Can different types of Sengled Smart LED bulbs be used simultaneously?
   Yes, a single Sengled Hub can support up to 64 devices from the Sengled Smart LED family.

CAUTION

• INDOOR USE ONLY
• DO NOT USE WITH DIMMERS
• NOT FOR USE IN TOTALLY ENCLOSED OR RECESSED LUMINAIRES

FCC ID: 2AGN8-E21N1X
IC: 20888-E21N1X

FCC

RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.

IC Radiation Exposure Statement for Canada
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent is otropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

User manuals for transmitters equipped with detachable antennas shall also contain the following notice in a conspicuous location:
This radio transmitter (identify the device by certification number. or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list. having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

IMPORTANT NOTE:

Radiation Exposure Statement:
This equipment complies with “Industry Canada RSS-1O2 for radiation exposure limits set forth for an uncontrolled environment”. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

© 2019 Sengled, Incorporated. All rights reserved. Sengled is a trademark of Sengled, Incorporated, registered in the United States and other countries. Specifications are subject to change without notice. Other trademarks and trade names are the property of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>