LORGAR LRG-CMT521 Gaming Microphone User Manual
- June 6, 2024
- LORGAR
Table of Contents
Dear customer!
Thank you for choosing our products.
www.lorgar.eu
FEATURES:
- Frequency Response: 50Hz—18kHz
- Sensitivity: -40dB±3dB
- S/N Ratio: 70dB (A-weighted)
- Recording format: 16bit
- Electrical Current : 75±5mA
- Nickel-plated diaphragm
- Plug and Play system
- Cardioid polar pattern
- Volume knob
- Mute button with LED indicator
- 360° Rotatio n & 180° Tilt
- 3,5 mm headphone jack
- Dimensions: 49 х154.6 х 56.1 mm.
- Compatible with Mac, Windows, Android, and Sony PlayStation
- Supports Discord, OBS, FL Studio, Skype, etc
PACKAGE CONTENT
INTRODUCTION
This device is operating on the principle “Plug and Play”. Please connect or
insert the necessary device with the correct port.
Please turn the volume down when plugging the microphone into the USB port,
and gradually increase the volume to an ideal level.
Volume up:
Clockwise (Turn right)
Volume down:
Counter-clockwise (Turn left) The indicator will be green after plugging to
the computer.
| Press the mute button to turn the mute option on. The indicator will turn
red.
---|---
| Make sure the front of the microphone points towards your mouth.
| Screw the mount to adjust the shock mount angle 180° vertically and screw
the metal ring to adjust the microphone angle 360° horizontally.
| Lorgar Voicer-521 includes a standard 1/8″ (3.5mm) headphone jack for
monitoring and playback
PLUG & PLAY
Plug the USB cable into the USB port of your computer. Your computer will automatically recognize the USB device and install a driver. The driver will be installed automatically. If the microphone is not picking up sound, please follow the instructions below:
| Problem | Solution |
|---|---|
| A computer couldn’t identify the USB devices | Please restart a computer and |
connect the microphone to another USB port.
The microphone is detected but no output of the sound| Make sure that System
Sound isn’t mute and you haven’t set a microphone
volume to a minimum.
The microphone is detected but no output of the sound after updating Windows
10| To let apps access the m microphone, please select
Settings>Privacy>Microphone, then turn on Allow apps to access your
microphone.
SAFETY INSTRUCTIONS
Read carefully and follow all instructions before using this product.
- Do not expose the device to excessive moisture, water or dust. Do not install in rooms with high humidity and dust level.
- Do not expose the device to heat: do not place it close to heating appliances, and do not expose it to direct sun rays.
- Clean the device with dry cloth only.
WARNING
It is forbidden to dismantle the device. Attempting to repair this device is
not recommended and leads to warranty waste.
WARRANTY
The warranty period starts from the day of the product purchase from Lorgar
authorized Seller. The date of purchase is the date specified on your sales
receipt or on the waybill. During the warranty period, repair, replacement or
refund for the purchase shall be performed at the discretion of Lorgar. In
order to obtain warranty service, the goods must be returned to the Seller at
the place of purchase together with proof of purchase (receipt or bill of
lading). 2 years warranty from the date of purchase by the consumer. The
service life is 2 years. Additional information about the use and warranty is
available at https://lorgar.eu/warranty-terms/
Manufacturer: Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond Court
4103 Ayios Athanasios