rombica NEO Pro Saturn Black Smartphone User Manual

rombica NEO Pro Saturn Black Smartphone SAFETY INFORMATION

1. Carefully read this manual before use.
2. In case of breaking do not try to open and repair device by yourself. Visit service center.
3. Avoid exposure to high humidity, dust and dirt. Use dry soft lint-free cloth to clean the power bank. It is not allowed to use washing or cleaning liquids to clean power bank.
4. Do not store or use the power bank near heat sources and flammable objects, in low or high ambient temperatures. Charing can be done only under adult supervision.
5. Recommended temperature range is 5 to 35 °C.
6. Never pull the cord to disconnect the cable, pull the plug.
7. It is not allowed to drop or hit the power bank.
8. Disconnect all external devices from the power bank after use.
9. Do not insert foreign objects into the power bank’s interfaces.
10. Do not cover working power bank with cloth or other material.
11. Fully charge power bank within 20 hours before first use.
12. Before charging power bank ensure that you use wall charger with correct voltage.
13. Before charging laptop ensure that you select proper voltage mode.

GENERAL INFORMATION

1. Power button.
2. DC OUT, output to charge laptop and other compatible devices.
3. USB1 OUT: Quick Charge 3.0 support.
4. USB2 OUT: Quick Charge 3.0 Support.
5. Type-C: Power Delivery 3.0 support.
6. LED display.
7. DC IN, input to charge device.

SPECIFICATION

• MODEL: NEO PRO Saturn Rlack/NEO PRO Saturn Red
• BATTERY TYPE: Li-Po
• BATTERY CAPACITY:55 000 mAh /203.5 Wh
• INPUTS:DC IN: 20V/2A Type-C IN: 20V/3A (Power Delivery)
• OUTPUTS :DC OUT: 12V/3.5A, 16V/3.5A, 19V/3.5A, 21V/4.67A Type-C OUT: 5V/3A; 9V/2A, 12V/3A, 15V/3A, 20V/5A (Power Delivery) USB1 OUT: 5V/3A, 9V/2A, 12V/1.5A (Quick Charge 3.0) USB2 OUT: 5V/3A, 9V/2A, 12V/1.5A (Quick Charge 3.0)
• QUICK CHARGE VERSION 3.0
• USB POWER DELIVERY REVISION 3.0 (Type-C port)
• DIMENSION 154x 257 x 29 mm
• WEIGHT 1130 + 80g

IN THE BOX

HOW TO CHARGE POWER BANK VIA DC INPUT

1. Unplug all connected devices from the power bank.
2. Connect supplied wall charger to the power bank DC IN port ( and after that to an electric socket.
3. You can check the capacity and the LED display, Once you see 100 on the LED display-charging is completed.
4. Disconnect the wall charger from the power bank.

HOW TO CHARGE POWER BANK VIA TYPE-C INPUT

1. Unplug all connected devices from the power bank.
2. Connect wall charger with Type-C PD (20V, 4th or 5th profile) support (not supplied) via Type-C cable to the power bank and after that to an electric socket.
3. You can check the capacity on the LED display. Once you see 100 on the LED display – charging is completed.
4. Disconnect wall charger from the power bank.

POWER ON/OFF OF THE POWER BANK

To turn on power bank press shortly the power button

LED display will turn on showing remaining capacity. Power Bank will turn off automaticaly without load.

CHARING EXTERNAL DEVICES VIA USB PORT

1. Turn on the power bank.
2. Connect the external device to the USB port of the power bank (3, 4)
3. Disconnect the external device from the power bank once charging is completed.

CHARGING EXTERNAL DEVICES VIA TYPE-C PORT

1. Turn on the power bank.
2. Connect the external device to the Type-C port of the power bank
3. Maximum output of the Type-C port is 100 W Power Delivery).
4. If your device, for example, a laptop requires a charger with higher power output-do not charge it with the power bank.
5. It can lead to the power bank overheating.
6. Disconnect the external device from the power bank once charging is completed.

CHARGING LAPTOPS AND COMPATIBLE DEVICES VIA DC OUT PORT

1. Unplug all cables from USB and Type-C ports. 2. If you are going to charge Apple MacBook with MagSafe 1 or MagSafe 2, then connect cable34)or35to the DC OUT port.
2. If you are going to charge laptops or other devices compatible with the supplied adapters and the required voltage is supported by the power bank- then connect cable(5)to the DC OUT port (2).
3. Turn on power bank.
4. Long press of the power button will switch power bank to the DC OUT mode.
5. LED display will show voltage of the DC OUT port After that short press of the power button will select voltage – 12V, 16V, 19V and 21V.
6. Connect cable(5)with installed compatible adapter(633/ MagSafe cable to the laptop input port.
7. Disconnect laptop from the power bank once charging is completed. Long press the power button to leave DC OUT mode.
   NOTE: If you enter DC OUT mode, but not going to use DC OUT port, then press and hold power button again to exit DC OT mode. It is not allowed to connect any device to USB and Type-C ports of the power bank while DC OUT mode is active.

Notes:

• If the input voltage of your laptop is equal to 16.5V, then you can use”16V mode only when the remaining capacity of the laptop battery is at least 20%.
• if the input voltage on your laptop is equal to 19.5V, then you can use “19V mode only when the remaining capacity of the laptop Battery IS at least 20%.
• Any other voltage difference between power bank output and laptop input is forbidden.
• Do not connect a laptop to the power bank before the right voltage is chosen.
• Max power of the DC OUT port is 98W. If the original wall charger of your laptop is more powerful, you can charge your laptop only if one of two conditions are satisfied.
• The laptop IS turned on.
• The laptop is turned on, but “battery saver” mode is enabled, the discrete graphics card is disabled (if available) and Screen brightness is reduced.

QUICK CHARGE AND POWER DELIVERY

USB ports (4, 5) support Ouick Charge 3.0. After connecting OC 3.0 compatible device, USB port will activate fast charge mode automatically. Type-C port supports Power Delivery protocol. After connecting PD compatible device, Type-C port will activate fast charge mode automatically.

REMAINING CAPACITY

Turn on power bank to check remaining battery capacity. While power bank is turned on – LED display shows remaining capacity.

STORAGE CONDITIONS

Keep the power bank in a dry, well-ventilated place, away from heaters and direct sunlight. Keep the power bank Out of the reach of children. Do not bite or lick the power bank, as it may cause damage to the power bank. Children or persons with disabilities should not use the power bank without the Supervision of the responsible person.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>