Maoifaec

Maoifaec 20W Wireless Bluetooth Speaker, Portable Bluetooth Speaker

Specifications

• BRAND: Maoifaec
• MODEL NUMBER: S3
• SPEAKER MAXIMUM OUTPUT POWER: 20 Watts
• CONNECTIVITY TECHNOLOGY: Bluetooth
• WATERPROOF PROTECTION: IPX7
• PLAYTIME: 24H
• BLUETOOTH: 5.0
• PRODUCT DIMENSIONS: 7.28 x 2.17 x 2.36 inches
• ITEM WEIGHT: 15.1 ounces

Introduction

Whether it’s your first Bluetooth speaker or a backup speaker, this is a great option for a budget-friendly speaker. Try it for yourself to discover the reasons why this one is so well-liked. Bluetooth 5.0 has a quicker transmission rate and a steadier, delay-free signal. Widely compatible with a variety of gadgets, including tablets, computers, TVs, and mobile phones. With this Bluetooth speaker, you can take immersive sound with you everywhere you go. It is genuinely portable. Because the S3 speaker is IPX7 waterproof, you don’t have to worry about it getting wet in the rain while you’re at the beach, in the toilet, or near a wild stream.

WHAT’S IN THE BOX

• 1* AUX-in Line
• 1* Charging Cable
• 1* Product Instruction

HOW TO PAIR

• From the top of the screen, swipe downward.
• Touch Bluetooth and hold it.
• To pair a new device, tap. If Pair new device isn’t there, go under “Available devices” or hit More. Refresh.
• Select the Bluetooth device you want to associate with your device by tapping its name.
• Observe any directions displayed on the screen.

HOW TO RESET

You should only need to do this briefly with most Bluetooth speakers. The power and Bluetooth buttons must be pressed and held simultaneously in order for almost every Bluetooth speaker to be reset.

HOW TO FIX A SPEAKER THAT WON’T TURN ON

• Check to see if your speaker has enough power.
• Make sure the USB AC adapter is firmly (not loosely) attached to the speaker and the wall outlet.
• Hold down the power button while waiting for the speaker to start up.

HOW TO CHECK BATTERY PERCENTAGE

Simply pair and connect the Bluetooth gadget to your phone is all that is required. After doing so, launch the Settings app and select Connect Devices. Click Bluetooth (not the switch next to it). With certain exclusions, you will receive a complete list of all connected devices along with their current battery levels.

Frequently Asked Questions

How can I activate pairing mode on my speaker?

Choose Bluetooth options from the settings menu on your phone (both Android and iOS). Under Bluetooth settings, navigate to the other devices area. Ensure that discoverable mode is selected on your phone. Choose the speaker you want to pair by clicking on it under “other devices.”

How can I tell when the battery in my Bluetooth speaker is full?

A row of LED lights on the front of your speaker will turn on once it is plugged in and remain on until charging is finished.

Why won’t my Bluetooth pair?

Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.

Could a Bluetooth speaker be overcharged?

Modern batteries have sophisticated sensors that prevent overcharging, but this does not guarantee that leaving the battery hooked into the charger won’t harm it. One charging cycle is finished when a battery is fully charged; a battery can only be fully charged a certain number of times before it is irreparably harmed.

My Bluetooth speaker is charging, but can I use it?

Yes. Without endangering the battery, you can use your Bluetooth speaker while it is charging. When using the speaker for the first time, you should fully charge it while it is off so that you may check the battery life.

Why is pairing discouraged?

If the battery level is too low, smart power management features on some devices may disable Bluetooth. Check the battery life of the device you’re attempting to associate with and your phone or tablet if they’re having trouble pairing.

What is the Bluetooth pairing passcode?

When partnering with another Bluetooth® device, use the code 0000. Depending on the Bluetooth device being used, the passcode may display as Pass key, PIN code, PIN number, or Password.

What’s going on when my Bluetooth speaker won’t switch on or charge?

Installing software updates, replacing the battery, purchasing a new cable, repairing a fractured solder joint, replacing the charging port, and replacing the charging circuit are all necessary fixes for a Bluetooth speaker that won’t charge.

Why won’t my mobile speaker work?

Both devices’ volumes should be turned up. Ensure that the music is playing on your source device. Move the Bluetooth speaker as far away from metal objects and other potential interference-causing gadgets as you can. Make sure nothing is plugged into the wireless speaker’s AUDIO IN port.

Where can I locate my pairing code?

On your smartphone, launch the Home Network Security application. Tap Settings from the menu icon. Look under ACCOUNT for the Pairing Code.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>