WISILICA Radiar AR10 Bluetooth 5.2 Controllable Dual Channel 0-10V Room Controller User Manual
- June 9, 2024
- WISILICA
Table of Contents
Radar AR10 Bluetooth 5.2 Controllable Dual Channel 0-10V Room Controller
User Manual
Radar AR10
Radar AR10 Bluetooth 5.2 Controllable Dual Channel 0-10V Room Controller
Radar AR10 is a BLE5.2 controllable, dual-channel 0-10V room controller. The
device is powered by 277VAC voltage, also has a 20A relay to use it as a room
controller or as a plug-load controller. It comes with Class-1 and Class-2
dual channel 0-10V dimming outputs, 0-10V sensor input, and 12V auxiliary
output. The high output ratings within the device makes it suitable to
control multiple numbers of light fixtures within a room. The device comes
with 150mm external wire antenna for communication.
The Lumos Controls ecosystem comprises controllers, sensors, switches,
modules, drivers, gateways, and analytical dashboards, and can be connected to
the Lumos Controls cloud for data analytics and configuration management. The
lighting network’s configuration, commissioning, and controlling can be done
super-quick from any mobile device. The ecosystem is listed by the Design
Lights Consortium (DLC), qualifying it for energy conservation incentive
programs and rebates utility companies in North America.
Features
- Dual channel 0-10V independent output to control intensity and color temperature (CCT).
- Load control up to 20A @ 120/277VAC.
- Auxiliary 12V/100mA output to power the sensors.
- 0-10 VDC input channel to integrate with third party sensors.
- Class-1 and Class-2 dual channel 0-10V outputs to control the dimming and CCT.
- It acts as a Plug load controller to manage, control and monitor the plug loads efficiently.
- Instantaneous current and voltage measurement of connected load.
- BLE5.2 based non-flooding intelligent communication.
- Standard ½ inch chase nipple allows easy mounting to a junction box.
- Zero downtime Over-the-Air (OTA) firmware updates.
Specifications
Electrical | Value | Remarks |
---|---|---|
Input Voltage | 120 – 277 VAC | |
Input Current | 40 Ma @230 | 75 Ma @ 110v |
Frequency | 50 – 60 Hz | |
Load Voltage | 90-277 V | |
Load Current | 20A | |
Max LOAD output wattage | 5 KW | |
Inrush current | 4A | |
Surge protection | 4 kV | |
Standby current | 14 Ma @ 110v | 12 Ma @ 230 V |
0-10V Output | Value | Remarks |
--- | --- | --- |
Number of channels | 2 | |
Voltage range | 0-10VDC | Tolerance: ±0.2V |
Current | 100mA | Source current per channel |
Dimming Range | 0-100% | 1000 steps resolution |
Dimming curve | linear (default) /logarithmic | |
Sensor Input | Value | Remarks |
--- | --- | --- |
Voltage Range | 0-10VDC Analog input | |
Auxiliary Output | Value | Remarks |
--- | --- | --- |
Voltage | 12VDC | |
Current | 100mA | |
Bluetooth | Value | Remarks |
--- | --- | --- |
Frequency | 2402-2480 MHz | |
Max output power | 8 dBm | |
Receive sensitivity | -95 dBm | |
Connection distance (device to device) | 45m (146 ft) | vary depending on the |
installation environment
Environmental| Value| Remarks
---|---|---
Operating temperature (in °C, °F)| -20 – 50 ºC|
Case temperature (in °C, °F)| 70 ºC|
Relative humidity (in °C, °F)| 20 – 85 %|
Mechanical| Value| Remarks
---|---|---
Dimensions| 109.5 x 96.5 x 28 mm| L x W x H
Dimensions| 4.3 x 3.8 x 1.10 inch| L x W x H
Weight (in gm, oz)| 160 gm (2.11 oz)|
Case material| ABS Plastic (Blue color)|
Flammability rating| UL 94 5VA|
Dimensions
Radar AR10
Wire Description
Class-1 outputs
Pin | Name | Color | Gurage | Rating | Description |
---|---|---|---|---|---|
1 | Line | Black | 12AWG (4.0mm2) | 600V | 120-277VAC |
2 | Common Neutral | White | 12AWG (4.0mm2) | 600V | 120-277VAC |
3 | Load | Red | 14AWG (2.5 mm2) | 600V | 120-277VAC |
4 | 0-10V DIM1+ | Purple | 20AWG (0.5mm2) | 600V | 0-10VDC/100mA |
5 | 0-10V DIM2+ | Orange | 20AWG (0.5mm2) | 600V | 0-10VDC/100mA |
6 | 0-10VDIM-/GND | Pink | 20AWG (0.5mm2) | 600V | 0-10VDC/GND |
7 | 12VDC | Yellow | 20AWG (0.5mm2) | 600V | 12VDC/100mA |
8 | 0-10VDC sensor input | Blue | 20AWG (0.5mm2) | 600V | 0-10VDC/2mA |
Class-2 Outputs
Pin | Name | Push-in connector Color | Description |
---|---|---|---|
1 | 0-10V DIM1+ | Purple | 0-10VDC/100mA |
2 | 0-10V DIM2+ | Orange | 0-10VDC/100mA |
3 | 0-10VDIM-/GND | Pink | 0-10VDC/GND |
4 | 0-10VDC sensor input | Blue | 0-10VDC/2mA |
5 | 12VDC | Yellow | 12VDC/100mA |
6 | 0-10VDIM-/GND | Pink | 0-10VDC/GND |
Antenna Information
150mm wire antenna
Antenna Properties
Frequency range| 2.4 GHz-2.5GHz
Impedance| 50 Ω Nominal
VSWR| 1.92:1 Max
Return loss| -10 dB Max
Gain(peak)| 2 dB
Cable loss| 0.3 dB Max
Polarization| Linear vertical
Wiring Types
Class-1 wiring
- In Class-1 wiring, the 0-10V low voltage control wires run along with the line voltage wires in a same conduit. (See the image below)
- Class 1 installations require wire with insulation that is rated for the voltage carried (most wiring has 600V rated insulation) and must be installed in conduit or a protective cable assembly.
Class-2 wiring
- In Class-2 wiring, the 0-10V low voltage wires run separately in another conduit (See the image below)
- These circuits do not have high enough voltage or current to present a hazard to personnel and have less stringent installation requirements in regards to protection of the wiring.
- A Class 2 wiring may be installed free within the wall or ceiling without line voltage rated insulation or protection of conduit or a cable assembly.
Wiring Diagram
- Configuring Radar AR10 for dimming, tuning and an external sensor control.
- Configuring Radar AR10 for Plug Load Control
Items included in the package box
- Radar AR10
- User Manual
- Antenna
Ordering Information
Product Code| Product Description| Communication| Voltage Rating| Sensor
Input| Output Channel| Aux Power| Relay Control| Inbuilt Power
Measurement
---|---|---|---|---|---|---|---|---
WCA2CSRN| Wireless 0-10V dual channel dimming AC powered room controller
without Power measurement.| BLE5.2| 120-277V AC| 0-10 VDC| 0-10V
2 Channels| 12VDC| 20A| No
WCA2CSRN P| Wireless 0-10V dual channel dimming AC powered room
controller Measurement.| BLE5.2| 120-277V AC| 0-10 VDC| 0-10V
2 Channels| 12VDC| 20A| Yes
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance
20cm between the radiator and your body.
CONNECTING THINGS TO LIFE
WI Silica Inc
23282 Mill Creek Dr #340, Laguna Hills, CA 92653 United States of America
info@wisilica.com
www.wisilica.com
www.wisilica.com
sales@wisilica.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>