rombica NQ-00350 Wireless Charger User Manual
- June 6, 2024
- rombica
Table of Contents
rombica NQ-00350 Wireless Charger
GENERAL INFORMATION
- Surface for wireless charging
- LED Indicator
- USB Input
SPECIFICATION
- INPUT: USB 5V/2A:, 9V/1.6A
- OUTPUT: sn.snow
- IN THE BOX: wireless charger, user manual
- Fast charge. Supports up to 10W wireless charging•
It Is necessary to use Quick Charge 2.0/3.0 wall charger (not Included) to
charge In fast mode (10W) . Works with QI-compatible devices If your device Is
not
Qi-compatible, it Is necessary to use 0I-recelver (not Included)
OPERATION OF THE DEVICE
- Place the wireless charger on a flat surface
- Connect the USB cable of the wireless charger to a wall charger (not supplied), The LED Indicator will turn on and change color one time.
- Place your device (for example, a smartphone with Qi receiver) at the center of the surface for wireless charging Qi-receiver In your device should be precisely at the center of wireless charger The LED indicator will change color one time•
- Once your device is charged entirely, pull off it from the wireless charger
- Disconnect wirless charger from wall charger
• if charging doesn’t start, please confirm that your device supports Qi. Also be sure there are no foreign objects between your device and the wireless charger and recheck its position against the wireless charger
TECHNICAL CHARACTERISTICS AND APPEARANCE MAY BE CHANGED WITHOUT PRIOR
NOTICE
SAFETY INFORMATION
- Before use be sure that the voltage of the wall charger is 5V or 9V (for the fast mode)
- In case of breaking do not try to open and repair the device by yourself. Use service center.
- Avoid the influence of the high humidity, dust, and dirt Use a dry soft lint-free cloth to clean the device. Not allowed to use washing or deaning liquids
- Do not store, use devices near heat sources and flammable objects, during low or high ambient temperatures. Charing can be done only under adult supervision. Recommended temperature Is 5 to 35 •c.
- Never pull the cord to disconnect the cable, pull the plug
- Not allowed to drop or hit device
- Disconnect the wireless charger from the wall charger after use
- Do not Insert foreign objects Into the device ports
- Do not cover the working device with cloth or other material
- Do not try to charge your device by the wireless charger, if your device doesn’t support Qi protocol
- Magnetic fields from the wireless charger can damage bank cards. To avoid damage do not keep your bank card near a working wireless charger
- If you are using an external Qi-receiver (an adapter that allows charging a non-QI device with a wireless charger), please connect It to your device at first. Do not place non-connected Qi-receiver onto the wireless charger
- Take a break from using if the wireless charge overheats
- The wireless charge can affect wireless networks with the low-level signals.
- Do not place on the working wireless charger device with a connected USS cable. Disconnect all cables from your device before charging it by the wireless charger
- Note that in case there is a thick case on a device, wireless charging may not work
STORAGE CONDITIONS
Keep the device in a dry well-ventilated place away from heaters, direct sunlight and out of reach of children. Do not bite or lick device, as it may cause damage or explode the device. Children or persons with disabilities should not use the device without the supervision of the responsible person
Do not dispose of household waste! It rs required to dispose this electrical device at the designated recycling collection point for electrical devices. It ensures that device Is recycled properly and prevents the release of harmful substances Into the environment.