NEEWER BH-10S LED Light for Live Show Instruction Manual
- June 6, 2024
- NEEWER
Table of Contents
NEEWER BH-10S LED Light for Live Show
Radio Frequency Remote Controll
This lighting kit is equipped with radio frequency remote control,which
channel is 433.
The rf remote control maximum distance is 15 meters.
The RF remote control is used one to one wit light. Wrong combination will
make the lighting kit not working.
Packing Accessories
A. RF remote control 2
B. Ball head 2
C. Light 2
D. Selfie Stick 2
E. Color chip * 6
Installation instructions
Color plastic sheet is loaded
Product Information
The BH-1 OS has 72 pcs premiun LED beads .output is lOW,Power supply with USB.Easy to assemble and carry,Multi-color plastic film can meet the needs of a variety of lighting shooting.
Model Parameter List
| Model | BH-10S |
|---|---|
| Output Power | 10W |
| Output Power | 1000LM |
| Luminous Plux | 72PCS |
| Led Quantity | 5600K |
| Dimmer | 10%- 100% |
| DC power input | USB 5v/2A |
Opearation
① UP key
Press once to increase the brightness by 10%, long press brightness will
increase to 100%.
② ON/OFF key
Press once to turn it on or off. The default brightness is maximum
③ DOWN key
Press once to reduce the brightness by 10% , long press brightness will reduce
to 10%.
Remote Control Operation
-
ON/OFF key
Press once to turn it on or off. The default brightness is maximum. -
UP key
Press once to i ncrease the brightness by 100%, long press brightness will increase to 100%. -
Down key
Press, once to reduce the brightn,ess by- 10% long press brightness will reduce to 10%.
FCC Rules
Th is device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiale rddio
frequency energy and, if nol inslalled and used in accordance wilh the
inslruclions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the device
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment