rombica BH-T012 Headphones Mysound Free Pro Black User Manual

rombica BH-T012 Headphones My sound Free Pro Black

Thank you for purchasing the Rombica device. Please read this user manual before the operation and save it for the future.

SPECIFICA110N

• Power(case): DC SV, from battery

• Bluetooth version: vS.O

• Touch con1rol: yes

• Built-in microphone: yes, in each earphone

• Frequency range: 20 Hz~ 20 kHz

• Driver power: 5 mW

• Driver diameter: 13 mm

• Senslllvlty: 99 dB t 3 dB

• lmpe<lance: 32 Ohm
  Battery (earphones: 40 mAh I 3. N

• Battery (charging case): 350 mAh 13. N

• In the box: earphones, charging case, USB ca Ille, extra silicone NPS, manual

GENERAL INFORMATION

1. Touch control area
2. Earphones LED indicator
3. E.arphones m.agrietic: contacts
4. Charging case magnetic contacts
5. Type-C port for charging the charging case
6. Extra silicone tip

OPERATION OF rnE DEVICE

POWER ON
Earphones will automatically turn on when you take them out of the t: charging t:c!se• “ff charging case is discharged. earphones will not tum on automaticity. Jr, this rose, you con top the Such
control area on bot/I eatphot1es tag ether for 3 seconds to Wm on
POWER OFF
Earphones will automatically turn off when you put tl1em in the charging case. Also, you can t.ap the touch control area on bottle earphones together far 5 seconds to turn off.

PARING VIA BLUETOOTH

1. Take earphones out of the charging case.
2. Two earphones will pair with ead1 other automatically.•
3. Oper, Bluetooth setting on your smartphone, enable Bluetooth and search for new devices. When Bluetooth earphones fou11d, confirm pairing.
4. After successful pairing both the Bluelootli earphones and your device, you can control playback by Bluetooth earphones touch control area.

MONO USE

You can use only one earphone if needed.

1. Take any of the earphones out of the charging case.
2. The earphone will be in pairing mode automatically.•
3. Open Bluetooth setting on your smartphone, enable Bluetooth and search for new devices.
4. After successfully pairing both the earphone and your device, you can control playback by Bluetooth earphone touch control area.

TOUCH COMMANDS

You can control the earphones by touch commands.

1. Play/pause – tap the touch control area once on any of the earphones.
2. Play previous song – lap the touch control area twice on left earphones.
3. Play next song -tap the touch, control area twice on the right earphone.
4. increase volume – tap the touch control area 3ttmes on the right earphone.
5. Decrease volume – tap the touch control area 3 times on the left earphone.
6. Receive the incoming call -tap the touch control area once on any of the earphones Then someone Is calling.
7. Finish the call – tap the touch control area once lime on any of ear, ones in call mode.
8. Reject the Incoming call -tap the touch control area twice on any of the earphones when someone is calling.
9. Activate YOice assistant – tap Chetcuti control area for 2 seconds Of left earphone.

ANC MODE

When taking the earphones out of the charging case, It ls in regular Blue1ooth mode.
1. Tap the touch control area for 2 seconds on the right earphone to enter Transparent mode.
2. Tap the touch control area for 2 seconds on the right earphone to tum on ANC.
3. Tap the touch control area for 2 seconds on the right earphone to tum off ANC.

EARPHONES CHARGING

To ch~rge earphones put them In the ch~rglng case and close the Close. Magnetic collects on earphones should match with magnetic contacts on the charging case. LED Indicator on bath earphones is light while charging and turns blue when the battery is fully charged.

CHARGING THE CASE

Before first use, ful~ charge the charging case within 6 hours. The new battery requires 2-3 full charge-discharge cycles to reach full capacity. Use (supplied) cable end connect it to the charging case

SAFETY INFORMATION

1. Before charging the case be sure that the voltage of the power Is 5V. The recommended adopter is 5V l1COOmA.

2. If device rs riot used during 10119 times. d7arge rt at least once per month •

3. In case of breaking do not try to open and repair the device by yourself. Use service center.

4. Avoid the influence of the high humidity, dust, and dirt. Use dry soft lint-free doth ta clean the device. Not allowed to use washing or cleaning liquids.

5. Do not store, use or charge devices near heal sources and flammable objects, during low or high ambient temperature. Charging can be done only ur1der adult supervision. Recommended
   temperature Is 5 tn 35 ‘C.

6. Not allowed tn drop or hit device.

7. Do not insert foreign objects 10 the device interfaces.

8. Never pull the cord to disconnect the cable, pull the Ule plug.

9. TWS earphones is not intended for commercial use.

10. S1andard battery life~ 500 charge-discharge cycles. Mer eKCee<ling 500 cycles the effective capacity of the battery can be reduced. Effective capacity also depends on the ambient temperature.

11. Keep the charging case closed wllen you slcrage the device.

STORAGE CONDITIONS

Keep the device in a dry, well-ventilated place, far from leaders and direct sunlight Keep the device out of reach of children. Do not bite or lid( device, as it may cause damage or explode the device. Children or persons with should not use the device without the supervision of the responsible person.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>