rombica NEO Q26 WIRELESS CHARGER User Manual
- June 5, 2024
- rombica
Table of Contents
rombica NEO Q26 WIRELESS CHARGER
OVERVIEW
- Surface for wireless charging
- LED indicator
- USB type-C input
SPECIFICATION
- INPUT: USB Type-C 5V/2A; 9V/2A
- OUTPUT: 5n.5/1M5W
- IN THE BOX: wireless charger, USB cable, user manual
- Fast charge. Supports up to 15W wireless charging
It is necessary to use Quick Charge 2.0/3.0 wall charger (not included) to charge in fast mode (10 and 15W) Wireless charging distance: up to 5 mm. Works with Qi-compatible devices If your device is not Qi-compatible, it is necessary to use Qi-receiver (not included)
OPERATION OF THE DEVICE
-
Place the wireless charger on a flat surface
-
Use (supplied) USB cable and connect the wireless charger to a wall charger (not supplied). The LED indicator will turn on and flash 3 times
-
Place your device (for example, smartphone with Qi receiver) at the center of the surface for wireless charging (1) Qi-receiver in your device should be precisely at the center of wireless charger
The LED indicator will work continuosly” -
Once your device is charged entirely, take it from the wireless charger
-
Disconnect wireless charger from wall charger
if LED doesn’t work continuosly, given it flashed 3 times successfully, please check that your device supports Qi. Also be sure there are no foreign objects between your device and the wireless charger and recheck position of it
SAFETY INFORMATION
- Before use be sure that voltage of wall charger is 5V or 9V (for the fast mode)
- In case of breaking do not try to open and repair device by yourself. Use service center
- Avoid the influence of the high humidity, dust, and dirt. Use a dry soft llnt-free cloth to clean device. Not allowed to use washing or cleaning liquids
- Do not store, use device near heat sources and flammable objects, during low or high ambient temperature. Charing can be done only under adult supervision. Recommended temperature is 5 to 35 “C.
- Never pull the cord to disconnect the cable, pull the plug
- Not allowed to drop or hit device
- Disconnect the wireless charger from the wall charger after use
- Do not insert foreign objects into the device ports
- Do not cover working device with cloth or other material
- Do not try to charge your device by the wireless charger, if your device doesn’t support Qi protocol
- Magnetic fields from the wireless charger can damage bank cards. To avoid damage do not keep your bank card near working wireless charger
- lf you are using external Qi-receiver (adapter that allows to charge a non-Qi device with wireless charger), please connect it to your device at first. Do not place non connected Qi-receiver onto wireless charger
- Take a break from using if the wireless charge overheats
- The wireless charge can affect wireless networks with low-level signal
- Do not place on the working wireless charger device with connected USB cable. Disconnect all cables from your device before charging it by the wireless charger
- Note that in case there is a thick case on a device, wireless charging may not work
STORAGE CONDITIONS
Keep device in a dry well ventilated place away from heaters, direct sunlight and out of reach of children. Do not bite or lick device, as it may cause damage or explode the device. Children or persons with disabilities should not use the device without the supervision of the responsible person Do not dispose with household waste! It is required to dispose this electrical device at designated recycling collection point for electrical devices. It ensures that device is recycled properly and prevents the release of the harmful substance into the environment