rombica BH-11 Bluetooth Headphones User Manual
- June 6, 2024
- rombica
Table of Contents
mysound BH-11 Green
BT-H013
mysound BH-11 Black
BT-H014
mysound BH-11 Brown
BT-H018
USER MANUAL
Thank you for purchasing the Rombica device. Please read this user manual
before operation and save it for the future
BLUETOOTH HEADPHONES
GENERAL INFORMATION
-
MicroSD card slot
-
Mic
-
LED indicator
-
AUX
-
Micro-USB port
-
BackwardNol — button
Short press — playing previous song (FM mode: select previous radio station)
Long press — decreasing volume -
Pause / Play / Power button
Short press — play/pause.
Long press — power on / power off
Short double press — call back to the last caller
Short press during the incoming call — receive an incoming call (Bluetooth mode)
Long press during the incoming call — reject the incoming call (Bluetooth mode) -
ForwardNol + button
Short press —playing next song (FM mode: select next radio station)
Long press — increasing volume
Long press ForwardNol + and BackNol — buttons together — change working mode. You can hear different sound notifications for each mode:
• Bluetooth — single “beep” sound
• microSD audio playback — double “beep” sound
• FM Radio mode — triple “beep” sound
SPECIFICATION
Power: | DC 5V, from battery |
---|---|
Bluetooth version: | v5.0 |
Frequency range: | 20 Hz – 20 kHz |
Driver power: | 30 mW |
Driver diameter:
| 40 mm
Sensitivity:| 66 dB ± 3 dB
Impedance:| 32 Ohm
Battery:| 200 mAh / 3.7V
Storage media devices support:| microSD up to 32 GB (MP3, WAV audio files)
Interfaces:| micro-USB, microSD card slot, AUX, BT, FM, mic
In the box:| headphones, USB cable, AUX cable, manual
OPERATION OF THE DEVICE
POWER ON
Press and hold the Pause / Play / Power button. Sound notification and
turned-on LED indicator will confirm power on
POWER OFF
Press and hold the Pause / Play / Power button. Sound notification and
turned-off LED indicator will confirm power off
TECHNICAL CHARACTERISTICS AND APPEARANCE MAY BE CHANGED WITHOUT PRIOR NOTICE
PARING VIA BLUETOOTH
- Make sure that the AUX cable is not connected to the device. Turn on headphones
- Make sure that the device is in Bluetooth mode
- Open Bluetooth setting on your smartphone, enable Bluetooth and search for new When Bluetooth headphones found, confirm pairing
- After successful pairing both the Bluetooth headphones and your device, you can control playback by Bluetooth headphones buttons
PHONE CALLS
You could receive incoming calls with Bluetooth headphones if they are paired to the smartphone. You can talk using a built-in mic and drivers. Short press the Pause / Play / Power button to receive the incoming call. Press the button again to end the call. The long-press Pause / Play / Power button is rejecting the incoming call. Fast double-press Pause / Play / Power button to call the last caller
MICROSD AUDIO PLAYBACK
Insert the microSD card into the slot (1). Bluetooth headphones will automatically switch to “microSD Audio Playback” mode. Use Bluetooth headphones buttons to control music playback
AUX PLAY
Use (supplied) AUX cable and connect it to the Bluetooth headphones by one side and the external device by another side. Be sure that the cable is well connected Bluetooth mode is not available when the AUX cable is connected to the device. Playback control by buttons on the headphones is not available when the AUX cable is connected to the device
FM RADIO
Switch the working mode to “FM Radio” mode. Press the Pause / Play / Power button to start searching available radio stations. Wait for the search to complete. To change radio stations use buttons (6) and (8)
BATTERY CHARGING
Before use, fully charge Bluetooth headphones within 8 hours. The new battery requires 2-3 full charge-discharge cycles to reach full capacity. Use (supplied) cable and connect it to the Bluetooth headphones by micro-USB side. Connect the USB cable to the PC or wall charger (wall charger is not supplied). LED indicator is red while charging and turns off when the battery is fully charged
SAFETY INFORMATION
- Before charging be sure that the voltage of the power is 5V. The recommended adapter is 5V / 500 mA
- If the device is not used for a long time, charge it at least once per month
- In case of breaking do not try to open and repair the device by yourself. Use service center
- Avoid the influence of the high humidity, dust, and dirt. Use a dry soft lint-free cloth to clean Not allowed to use washing or cleaning liquids
- Do not store, use or charge devices near heat sources and flammable objects, during low or high ambient temperatures. Charing can be done only under adult supervision. Recommended temperature is 5 to 35 °C
- Not allowed to drop or hit device
- Do not insert foreign objects into the device interfaces
- Turn off the device after use
- Never pull the cord to disconnect the cable, pull the plug
- Bluetooth headphones are not intended for the commercial use
- The standard battery life is 500 charge-discharge cycles. After exceeding 500 cycles the effective capacity of the battery can be reduced. Effective capacity also depends on the ambient temperature
- Do not cover working device by cloth or other material
STORAGE CONDITIONS
Keep the device in a dry, well-ventilated place, far from heaters and direct sunlight. Keep the device out of reach of children. Do not bite or lick the device, as it may cause damage or explode the device. Children or persons with disabilities should not use the device without the supervision of the responsible person
Do not dispose of household waste! Required to dispose of this electrical device at a designated recycling collection point for electrical devices. It ensures that the device is recycled professionally and prevents the release of harmful substances into the environment. Make sure that the device is uncharged before disposal