rombica BT-S022 Bluetooth Speaker User Manual
- June 8, 2024
- rombica
Table of Contents
rombica BT-S022 Bluetooth Speaker
BLUETOOTH SPEAKER
mysound Groove Black ID: BT-S022
mysound Groove Brown ID: BT-S038
USER MANUAL
Thank you for purchasing Rombica device. Please read this user manual
before the operation and save it for the future
GENERAL INFORMATION
-
Stereo dynamics
-
USB Type-A port for Flash Drive
-
LED-indicator #I
-
LED-indicator #2
-
AUX input
-
Treble knob
Clockwise rotation – increase treble Counterclockwise rotation – decrease treble -
Bass knob
Clockwise rotation – increase bass Counterclockwise rotation – decrease bass -
Volume knob
Clockwise rotation – increase volume Counterclockwise rotation – decrease volume -
Power switch
-
Backward button
Press – play previous song (USB/Bluetooth mode) -
Play/pause/mode button
Short press – play/pause (USB/Bluetooth mode) Long press – change mode -
Forward button
Short press – play next song (USB/Bluetooth mode) Long press – refresh the Bluetooth connection -
Bass port
-
Power jack
TECHNICAL CHARACTERISTICS AND APPEARANCE MAY BE CHANGED WITHOUT PRIOR NOTICE
SPECIFICATION
- Power supply: I 00-240V. 50-60Hz / 1 BV, 2.5A
- Audio channels: 2.0
- Bluetooth version: v4.2
- Speakers power: 60W (1 x 50W + 2 x 5W)
- Speakers: Midrange & bass 127 mm 50W x 1, tweeter 50 mm 5W x 2
- Passive radiator: Bass Port
- Frequency range: 60 Hz – 20 kHz
- S/N Ratio: lBOdB
- Storage media devices support: USB flash-drive up to 32 Gb (MP3, WAV, WMA, APE, FLAC) Interfaces: DC-IN, USB Type-A, AUX, Bluetooth
- In the box: speaker, AC adapter with power cord, AUX cable, manual
OPERATION OF THE DEVICE
POWER ON
Switch the Power switch (9) to ‘On’ position. Turned-on LED indicator#l will
conn rm power on
POWER OFF
Switch the Power switch (9) to ‘Off’ position. Turned-off LED indicator#! will
confirm power off
PARING VIA BLUETOOTH
- Disconnect USB flash drive if connected. Turn on the speaker. The speaker will automatically switch to Bluetooth mode
- Open Bluetooth settings on your smartphone/PC, enable Bluetooth and search for new devices. When Bluetooth speaker will be found, confirm paring
- After successful pairing both the Bluetooth speaker and your device, you can control playback by Bluetooth speaker buttons
AUX PLAY
Use (supplied) AUX cable and connect it to the Bluetooth speaker by one side
(AUX port) and the external device by another side. Be sure that cable is well
connected. Long press Play/Pause/mode button to switch the Bluetooth speaker
into AUX mode
USB FLASH DRIVE AUDIO PLAYBACK
Insert USB Flash drive into the port USB Type-A (2). Bluetooth speaker will
automatically switch to USB Flash drive audio playback mode. Use Bluetooth
speaker buttons to control music playback
SOUND CONTROL
You can control Treble and Bass. Turn knob (6) and (7) clockwise to increase
Treble/Bass and counterclockwise to decrease Treble/Bass
POWER SUPPLY
To start using device, connect AC adapter with power cord (both supplied).
after that connect AC adapter to the Bluetooth speaker by one side (power
jack) and the wall socket by another side. Be sure that cable is well
connected.
STORAGE CONDITIONS
Keep the device in a dry, well-ventilated place, far from heaters and direct
sunlight. Keep the device out of reach of children. Do not bite or lick the
device, as it may cause damage or explode the device. Children or persons with
disabilities should not use the device without supervision of the responsible
person
SAFETY INFORMATION
- It’s highly recommended to use supplied AC adapter and power cord. Be sure that the wall socket is 100-240V before connecting the power cord.
- In cause of breaking do not try to open and repair device by yourself. Use service center
- Avoid influence of the high humidity, dust and dirt. Use dry soft lint-free cloth to clean device. Not allowed to use washing or cleaning liquids
- Do not store or use device near heat sources and flammable objects, during low or high ambient temperature. Recommended temperature is 5 to 35 °C
- Not allowed to drop or hit device
- Do not insert foreign objects to the device interfaces
- Turn off device after use
- Never pull the cord to disconnect cable, pull the plug
- Bluetooth speaker is not intended for the commercial use
- Do not cover working device by cloth or other material
- Do not try to connect your personal device (for example, smartphone) to the Bluetooth speaker to the USB-port with cable. This may cause damage of your personal device or Bluetooth speaker
Do not dispose with household waste! Required to dispose this electrical device at designated recycling collection point for electrical devices. It ensures that device is recycled professionally and prevents the release of the harmful substance Into the environment. Make sure that device Is uncharged before dlsposal