HAMRON 619-654 Windscreen Protector Instruction Manual
- June 6, 2024
- HAMRON
Table of Contents
HARMON 619-654 Windscreen Protector
Read the operating instructions carefully before use.
Save them for future reference.
Congratulations on your purchase of our windscreen protector, we are glad you
chose Jula AB as your supplier.
DESCRIPTION
Windscreen protector with magnetic fasteners to provide protection from
heat and ice.
USE
NOTE : Clean the vehicle before use to avoid damaging the paintwork.
Place the windscreen protector in the required position and fasten with the
supplied magnets as shown in the diagrams below. If the magnets need moving,
lift them off. Pulling them could scratch the paintwork. The windscreen
protector can also be fastened by folding it in behind the A-pillars on the
car and fastening it inside the front doors.
Important : Do not use the windscreen protector in severe weather and strong winds, the power of the magnets to hold it in place is limited. The car can also be damaged if strong winds cause the windscreen protector to move, whereby sand and other debris can have a scratching effect on the paintwork.
MAINTENANCE
Cleaning
Clean the windscreen protector from sand and other particles that can damage
and scratch the car before putting into storage and before use. Use water and
if necessary a mild soap solution. Do not use strong chemicals as this can
affect the appearance and durability of the windscreen protector.
Storage
Put the windscreen protector in the supplied bag and store in a dry and safe
place.