LORGAR Noah 501 Wireless Gaming Headset User Manual
- June 10, 2024
- LORGAR
Table of Contents
Noah 501 Wireless Gaming Headset
User Manual
Noah 501 Wireless Gaming Headset
EXTERIOR (see fig. A on p. 2)
- volume control wheel;
- mute button;
- LED indicator;
- multifunction button;
- USB Type-C connector;
- 3.5 mm AUX connector;
- microphone.
SPECIFICATIONS
Purpose: the Lorgar Noah 501 wireless headset is designed to play audio
from computers, gaming and mobile devices with BT and voice calls functions.
Design features: 195×185×80 mm; ABS plastic, polyurethane; retractable
microphone, volume control.
Functional features. Connection: BT (5.3, up to 10 m, 10 dBm, 0.01 W),
3.5 mm AUX cable.
Battery: non-removable, lithium polymer, 1000 mAh (power supply output: 5 V /
1 A DC); ≥300 recharge cycles; full charge: 2 hours. Autonomous work: up to 58
hours. Standby mode: up to 200 hours. Microphone: omnidirectional, (−42 ± 3)
dB. Speakers: 40 mm, (123 ± 3) dB, 20–20000 Hz, 32 Ohms. Operating and storage
conditions: temperature +10…+45 °C, relative humidity 45–85 % (non-
condensing).
Accessories: Headset LRG-GHS501, USB Type-C Cable (0.8 m), AUX cable 3.5
mm (1.5 m), quick start guide.
SAFE USE GUIDELINES
Before using the headset, set the minimum volume on your device * to avoid
hearing damage.
Do not use the headset while driving a vehicle. Do not expose to high
temperatures (from heaters or direct sunlight) or high humidity. Avoid dust or
liquids. Clean only after disconnecting from the power supply and with a dry
or slightly damp cloth only. Do not use any detergents or cleaning agents.
Don’t let it fall from a height. Do not disassemble or repair the headset by
yourself. If there are any malfunctions, please contact the service center.
GETTING STARTED
- Charging. Before the first use, fully charge the battery (see Fig. B on p. 2). While charging, the LED indicator ③ lights red; when fully charged, it goes off and the headset stops charging.
- Turning on. Press and hold the button ④ for 3 seconds until the LED indicator ③ flashes red and blue. When wired, the headset works without turning on (see fig. C on p. 3).
- Pairing. Turn on BT on your device *, locate and select “Lorgar Noah 501” for pairing. To delete the pairing information, hold down the buttons ④ and ② simultaneously for 3 seconds.
- Turning off. Press and hold the button ④ for 2 seconds, the LED indicator ③ will light red and go off.
- Other features of the buttons: see Fig. D on p. 3.
WARRANTY SERVICE
The warranty period begins on the date of purchase from an authorized Lorgar retailer. To obtain warranty service, visit the point of purchase, presenting the device and proof of payment. The warranty is 2 years, unless otherwise specified by local law. The service life is 2 years. More information about use and warranty is available at lorgar.eu/warranty-terms.
FURTHER INFORMATION.
We hereby reserve the right to change the information contained herein without noticing the end users. Please find up-to-date information and a detailed description hereof, connection and operation steps, certificates, warranty conditions in the complete user manual at lorgar.eu/drivers-and-manuals. Manufacturer: ASBISc Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101 Limassol, Cyprus. Made in China. All trademarks and brand names are the property of their respective owners.
TROUBLESHOOTING.
The speakers do not work. Check the volume level on the headset and on your
device *. Make sure that the headset is selected as the default playback
device. The microphone does not work. Make sure that the audio source has the
appropriate microphone sensitivity level. Make sure that the headset
microphone is selected as the default recording device. Check the system
settings that may compromise the best use of the microphone. Check the plug
connections for damages. When connecting the headset to your computer, update
the audio device drivers. If none of the above recommendations helped and the
headset does not work, please contact the point of sale.
These symbols indicate that you must follow the Waste Electrical and
Electronic Equipment (WEEE) and Waste Battery and Battery Regulations when
disposing of the device, its batteries and accumulators, and its electrical
and electronic accessories. According to the rules, this equipment must be
disposed of separately at the end of its service life. Do not dispose of the
device, its batteries and accumulators, or its electrical and electronic
accessories together with unsorted municipal waste, as this will harm the
environment. To dispose of this equipment, it must be returned to the point of
sale or turned in to a local recycling facility. You should contact your local
household waste disposal service for details.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>