Cavor A8S Smart Magnetic Wireless Charger User Manual
- June 6, 2024
- Cavor
Table of Contents
Cavor A8S Smart Magnetic Wireless Charger
Thank you for choosing our digital products. This product is a smart magnetic
wireless charger that allows you to easily experience the fun of magnetic
alignment wireless charging. Please read the instruction carefully before
using this product
and save it for future use.
Product List
- Magnetic charger 1
- Product instruction 1
Product parameter
- Input voltage: (compatible with QC/AFC/PD protocol) 6V/2A-9V/2A
- Output power: (automatic mobile phone adaptation): 6W-7.6W-10W
- Output current: 1A-1.1 A
- Output voltage: 5-9V
- 7 .SW maximum efficiency: 76%
- Charging distance:4mm
- Charging method: magnetic alignment, electromagnetic induction
- Working frequency: 110 .1-205KHZ
- Product weight: 63g
Precautions
- Please use a qualified PD protocol or QC protocol power charger, otherwise it may cause unstable charging or abnormal flicker;
- If you need to use a protective case for your iPhone during the charging, please use one with Mag safe;
- Do not use a mobile phone protective shell with metal back or a mobile phone protective shell with a thickness greater than 4mm;
- The receiving coil of a mobile phone that supports wireless charging is generally located at the center of the mobile phone. Please place the center of the mobile phone at the center of the charging board to get a better charging experience;
- Do not put metal debris or magnetic cards on the charging board, which may cause metal hair, magnetic card damage, charger damage or other abnormalities;
- If the receiving coil or the transmitting board is overheated and the charging stops during the use, please remove the charging device, wait for it to cool down, and try charging again
Safety notice
- Do not pull the power cord violently to avoid the power cord from breaking or falling off.
- Do not disassemble ASS by yourself or throw it into fire or water to avoid short circuit and electric leakage. Do not use ASS in severe high temperature, humidity or corrosive environment to avoid leakage of electricity due to damage to the circuit.
Thank you for purchasing our ABS wireless charger. In order to ensure you get reliable after-sales service, please read the following warranty instructions carefully. Warranty scope: This product fails to work normally ormalfunctions during normal use, and it can get our after-salesservice commitment after being confirmed by our company. The following conditions are not covered by the warranty.
- The accessories are not guaranteed;
- Failure due to improper operation by the user;
- Failure caused by accidental disasters, man-made damage, self-demolition or removal of seals, and repairs by unauthorized maintenance centers of our repair center
Note: If the mobile device is damaged or even causes dangerous due to improper operation of the user
The product is out of warranty:
The customer still enjoys the maintenance service, but must pay the
maintenance cost and material cost.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a resident tial installation. This equipment generates uses
and tial installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:5
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>