Lorgar Noah 701 Gaming Headsets User Manual
- June 10, 2024
- LORGAR
Table of Contents
28.10.2022 | Version 1.0.3
A
B
C
D
E
EXTERIOR (see fig. A)
- volume control wheel;
- mute button;
- LED indicator;
- multifunction button;
- USB Type-C connector;
- 3.5 mm AUX connector;
- microphone;
- USB-dongle’s LED indicator;
- USB-dongle’s function button;
- USB-dongle.
SPECIFICATIONS
Purpose: The Lorgar Noah 701 is a wireless headset to play audio off your computer, gaming or mobile device with BT function and voice calls.
Design features: 195×185×80 mm; ABS plastic, polyurethane; retractable microphone; volume control.
Functional features. Connection: BT (5.1, up to 10 m, 10 dBm, 0.01 W), 3.5 mm AUX cable. Battery: non-removable, lithium polymer, 1000 mAh (power supply output: 5 V / 1 A DC); ≥300 recharge cycles; full charge: 2 hours. Autonomous work: up to 40 hours. Standby mode: up to 76 hours. Microphone: omnidirectional, (-42 ± 3) dB. Speakers: 40 mm, (123 ± 3) dB, 20-20000 Hz, 32 Ohms. Operating and storage conditions: temperature +10…+45 °C, relative humidity 45-85 % (non-condensing).
Scope of supply: headset LRG-GHS701, USB cable Type-C (0.8 m), 3.5 mm AUX cable (1.5 m), USB-dongle, quick start guide.
SAFE USE GUIDELINES
Before using the headset, set the minimum volume on your device * to avoid hearing damage. Do not use the headset while driving a vehicle. Do not expose to high temperatures (from heaters or direct sunlight) or high humidity. Avoid dust or liquids. Clean only after disconnecting from the power supply and with a dry or slightly damp cloth only. Do not use any detergents or cleaning agents. Don’t let it fall from a height. Do not disassemble or repair the headset by yourself. If there are any malfunctions, please contact the service center.
GETTING STARTED
1. Charging. Before the first use, fully charge the battery (see fig. B). While charging, the LED (3) indicator lights red; when fully charged, it goes off and the headset stops charging.
2. Turning on. Press and hold the button (4) for 3 seconds until the LED indicator (3) flashes red and blue. When wired, the headset works without turning on (see fig. C).
3. Pairing. Turn on BT on your device *, locate and select “Lorgar Noah 701” for pairing. To delete the pairing information, hold down the buttons (4) and (2) simultaneously for 3 seconds.
4. Connecting to a PC, PS4 / PS4 Pro / PS5, Nintendo Switch. Insert the USB-dongle into the USB port of the device (see fig. D), and the driver will be installed automatically. Hold down the button (4) for 3 seconds until the LED indicator (3) stops flashing. Select the headset “Lorgar Noah 701” in the sound settings on the device .
5. Turning off. Press and hold the button (4) for 2 seconds, the LED indicator (3) will light red and go off.
6. Other functional features of the buttons: see fig. E 3.
FURTHER INFORMATION.
We hereby reserve the right to change the information contained herein without noticing the end users. Please find up-to-date information and a detailed description hereof, connection and operation steps, certificates, warranty conditions in the complete user manual at lorgar.eu/drivers-and- manuals. Manufacturer: ASBISc Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101 Limassol, Cyprus. Made in China. All trademarks and brand names are the property of their respective owners.
- Device means a computer, a laptop, a tablet, a smart TV, etc.
TROUBLESHOOTING
The speakers do not work. Check the volume level on the headset (volume control wheel (1) ) and on your device . Make sure that the headset is selected as the default playback device. The microphone does not work. Make sure that the correct microphone sensitivity level is set on your device . Make sure that the headset microphone is selected as the default recording device. Check system privacy settings that may restrict microphone use. Check if the plugs are connected properly. Check the cable and plugs for damage. When connecting the headset to your computer, update the audio device drivers. The headset does not connect wirelessly. Hold down button (9) for 3 seconds or reconnect the USB-dongle. If none of the above recommendations helped and the headset does not work, please contact the point of sale.
WARRANTY TERMS
The warranty period shall begin as of its purchase from an authorized Lorgar retailer. To enjoy the right to have warranty service performed during the warranty period, please visit the point of sale, and have your headset and the proof of payment with you. The warranty is 2 years, unless otherwise specified by local law. The service life is 2 years. For more information about use and warranty, see lorgar.eu/drivers-and-manuals.
These symbols indicate that you must follow the Waste Electrical and Electronic Equipment (WEEE) and Waste Battery and Battery Regulations when disposing of the device, its batteries and accumulators, and its electrical and electronic accessories. According to the rules, this equipment must be disposed of separately at the end of its service life. Do not dispose of the device, its batteries and accumulators, or its electrical and electronic accessories together with unsorted municipal waste, as this will harm the environment. To dispose of this equipment, it must be returned to the point of sale or turned in to a local recycling facility. You should contact your local household waste disposal service for details.