HEPRO 35320 Top Plate Slanting Roof Instruction Manual
- June 12, 2024
- HEPRO
Table of Contents
HEPRO 35320 Top Plate Slanting Roof
Product Information
- Product Name: Gripo
- Article Number: 35320
- Date: 28.02.2023
- Manufacturer Website: hepro.no
- Language: English
Product Usage Instructions
- Unpack the received parts and ensure that nothing is missing.
- The package should include:
- A ceiling plate for angular adjustment (A 1)
- Gripo pole components (not specified)
- Mounting the Gripo pole:
- Attach the Gripo pole between the top plate (ceiling plate) and the floor according to the assembly instructions for Gripo.
- Use a spirit level to ensure that the plate is horizontal.
- Tighten the turn knobs on each side of the ceiling plate to lock it in the correct position.
- Fastening the ceiling plate to a slanting roof:
- Pre-drill holes in the ceiling through the holes in the ceiling plate (marked witharrows).
- Use 4 screws (not provided) to secure the ceiling plate to the slanting roof.
- The choice of screw quality and length should depend on the type of roof.
- Ensure that the Gripo pole is securely fastened between the floor and the ceiling plate for slanting roofs.
Note: For detailed assembly instructions, refer to the specific assembly instructions for Gripo. Please refer to the original user manual for additional information and safety guidelines.
Unwrap the received parts and make sure nothing is missing.
Installation Instructions
It should consist of
- A 1 One ceiling plate for angular adjustment
- The ceiling plate must be installed so that the round groove turns at a right angle at the top of he Gripo pole.
- When the ceiling plate is at level (horizontal), tighten the turn knobs, one on each side, so that the ceiling plate is locked in the correct posision.
- Feel free to use a spirit level to ensure that the plate is horizontal
- By predrilling holes in the ceiling through the holes in the ceiling plate (marked with arrows), shall the ceiling plate be fastened to the slanting roof with 4 screws.
- NB: The 4 screws are not provided, since the choice of quality and length of the screws will depend on the type of roof.
- The Gripo pole is then extended between the ceiling plate and the floor according to the assembly instructions for Gripo.
Warning: Make sure the pole is fastened well between the floor and the ceiling plate for slanting roofs.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>