Hanwha Vision WAVE-S2NETBOX-INT Wisenet WAVE OVID Service for LenelS2 NetBox User Guide

Hanwha Vision WAVE-S2NETBOX-INT Wisenet WAVE OVID Service for LenelS2

NetBox

Integration Manual

Wisenet WAVE

OVID Service for LenelS2 NetBox Integration Manual

Introduction

The Wisenet WAVE OVID Service for LenelS2 NetBox integrates your Wisenet WAVE video management system into LenelS2’s NetBox Access Control system. This integration allows for the mapping of Wisenet WAVE video resources to NetBox access control resources and the viewing of video within the NetBox web user interface via Wisenet WAVE camera events.

Specifications and Requirements

LenelS2 NetBox

• Version 5.6.2 or higher
• LenelS2 Integration License: Part # S2-VMS-B-HW (includes 4 cameras)
• LenelS2 camera licenses: Part # S2-VMS-C-HW

Wisenet WAVE VMS

• Version 5.0.0.35745 or higher
• Hanwha Vision OVID service license: Part # WAVE-S2NETBOX-INT

Creating a NetBox user in Wisenet WAVE VMS

In many situations, it will be more efficient to only utilize specific Wisenet WAVE video resources with your LenelS2 NetBox integration. This ensures that only necessary video resources are utilized during the integration. To do this, it is recommended that a new Wisenet WAVE user with limited camera viewing permission is created.

Follow the steps below to create and configure the NetBox user in Wisenet WAVE VMS using the Wisenet WAVE Desktop Client application.

1. Create a new user in Wisenet WAVE. In this example, we created a user called “ netbox ”
2. For Role, select “ Custom “, then “Edit Roles”.

3. Click on “ New role “.

4. Give the new role a name in this example we named it “ NetBox “.

5. Under the “ Permissions ” tab, select all the check boxes

6. Under the “ Camera & Resources” tab, select the cameras to be brought into NetBox.

7. Click “ OK ” to save the new Role and exit the setup.

8. The “ New User ” screen will now allow you to select the new Role. Click “ OK ” when done.

9. Reveal the drop down menu next to “ Enabled ” and select “ Allow digest authentication for this user.”

10. If prompted, reenter the password for this user and click “ OK ” when done.

Configuring Camera Events in Wisenet WAVE VMS for Use with LenelS2 NetBox

Once the integration between Wisenet WAVE VMS and LenelS2 NetBox is established, Wisenet WAVE VMS will have the ability to send certain events to NetBox. The events used to pass video between Wisenet WAVE VMS and LenelS2 NetBox can be configured using Wisenet WAVE’s Rules and Events Engine.

Follow the steps below to configure camera events within Wisenet WAVE VMS for use with your NetBox integration.

1. In the Wisenet WAVE Resource Panel, right-click the camera which will be used to generate the event.

2. Select “ Camera Rules ” from the context menu.

3. Configure the appropriate fields:

a. When: the event category to be configured
b. At: the camera(s) that will trigger the event
c. Event Type: the event type to be triggered (Note: not all events listed under “When” will list an event here).
d. Action: set to “Write to log.”
e. Interval of action: set this to dictate how often the event will be written to the log (and be sent to NetBox). Example: if set to 5 seconds, if an event is triggered more than once in 5 seconds, it will only be written to the log once.

Installing and Configuration of the Wisenet WAVE VMS OVID Service for

NetBox

Please refer to LenelS2’s LenelS2-TechNote64_Integrating_Hanwha document located on the LenelS2 website as well as under the LenelS2 NetBox page at:

https://hanwhavisionamerica.com/software/integrations/

Licensing the Wisenet WAVE VMS OVID Service for NetBox

A license is needed in order for WAVE to communicate with NetBox that can be obtained through your usual sales channel.
Once the license is received, you will need to use the HVA License Manager found on our website at:
https://hanwhavisionamerica.com/product/hva-license-manager/
Please follow the steps in the HVA License Manager documentation for instructions on installing and applying the license.

Hanwha Vision America

500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666
Toll Free : +1.877.213.1222
Direct : +1.201.325.6920
Fax : +1.201.373.0124
www.HanwhaVisionAmerica.com

© 2023 Hanwha Vision Co., Ltd. All rights reserved.
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Hanwha Vision Co., Ltd.

• Wisenet is the proprietary brand of Hanwha Vision, formerly known as Hanwha Techwin.

FAQ

Q: Where can I find additional support or assistance?

A: For further support or assistance, you can reach out to our customer service team at support@hanwhavisionamerica.com or visit our website for more resources.

References

• Hanwha Vision - Innovative Video Surveillance Systems
• Hanwha Vision - Innovative Video Surveillance Systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>