rombica PL-A002 LED Lamp User Manual
- June 8, 2024
- rombica
Table of Contents
LED Oko
PL- A002LED lamp User manual
PL-A002 LED Lamp
Thank you for purchasing Rombica device. Please read this user manual before the operation and save it for the future The customer is responsible for any injury or prop-erty damage caused by non-compliance with safe-ty instruction
GENERAL INFORMATION
- Touch button
- DC input
- LED indicator
- Telescopic tube
SPECIFICATION
Input: 5V / 0.5A Type of built-in battery: Li-ion Battery capacity: 1200 mAh / 4.44 Wh LED power’: up to 2.5 W Working time: up to 24 hours Light flow: up to 150 Lm Color temperature: 3000K LEDs lifetime: ) 30 000 hours Color rendering index: a85 Ra Sizes: 142 x 115 x 156 mm
- Brightness may decrease during operation as battery discharges. Maximum brightness achieved when the battery is fully charged
POWER ON / OFF
Touch the touch button to power on. You can switch the brightness level of LED
lamp. Touch the touch button to switch the brightness level (min – mid – max –
power off)
STORAGE CONDITIONS
Keep the device in a dry, well-ventilated place, far from heaters and direct sunlight. Keep the device out of reach of children. Do not bite or lick device, as it may cause damage the device. Children or persons with disabilities should not use the device without the supervision of the responsible person
HOW TO CHARGE
- Turn off the LED lamp
- Plug your LED Lamp into PC’s USB port or a wall charger (not supplied( with USB cable (supplied)
- LED indicator is blue while charging. When LED indicator turns off – charging is complete
HOW TO USE
LED lamp has foldable construction. You can open the LED lamp’s case and stretch the tel-escopic tube. If you want to close the case, stretch back the telescopic tube and close the case
Rotate the top part or Ltu lamp counter-clockwise to open the case and clock- wise to close it.
Stretch the telescopic tube which is inside the case
To close the case you should match two parts of the closing mechanism
LAMP POSITION OPTIONS
SAFETY INFORMATION
- Before charging be sure that voltage of the power is 5V. The recommended adapter is 5V/ 500 mA
- If device is not used for a long time, charge it at least once per month
- Before charging the device be sure that you use USB – DC cable. Using an incompatible cable can damage the device
- Do not store, use or charge device near heat sources and flammable objects, during low or high ambient temperature. Charing can be done only under adult supervision. Recommended temperature is 5 to 35 °C
- Do not expose the device to strong impacts or mechanical shock. Do not attempt to disassemble, repair or modify device by yourself. Any changes in construction entail the termination of the warranty. Contact service center if device needs the repair
- The device should be protected from damp, rain, dust and dirt. Do not allow water to enter the device, do not put the device in water
- Not allowed to prolonged exposure of direct sunlight on the device
- Keep the device out of the reach of children. Do not bite or lick the device, as this may damage or explode the device. This device should not be used by young children or persons with disabilities without supervision of the responsible person providing safe use. Watch out for small children so they do not play with the device
- Do not insert foreign objects into device interfaces
- Use dry soft lint-free cloth to clean device. Not allowed to use washing or cleaning liquids
- The device is not intended for the commercial use
- Do not cover working device by cloth or other material
IN THE BOX:
- Portable LED Lamp
- USB-DC cable
- Manual
TECHNICAL CHARACTERISTICS AND APPEARANCE MAY BE CHANGED WITHOUT PRIOR
NOTICE
Do not dispose with household waste! Required to dispose this electrical
device at designated recycling collection point for electrical devices. it
ensures that device is recycled professionally and prevents the release of the
harmful substance into the environment. Make sure that device is uncharged
before disposal