ULINE Boltless Shelving Installation Guide
- June 7, 2024
- ULINE
Table of Contents
ULINE Boltless Shelving
TOOL NEEDED
Rubber Mallet
PARTS
Upright Post x 4 (A)
|
Upright Post x 4 (A)
---|---
Front/Back Support x 10
(C)
|
Board x 5 (D)
ASSEMBLY
NOTE: Lean posts against a wall or assemble with another person.
-
Connect two upright posts (A) by inserting a side support piece (B) at the bottom, middle and top of the posts. ( See Figure 1a )
NOTE: The side support must be inserted so that the flat surface is on top. ( See Figure 1b ) -
Repeat step one for the other two upright posts.
NOTE: Each side has three side supports. Each shelving unit has six side supports. -
Connect the two upright post assemblies by inserting front/back supports (C) at the bottom, middle and top of each upright post (A). ( See Figure 2a )
NOTE: The front/back support must be inserted so the inner v-channel is facing up. ( See Figure 2b )
-
Attach the remaining front/back supports (C) at the desired shelf levels. ( See Figure 3 )
NOTE: Ensure all supports are fully seated.
NOTE: Completed unit has 10 front/back supports and six side supports.
-
Set boards (D) on top of supports. ( See Figure 4 )
Documents / Resources
|
ULINE Boltless
Shelving
[pdf] Installation Guide
Boltless Shelving
---|---
References
- Uline.ca - Shipping Boxes, Shipping Supplies, Packaging Materials, Packing Supplies
- Uline.mx - Cajas para Envíos, Materiales de Empaque, Materiales de Empaque, Suministros para Empaque