rombica NQ-00200 Series Wireless Charger User Manual
- June 8, 2024
- rombica
Table of Contents
rombica NQ-00200 Series Wireless Charger User Manual
GENERAL INFORMATION
-
INPUT: USB Type-C 5V/2A; 9V/1.674
-
OUTPUT: 5W; 7.5W; 10W IN THE BOX: USB cable, user manual
Fast charge. Support: 7.5W and 1OW* -
Wireless charging distances: up to 5 mm. Compatible with Q1-devices
-
use Quick Charge 20/3.0 wall charger (not included) for the fast mode (7.5W or 10W)
This wireless charging pad produced according to Qi standard. Please use it with Qi-friendly smartphones. If your phone is not Qi-compatible, you should use Qi-receiver (not included)
OPERATION OF THE DEVICE
- Place the wireless charger on a flat surface.
- Plug a wall charger (not supplied) with USB cable (supplied) into the wireless charger. The LED indicator will turn on.
- Place your device (for example, smartphone with Q1-receiver) at the center of the surface for wireless charging. Qi-receiver in your device should be precisely at the center of wireless charger. If you place the device correctly LED indicator will change brightness from min to max level for a while *
- Once your device is charged entirely, pull it off from wireless charger.
- Disconnect wireless charger from wall charger
- if LED didn’t turn on or blinking, please check that your device support Oi. Also be sure there are no foreign objects between your device and the wireless charger and recheck position of it.
STORAGE CONDITIONS
Keep the device in a dry, well-ventilated place, far from heaters and direct sunlight. Keep the device out of reach of children. Do not bite or lick device, as it may cause damage or explode the device. Children or persons with disabilities should not use the device without the supervision of responsible person
Do not dispose with household waste! Required to dispose this electrical device at designated recycling collection point for electrical devices. It ensures that device is recycled professionally and prevents the release of the harmful substance into the environment. Make sure that device is uncharged before disposal.
SAFETY INFORMATION
- Before use be sure that voltage of wall charger is 5V or 9V (for the fast mode).
- In case of breaking do not try to open and repair device by yourself. Use service center.
- Avoid influence of the high humidity, dust and dirt. Use a dry soft lint-free cloth to clean the device. Not allowed to use washing or cleaning liquids.
- Do not store, use device near heat sources and flammable objects, during low or high ambient temperature. Charging can be done only under adult supervision. Recommended temperature is 5 to 35 °C.
- Never pull the cord to disconnect the cable, pull the plug.
- Not allowed to drop or hit device.
- Disconnect the wireless charger from the wall charger after use.
- Do not insert foreign objects into the device surfaces.
- Do not cover working device with cloth or other material.
- Do not try to charge your device with the wireless charger, if your device doesn’t support Qi protocol.
- Magnetic fields from the wireless charger can damage bankcards. To avoid damage do not keep your bankcard near working wireless charger.
- If you are using external Qi-receiver (adapter allowed to charge a non-Qi device with wireless charger), please connect it to your device at first. Do not place Qi-receiver on the working wireless charger separately from your device.
- Take a break from using if the wireless charger overheats.
- The wireless charge can affect wireless networks with low-level signal.
- Do not place device with connected USB cable on the working wireless charger. Disconnect all cables from your device before charging it with the wireless charger.
- If your device covered by thick case, wireless charge may not work.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>