NEEWER RF-300 2.4G Wireless Remote Control User Manual
- June 6, 2024
- NEEWER
Table of Contents
RF-300 2.4G Wireless Remote Control
User Manual
Six-key remote control operation manual
The latest upgraded LED dual-color remote control adopts a standard 2.4G data
package to realize the adjustment of brightness and color temperature.
Specifications:
- Shell material: ABS material
- Remote control battery: AAA dry battery
- Working for frequency band: 2.4~2.4835Ghz
- RF frequency: 5-8dbm
- Standby power consumption: 8 uA
- Product size: 1153812mm
- Net weight of remote control: 20g
- Point-to-point communication distance: more than 20 meters in an open place
Remote control function:
- Single point: increase the brightness by one level, long press: increase the brightness infinitely
- Single point: reduce the brightness by one level, long press: reduce the brightness infinitely
- Single point: increase the color temperature by one level, long press: increase the color temperature infinitely
- Single point: reduce the color temperature by one level, long press: reduce the color temperature infinitely
- Single point: turn on the lamp button, after the lamp is powered on, quickly and long press for code matching
- Single point: turn off the button, after the lamp is powered on, quickly press and hold to clear the code
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>