LINDY 73309 10 Port USB Charging Station User Manual
- June 6, 2024
- LINDY
Table of Contents
LINDY 73309 10 Port USB Charging Station User Manual
Safety Instructions
! WARNING !
Please read the following safety information carefully and always keep this document with the product.
Failure to follow these precautions can result in serious injuries or death from electric shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock, which may result in death.
This device is a switching type power supply and can work with supply voltages in the range 100 – 240 VAC. For worldwide usability four different power cables are enclosed: Euro type, UK type, US/Japan type and Australia/New Zealand type. To reduce risk of fire, electric shocks or damage:
- Do not open the product nor its power supply. There are no user serviceable parts inside.
- Only qualified servicing personnel may carry out any repairs or maintenance.
- Never use damaged cables.
- Do not expose the product to water or places of moisture.
- Do not use this product outdoors it is intended for indoor use only.
- Do not place the product near direct heat sources. Always place it in a well-ventilated place.
- Do not place heavy items on the product or the cables.
- Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
Introduction
Thank you for purchasing the Lindy 10 Port USB Charging Station. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
This USB Charging Station allows charging of up to 10 mobile phones, tablets, or other USB devices. Each port has a maximum power output of 2.4A, or 1.8A if all ports are populated. The in-built Smart Charging function automatically adjusts the charging power to the connected device´s demand.
Package Contents
- 10 port USB charging station
- 11 plastic separators
- 12V 8A PSU with 4 country specific power cables for EU/US/UK/AUS
- This user Manual
Features
- Charges up to 10 mobile phones, tablets, or other USB devices
- Maximum power output 2.4A / 1.8A, if all 10 ports are used at the same time
- BC standard 1.2 supports fast charging
- Smart charging automatically adjusts the charging power to the connected device´s demand and protects devices from damage caused by overcharge
- Interfaces: 10 x USB Type A
- One LED for power
- Adjustable separators allow different widths for different tablet/mobile phone sizes
Installation & Operation
Plug the DC connector of the included power supply into the DC socket of the USB Charging Station. Then connect the power supply to the mains socket using one of the country specific power cables and the Power LED will light up.
Insert the plastic separators into the grooves of the charging station and
adjusting the width suitable to the width of your devices.
Now you can connect the devices, which should be charged, to the USB ports.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE requirements.
CE Konformitätserklärung
LINDY erklärt, dass dieses Equipment den europäischen CE-Anforderungen
entspricht
UKCA Certification LINDY declares that this equipment complies with relevant
UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the international Standard IEC 60950-1 or 60065 or 62368-1.
Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com ,
T: +49 (0)621 470050
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk, T: +44 (0)1642 754000
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process.
Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.
Tested to comply with
FCC standards.
For home and office use
No. 73309
2nd Edition, June 2021
lindy.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>