LORGAR LRG-CHR533B Embrace 533 Eco Leather Gaming Chair Instruction Manual
- June 15, 2024
- LORGAR
Table of Contents
**LORGAR LRG-CHR533B Embrace 533 Eco Leather Gaming Chair Instruction Manual
**
PRODUCT VIEW
PACKAGE CONTENTS
(see figure B on the diagram)
| ① – base | ⑥ – mechanism | ⑪ – M5×16 screws (2 pcs.) | ⑭ – head pillow |
|---|---|---|---|
| ② – wheels (5 pcs.) | ⑦ – handles (left, right) | ⑫ – plugs (2 pcs.) | ⑮ – |
protective gloves (2 pcs.)
③ – gas lift| ⑧ – backrest| ⑬ – M8×25 screws with washers (16 pcs., screwed
into the seat and backrest)| ⑯ – quick start guide
④ – seat| ⑨ – covers (2 pcs.)| ⑰ – scheme
⑤ – armrests (left, right)| ⑩ – universal tool
DESCRIPTION
Intended use. Lorgar Embrace 533 is an ergonomic gaming chair on wheels
that provides the user with a comfortable sitting or lounging position. For
household use.
Design features. A head pillow, adjustable lumbar support. Upholstery:
eco-leather (polyurethane). Filling: cold molded foam (polyurethane foam).
Frame: metal, thickness 1.8 mm. Seat: 47×52 cm. Backrest: 83× 54 cm. Base:
aluminum alloy, Ø 70 cm. Wheels (Ø 75 mm), armrests: polyurethane. Weight:
25.2 kg.
Models (colors): LRG-CHR533B (black); LRG-CHR533BR (black, red).
Functional features. Gas lift: class 4; maximum load 150 kg. Adjustable
height: seat – 47–54 cm from the floor; total height – 123.5–130.5 cm.
Mechanism: multiblock, tilt adjustment and locking. Armrests adjustable in 4
directions. Backrest recline angle: 90–155°.
Operating conditions: temperature 0…+45 °C, relative humidity 45–75 %.
Storage conditions: temperature −20…+45 °C, relative humidity 45–75 %.
ASSEMBLY
Carefully unpack all the parts of the chair. Check the presence and quantity
of all accessories (see figure B on the diagram and the “Package contents”
section above).
Wear protective gloves when working. Use the manual tool to tighten the screws
(universal tool is included).
WARNING! Do not use mechanical tools (electric screwdrivers), do not overtighten the screws. This can damage the mounts.
Follow the steps below in sequence (see figure A on the diagram).
WARNING! To secure the armrests, mechanism and backrest, previously, unscrew the screws installed in the mounting points.
-
Insert the wheels into the base.
-
Place the base on the floor with the wheels, insert the gas lift in it.
-
Mount the armrests (left, right) to the seat. It is recommended to use a suitable support (for example, a box from a chair, a stool).
-
Mount the mechanism. Install the handles on it.
-
Install the seat on the gas lift.
-
Attach the backrest to the rails on the seat.
WARNING! Screw in the screws on both sides about halfway, and then tighten them little by little one by one so that the backrest locks into place strictly in the center of the seat, without shifting toward one of the rails. -
Fasten the plastic covers to the backrest rails, close the screws with the plugs.
WARNING! After two weeks of use, check that all screw connections are tight.
ADJUSTMENT
Armrests: see figure C on the diagram.
Seat height: See figure D on the diagram. Stay in the chair to lower
the seat; stand up from the chair to raise the seat.
Chair tilt. Resilience adjustment, tilt lock/unlock: see figure E on
the diagram.
Backrest recline angle: see figure F on the diagram.
WARNING! To avoid a fall, recline the backrest to the lounging position
only if the tilt mechanism is previously locked (when the frame is upright).
Lumbar support: see figure G in the diagram. If desired, mount or
remove the pillow (see figure G on the diagram).
SAFE USE GUIDELINES
To avoid personal injury and damage to the chair, it is prohibited:
- to use the chair for purposes other than its intended use;
- to sit on the edge of the seat, on the armrests;
- to stand on the chair;
- to sit in a chair with another person;
- to lean the whole body only on the backrest of the chair;
- to recline in the chair so that the base rests on only two wheels;
- to place your hands and fingers where the backrest attaches to the seat;
- to move abruptly in the chair while adjusting it;
- to exceed the permissible load on the chair;
- to push on the reclined backrest, push or spin the chair when there is a person in it;
- to recline the backrest to the lounging position if the tilt mechanism is not previously locked when the frame is upright.
Do not expose the chair to high temperatures, do not leave it near heaters or in the sunlight for a long time.
CARE AND MAINTENANCE
Every six months, check that the screw connections are tight. For regular cleaning, use a soft cloth (dry or slightly dampened with water). Do not use abrasive materials or harsh detergents. If the upholstery is very dirty, use a detergent specifically designed for upholstery, according to the instructions on its packaging.
TROUBLESHOOTING
If the scope of package contents does not match the list on the diagram,
contact the point of purchase. If squeaking occurs, check that the screw
connections are tight.
In the event of any malfunction, contact the point of purchase or a service
center. Do not attempt to repair the product yourself.
WARRANTY SERVICE
The warranty period starts from the moment of retail sale of the product to the end buyer. To obtain warranty service, contact the point of purchase and provide the product with the proof of payment. The warranty period and service life are 2 years, unless otherwise provided by local law.
The manufacturer’s warranty for the Lorgar chairs does not cover:
- the materials prone to wear and tear (upholstery, wheel and armrests coating, belts);
- the defects resulting from natural wear and tear or natural aging of the product (scratches, dents, tears, breaks);
- the damage caused by failure to comply with the recommendations set forth in the quick start guide and the full user’s manual;
- the damage caused by improper transportation or handling by the end buyer.
WARNING! Full information about warranty is available at lorgar.eu /warranty-terms.
ADDITIONAL INFORMATION
The information provided herein is subject to change without notice to users. Up-to-date information and detailed product descriptions, certificates, warranty terms are available in the complete user manual at lorgar.eu /drivers-and-manuals. Manufacturer: ASBISc Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101, Limassol, Cyprus. Made in China.
WARRANTY CARD
Product name
Serial number
Purchase date
Seller stamp
You can download the full-size warranty card here.