LORGAR LRG-CMT931 Pro Audio Condenser USB Microphone Instruction Manual
- June 6, 2024
- LORGAR
Table of Contents
LORGAR LRG-CMT931 Pro Audio Condenser USB Microphone Instruction Manual
Dear customer!
Thank you for choosing our products.
www.lorgar.eu
FEATURES
- Power Supply: 5V
- Polar Pattern: Uni-directional
- Frequency Response: 50hz—18Khz
- Sensitivity: -40dB±3dB
- Max.SPL: 110dB(at 1kHz≤1% T.H.D)
- S/N Ratio: 70dB (A-weighted)
- Sampling Rate: 44.1K/48kHz
- Electrical Current: 75±5mA
- Plug and Play system
- High quality sound
- Robust/Sturdy metal design
- 2,5 m length USB cable A-male to Type С male
- Tripod to adjust the tilt. Adjustable the shock mount angle 180° vertically and 360° horizontally
- Various mount options: adjustable tripod or pantograph
- Passive sound protection: detachable pop-filter and shock mount
- Volume knob
- Tap-to-mute with LED indicator
- Polar Pattern: Unidirectional или Cardiod
- Nickel plated. Diaphragm
- Headphone jack Audio connect headphones
- Ability to adjust the output level directly on the microphone
- Works with: Mac, Windows, Android and PlayStation
- Compatible with Discord, OBS, FL Studio, etc.
- Dimensions: 49×154.6×63.4 mm
- Weight:159.3 g
PACKAGE CONTENT
TRIPOD MOUNTING MANUAL
- Screw the lower part of the C-clamp until it is tight and secure.
- Insert the desktop boom arm into the hole.
- Fasten the screw.
- Open the boom arm.
- Adjust the height, then fix the screw ⑤.
- Adjust the screw ⑥ then fix it.
- Fix the adapter to the boom arm.
- Fix shock mount with boom arm.
- Put the mic on the shock mount.
- Screw the metal nut to the buttom of mic to fix the mic on the shock mount.
- Screw the pop filter screw to fix to the tripod stand, then tighten the screw. Adjust the pop filter position.
INTRODUCTION
This device is operating on the principle “Plug and Play”. Please connect or insert necessary device with correct port.
Please turn the volume down when plugging the microphone into the USB port, and gradually increase the volume to an ideal level.
Volume up:
Clockwise (Turn right)
Volume down:
Counter-clockwise (Turn left)
The indicator will be green after plugging to the computer.
Press the mute button to turn the mute option on. The indicator will turn red.
Make sure the front of the microphone points towards your mouth.
Screw the mount to adjust the shock mount angle 180° vertically and screw the metal ring to adjust the microphone angle 360° horizontally.
Lorgar Voicer 931 includes a standard 1/8″ (3.5mm) headphone jack for monitoring and playback
PLUG & PLAY
Plug the USB cable into the USB port of your computer. Your computer will automatically recognize the USB device and install a driver. The driver will be installed automatically. If the microphone is not picking up sound, please follow the instructions below:
SAFETY INSTRUCTIONS
Read carefully and follow all instructions before using this product.
- Do not expose the device to excessive moisture, water or dust. Do not install in rooms with high humidity and dust level.
- Do not expose the device to heat: do not place it close to heating appliances, and do not expose it to direct sun rays.
- Clean the device with dry cloth only.
WARNING
It is forbidden to dismantle the device. Attempt to repair this device is not recommended and leads to warranty waste.
WARRANTY
The warranty period starts from the day of the product purchase from Lorgar authorized Seller. The date of purchase is the date specified on your sales receipt or on the waybill. During the warranty period, repair, replacement or refund for the purchase shall be performed at the discretion of Lorgar. In order to obtain warranty service, the goods must be returned to the Seller at the place of purchase together with proof of purchase (receipt or bill of lading). 2 years warranty from the date of purchase by the consumer. The service life is 2 years. Additional information about the use and warranty is available at https://lorgar.eu/warranty-terms/
Manufacturer: Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond Court 4103 Ayios Athanasios
According to local regulations, your product and/or its battery must be disposed of separately from household waste. When this product has reached the end of its service life, take it to a recycling facility designated by local authorities.
