rombica NEO Bright 1C Power Bank User Manual
- June 5, 2024
- rombica
Table of Contents
rombica NEO Bright 1C Power Bank
OVERVIEW
Thank you for purchasing the Rombica device. Please read this user manual before the operation and save it for the future
- NEO Bright 1 C PB-00111
- NEO Bright 2C PB-00112
- NEO Bright 3C PB-00113
- NEO Bright 4C PB-00114
- NEO Bright SC PB-0011 S
- NEO Bright 6C PB-0011 S
GENERAL INFORMATION
- Power button
- LED indicator
- USB output N’l
- Micro-USS input
- USS output N’2
SPECIFICATION
- Battery type: Li-polymer
- Battery capacity: 10 000 mAh / 37 Wh
- Input: Micro-USS: 5V/2A
- Outputs: USBl: 5V/2A
- USB2: 5V/2A
- Dimensions: 70 x 144 x 15 mm
- Weight: 180±10 g
- In the box: Power Bank, USS Type-A – micro-USS cable, manual
OPERATION OF THE DEVICE
POWER ON
Connect your device to the Power Bank with a USS cable. It will automatically turn on*
POWER OFF
Power Bank turns off automatically without load
HOW TO CHARGE POWER BANK
Use (supplied) USS cable and connect it to the power bank’s micro-USS input by
the micro-USS side, and by another side – to the PC or wall charger
(not supplied). LED indicators blink while charging and stop blinking when the
battery is fully charged
HOW TO CHARGE EXTERNAL DEVICES
- You can use the original device’s USS cable or supplied cable for charging
- Connect the USB cable to one of the power bank’s USB outputs by one side and the personal device by another side
- Disconnect the external devices from the Power Bank after use
REMAINING CAPACITY
Turn on the power bank to check remain battery capacity. While power bank is turned on – LED indicator shows remaining capacity: deeply connected discharged) device should power load bank power will not bank. tum If it on. doesn’t Charging happened may not (for start example, automatically connected with device some is power mex:lels of bank smartphones and tablets. In this case you can press the power button
SAFETY INFORMATION
- Before nrst usefully charge power bank within 12 hours. New battery requires 2-3 dull charge-discharge cycles to reach full capacity
- Before charging power bank be sure that voltage of the power is 5V. The recommended adapter is 5V / 2000 mA
- If device is not using during long time, charge it at least once per month
- Standard battery life is 500 charge-discharge cycles. After exceeding 500 cycles, the effective capacity of the battery can be reduced. Effective capacity also depends on the ambient temperature
- Never pull the cord to disconnect cable, pull the plug
- Do not store, use device near heat sources and flammable objects, during low or high ambient temperature. Charing can be done only under adult supervision. Recommended temperature is 5 to 35 ‘C
- Not allowed to drop or hit the power bank
- In case of breaking do not try to open and repair device by yourself. Use service center
- Avoid inftuence of the high humidity, dust and dirt. Use dry soft lint-free cloth to clean charger. Not allowed to use washing or cleaning liquids
- Disconnect all external devices from the power bank after usage
- Do not insert foreign objects to the power bank interfaces
- Do not cover working power bank by cloth or other material
- Take a break from using if the power bank overheats
STORAGE CONDITIONS
Keep the Power Bank in a dry, well-ventilated place, far from heaters and direct sunlight. Keep the Power Bank out of reach of children. Do not bite or lick Power Bank, as it may cause Power Bank damage . Children or persons with disabilities should not use the power bank without the supervision of the responsible person
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>