Lorgar Grace 855 Mesh Material Gaming Chair Black Instructions
- June 15, 2024
- LORGAR
Table of Contents
PACKAGE CONTENTS
(see figure A in the diagram)
① – base; ② – legs (5 pcs.); ③ – wheels (5 pcs.); ④ – gas lift; ⑤ – gas lift
cover; ⑥ – seat; ⑦ – backrest; ⑧ – lumbar support mechanism; ⑨ – headrest; ⑩ –
plug; ⑪ – hexagonal wrench; ⑫ – M8×25 screws (5 pcs.); ⑬ – M6×25 screws (2
pcs.); ⑭ – M6×16 screws (5 pcs.); ⑮ – protective gloves (2 pcs.); ⑯ – quick
start guide; ⑰ – diagram.
DESCRIPTION
Purpose. The Lorgar Grace 855 is an ergonomic gaming chair on wheels that
provides the user with a comfortable sitting or lounging position. For
household use.
Design features. Upholstery: mesh (polyester). Seat: width 53 cm, depth 54–59
cm. Backrest: 55×50,5 cm. Base: aluminum alloy, Ø 71 cm. Wheels (Ø 60 mm),
armrests: polyurethane.
Weight: 26 kg.
Models (colors): LRG-CHR855B (black); LRG-CHR855RB (black, red).
Functional features. Gas lift: class 4; maximum load 150 kg. Adjustable
height: seat – 51–57 cm from the floor; total height – 130–136 cm. Mechanism:
multiblock, tilt adjustment and locking. Armrests adjustable in 3 directions.
Backrest recline angle:
90–112° (plus tilt 18°). Adjustable headrest and lumbar support mechanism.
Operating conditions: temperature 0…+45 °C, relative humidity 45–75 %. Storage
conditions: temperature −20…+45 °C, relative humidity 45–75 %.
ASSEMBLY
Carefully unpack all the parts of the chair. Check the presence and quantity
of all accessories (see figure A on the diagram and the “Package contents”
section above).
Wear protective gloves when working. Use the manual tool to tighten the screws
(hexagonal wrench is included).
WARNING! Do not use mechanical tools (electric screwdrivers), do not
overtighten the screws. This can damage the mounts. Follow the steps below in
sequence (see figure B in the diagram).
- Attach the legs to the base.
- Insert the wheels into the base.
- Place the base on the floor with the wheels, insert the gas lift in it. Put the cover on the gas lift.
- Install the seat on the gas lift.
- Attach the backrest to the frame of the chair.
- Attach the lumbar support mechanism to the frame.
- Attach the headrest to the backrest. Cover the attachment point with the plug.
WARNING! After two weeks of use, check that all screw connections are tight.
ADJUSTMENT
Seat height: see figure C on the diagram. Stay in the chair to lower the seat;
stand up from the chair to raise the seat.
Backrest recline and chair tilt: see figure D in the diagram.
Lumbar support mechanism: see figure E in the diagram.
Armrests: see figure G in the diagram.
Seat depth: see figure F on the diagram. Stay in the chair to move the seat
away from the backrest; stand up from the chair so the seat is back to the
backrest.
SAFE USE GUIDELINES
To avoid personal injury and damage to the chair, it is prohibited:
- to use the chair for purposes other than its intended use;
- to sit on the edge of the seat, on the armrests;
- to stand on the chair;
- to sit in a chair with another person;
- to lean the whole body only on the backrest of the chair;
- to recline in the chair so that the base rests on only two wheels;
- to place your hands and fingers where the backrest attaches to the seat;
- to move abruptly in the chair while adjusting it;
- to exceed the permissible load on the chair;
- to push on the reclined backrest, push or spin the chair when there is a person in it.
Do not expose the chair to high temperatures, do not leave it near heaters or in the sunlight for a long time. In the event of a malfunction, contact the service center.
CARE AND MAINTENANCE
Every six months, check that the screw connections are tight. For regular cleaning, use a soft cloth (dry or slightly dampened with water). Do not use abrasive materials or harsh detergents. If the upholstery is very dirty, use a detergent specifically designed for upholstery, according to the instructions on its packaging.
TROUBLESHOOTING
If the scope of package contents does not match the list on the diagram,
contact the point of purchase. If squeaking occurs, check that the screw
connections are tight.
In the event of any malfunction, contact the point of purchase or a service
center. Do not attempt to repair the product yourself.
WARRANTY SERVICE
The warranty period starts from the moment of retail sale of the product to
the end buyer. To obtain warranty service, contact the point of purchase and
provide the product with the proof of payment. The warranty period and service
life is 2 years, unless otherwise provided by local law.
The manufacturer’s warranty for the Lorgar chairs does not cover:
- the materials prone to wear and tear (upholstery, wheel and armrests coating, belts);
- the defects resulting from natural wear and tear or natural aging of the product (scratches, dents, tears, breaks);
- the damage caused by failure to comply with the recommendations set forth in the quick start guide and the full user’s manual;
- the damage caused by improper transportation or handling by the end buyer.
WARNING! Full warranty information is available at lorgar.eu/warranty- terms.
ADDITIONAL INFORMATION
The information provided herein is subject to change without notice to users.
Up-to-date information and detailed product descriptions, certificates,
warranty terms are available in the complete user manual at lorgar.eu
/drivers-and-manuals.
Manufacturer: ASBISc Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101,
Limassol, Cyprus. Made in China.
**WARRANTY CARD
**
Product name
Serial number
Purchase date
Seller stamp
lorgar.eu/warranty-card
You can download the full-size warranty card here.