rombica BT-S121 mysound Clario Bluetooth Speaker User Manual
- June 4, 2024
- rombica
Table of Contents
rombica BT-S121 mysound Clario Bluetooth Speaker
Thank you for purchasing Rombica device. Please read this user manual before the operation and save it for the future.
GENERAL INFORMATION
-
Power/TWS button
Short press power on
Double short press- activate TS mode
Long presS power off -
Back/Volume- button
- Short pres – decreasing volume
- Long press -play previous song
-
Play/Pause/Call button
- Short – presS
- play/pause
- Short press during incoming call-receive/cancel incoming call (Bluetooth mode)
- Long presS cancel Current Bluetooth connection
-
Forward/Volume+ button
Short press – increasing volume
Long press – play next song
Micro-USB port for charging built-in battery -
microSD slo
SPECIFICATION
- Power: DC 5V, from battery
- Bluetooth version: v5.0
- Frequency range: 115 Hz-20 kHz
- Speaker power: 15 W
- Speaker diameter: 66 mm
- Passive radiator: built-in, 1 pcs
- Battery: 1800 MAh
- Storage media devices support: microSD up to 64 GB (MP3, WAV audio files)
- Interfaces: microSD slot, micro-USB, BT, mic In the box: speaker, USB cable, manual
TECHNICAL CHARACTERISTICS AND APPEARANCE MAY BE CHANGED WITHOUT PRIOR NOTICE
OPERATION OF THE DEVICE
POWER ON
Press and hold Power button (1). Sound notification will confirm power on.
POWER OFF
Press and hold Power button (1). Sound notification will confirm power off.
PAIRING VIA BLUETOOTH
- Turn on the speaker. Make sure that the speaker is in Bluetooth mode
- Open Bluetooth settings on your smartphone/PC, enable Bluetooth and search for new devices. When Bluetooth speaker will be found, confirm pairing.
- After successful pairing both the Bluetooth speaker and your device, you can control playback by Bluetooth speaker buttons.
TRUE WIRELESS STERE0 MODE
When you have two Rombica Mysound Clario speakers you can use them together with True Wireless Stereo mode.
- Turn on both of Rombica Mysound Clario speakers
- Make sure that both devices are in Bluetooth mode
- Double short press Power button on any of speakers to pair two speakers with each other. Sound notification will confirm TWS pairing
- Pair speakers with your device same way as described in paragraph “Pairing via Bluetooth”.
PHONE CALLS
You could receive incoming calls with Bluetooth speaker if it paired to
Smartphone/tablet PC. You can talk using built-in mic and dynami. Short press
Play/Pause/Call button to receive the incoming call. Press button again to end
the call.
MICROSD AUDIO PLAYBACK
Insert microSD card into slot (6). Bluetooth speaker will automatically switch
to microSD Audio Playback mode. If microSD card is inserted already, you Could
use Mode button to select mode “microSD card audio playback”. Use Bluetooth
speaker buttons to control music playback.
BATTERY CHARGING
Before use, fully charge Bluetooth speaker within 3 hours. New battery
requires 2-3 full charge-discharge cycles to reach full capacity. Use
(supplied) cable and Connect it to the Bluetooth speaker by Micro-USB side.
Connect USB cable to the PC or wall charger (wall charger is not supplied).
SAFETY INFORMATION
-
Before charging be sure that voltage of the power is 5V.
The recommended adapter is 5V/ 1A. -
lf device is not used during long time, charge it at least once per month.
-
In cause of breaking do not try to open and repair device by yourself. Use service center
-
Avoid influence of the high humidity, dust and dirt. Use dry soft lint-free cloth to clean device. Not allowed to use washing or cleaning liquids.
-
Do not store, use or charge device near heat sources and flammable objects, during low or high ambient temperature. Charging can be done only under adult supervision. Recommended temperature is 5 to 35 °C.
-
Not allowed to drop or hit device.
-
Do not insert foreign objects to the device interfaces.
-
Turn off device after use.
-
Never pull the cord to disconnect cable, pull the plug.
-
Bluetooth speaker is not intended for the commercial use.
-
Standard battery life is 500 charge-discharge cycles. After exceeding 500 cycles the effective capacity of the battery can be reduced. Effective capacity also depends on the ambient temperature.
-
Do not cover working device by cloth or other material.
STORAGE CONDITIONS
Keep the device in a dry, wel-ventilated place, far from heaters and direct sunlight. Keep the device out of reach of children. Do not bite or lick the device, as it may cause damage or explode the device. Children or persons with disabilities should not use the device without supervision of the responsible person.
- Do not dispose with household waste! Required to dispose this electrical device at designated recycling collection point for electrical devices.
- It ensures that device is recyded professionally and prevents the release of harmful substance into the environment.
- Make sure that device is an uncharged before disposal.