baseus PPCXM06A Magnetic Mini Air Wireless Fast Charging Power Bank User Manual
- June 14, 2024
- Baseus
Table of Contents
baseus PPCXM06A Magnetic Mini Air Wireless Fast Charging Power Bank User
Manual
Warnings
-
This is NOT a toy! Please place this product in areas that are not easily accessible by children. Do not allow children to operate this product, or accidents may occur.
-
Please charge this product with a charger approved by the local safety standards in case of danger or damage.
-
DO NOT apply pressure, and avoid collisions. The battery and circuit may be damaged if this product falls from a great height, experiences intense shocks, or is immersed in liquid; if so, please avoid using this product.
-
If this product suffers from deformation, leakage, or radical decline in performance, please stop using this product.
-
Please DO NOT charge any device or recharge this product in places that
may affect its heat dissipation, such as pants pockets, enclosed bags, beds, or couches. And ensure this product is not under any cover when operating. When charging other devices for prolonged periods, DO NOT stack any device on top of this product, or it might affect its heat dissipation. -
This product CAN NOT be disassembled, applied pressure, pierced, short-circuited, immersed in liquid, disposed of in a fire, or exposed to a high temperature or heat source with a temperature greater than 140°F (60°C).
-
DO NOT place this product in areas with extremely high temperatures. Such as under direct sunlight or in a vehicle with a very high interior temperature.
-
This product contains lithium batteries, DO NOT disassemble it! Or danger or battery damage may occur.
-
This is not domestic waste. It should be handed over to a designated facility for electronic device recycling.
Attention
- Please fully charge this device before using it for the first time.
- The power banks have conversion efficiency, so the battery capacity of power bank is not equal to the rechargeable capacity.
- Please choose an appropriate charger for recharging this product and suitable cables when charging other devices.
- Please ensure some supervision is in progress when recharging this product, DO NOT charge this product without any care.
- Please remove the cable when done recharging this product or finished charging for any other device to preserve the product integrity.
- If the indication does not light up after pressing the power button, please recharge this product.
- Please preserve this product with a battery percentage between 25%-50% for long-term storage. Place this product in a cool and dry environment. To slow down battery aging, avoid storing this product in an empty or full charge for long term storage.
- Consumer shall be liable for any personal and property damage resulted from their improper use against the user manual or ignoring the warning, to which our company will not bear any legal liability.
Caution
- This product does not contain any user-serviceable parts, and the rechargeable battery is not replaceable.
- Putting the battery pack into fire or heating it in an oven, as well as subjecting the battery pack to mechanical squeezing or cutting, may result in explosion.
- Placing the battery pack in an extremely high-temperature environment may cause explosion or leakage of flammable liquids or gases.
- Subjecting the battery pack to extremely low air pressure may cause explosion or leakage of flammable liquids or gases.
Wireless Charging Warnings
This product utilizes magnetic and capacitive coupling mechanisms to achieve
non-beamforming near-field power transmission from the power source to the
load.
The device complies with relevant regulations such as the “Interim Provisions
on Radio Management for Wireless Charging (Power Transmission) Devices,” as
well as laws and regulations concerning product quality, electromagnetic
radiation, electrical safety, and national standards. It is not allowed to
change the usage scenarios or conditions, expand the operating frequency
range, or increase the transmission power (including adding additional power
amplifiers) without permission. It is not allowed to cause harmful
interference to other legal wireless services and stations. Users cannot
request protection against radio interference or radiation interference. If
harmful interference to other legal wireless services and stations occurs,
immediate use must be stopped, and it can only be resumed after taking
measures to eliminate the harmful interference. Wireless charging devices are
prohibited in this area. The use of wireless charging function is not allowed.
If the use of wireless charging devices is causing interference to broadcast
services, it should be immediately discontinued. The use of wireless charging
devices in ships, aircraft, and railway locomotives (including high-speed
train units) should comply with this regulation and the relevant regulations
of the industry authority.
Specifications
- Name: Power Bank
- Model No.: PPCXM06A
- Battery: Polymer Lithium Battery
- Power Capacity: 6000mAh/22.2Wh
- Energy Conversion Rate: >75%
- Type-C Input: 5V-3A; 9V-2A
- Type-C Output: 5V-2.4A; 9V-2.22A; 12V-1.5A
- Wireless Output: 5W/7.5W/10W/15W
- Total Output: 5V-2.4A
- Product Size: 98.4×63.9X16.3mm
- Product Weight: About 146.5oz
Content
Power bank X1
User manual X 1
Warranty card X1
Charging cable X1
Product Schematic Design
Description
This product is a portable charging device that can provide wired and wireless charging for mobile phones, tablets, game consoles and other digital products. The product has auto-alignment for magnetic charging, and supports Apple 20W PD fast charging, Type-C dual-way fast charging, 15W wireless fast charging, etc. It has built-in FOD, overcharge, over-discharge, temperature protection and other safety protection circuits.
Operating Environment
Working temperature: non-tropical areas, 0°C to 25 °C
Storage temperature: 0°C to 40°C
Icon Description
The 5-year icon refers to the “valid period for environment-friendly use”, not the product quality assurance period. All electronic products contain toxic and harmful substances such as lead, mercury and cadmium. The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, causing environment pollution or serious damage to people and property. The term of “environment-friendly use period” means that all electronic products shall be used within this validity period. We won’t be held liable for safety issues caused by using of the product beyond its safe service life.
Statement on Toxic and Hazardous Substances in Electronic Information
Products
| Part Description | Toxic or hazardous substances and elements |
|---|---|
| Lead(pb) | Mercury |
| (Hg) | Cadmium |
| (Cd) | Hexavalent |
| chromium(cry!) | Polybrominated |
| biphenyls(PBB) | Polybrominated |
diphenyt ethers(PBDE)
PCB| X| 0| 0| 0| 0| 0
Plastic| 0| 0| 0| 0| 0| 0
Metal| X| 0| 0| 0| 0| 0
Accessory| 0| 0| 0| 0| 0| 0
This form is compiled in accordance with SJ/T 11364.
O: Indicates that contents of the toxic and hazardous substances in all
homogeneous materials are below the limit requirements specified by GB/T
26572 standard.
X: Indicates that contents of the toxic and hazardous substances exceed the requirements specified by GB/T 26572 standard in at least one homogeneous material of the component.
Declaration of Conformity
It is hereby declared that PPCXM06A, a product model of Shenzhen Baseus Technology Co., Ltd., complies with the provisions of Directive 2014/53/EU, Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: www.baseus.com
This equipment complies with the provisions of Directive 2012/19/EU and Directive 2006/66/EC & 2013/56/EU. It is strictly forbidden to dispose of this equipment with ordinary trash. It must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.
FCC ID: 2A482-PPCXM06A
Warning
Prohibited from disassembling, impacting, squeezing, or putting in fire. If severe swelling occurs, do not continue to use. Do not place in high- temperature environment. Prohibited from use after immersion in water
Manufacturer: Shenzhen Baseus Technology Co., Ltd. Add: 2nd Floor, Building
B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian
Street, Longgang District, Shenzhen Executive Standard: GB4943.1; GB31241
Hotline: +1 800 220 8056 Website: https://www.baseus.com Official After-
sales E-mail Address: care@baseus.com
Designed by Baseus
Made in China
PB4437Z-POAO
1100006352
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>