J-TECH DIGITAL JTD-3033 4K 60Hz HDMI KVM Extender User Manual

DIGITAL JTD-3033 4K 60Hz HDMI KVM Extender
User Manual

JTD-3033 4K 60Hz HDMI KVM Extender

4K60Hz HDMI KVM Extender 70M w/ ARC, Ethernet, USB
JTD-3033 | JTECH-4KEX-AUE

Scan the QR code below or visit https://resource.jtechdigital.com/products/3033 to view and access detailed digital resources regarding this unit.

https://resource.jtechdigital.com/products/3033

Safety Instructions:

• Before using this product, please carefully read the following safety instructions to ensure its proper use and keep this manual for future reference:
• To prevent electric shock, do not attempt to open the product.
• Only qualified personnel should perform any repairs or maintenance.
• Always place the product on a stable, flat surface to prevent it from falling.
• Do not expose the product to water, moisture, or high-humidity environments to avoid the risk of damage.
• To prevent damage from direct sunlight or high temperatures, do not expose the product to such environments.
• Do no place the product near heat sources like radiators, heat registers, stove, or other heat-producing apparatus.
• Do not place any objects on top of the product to avoid damage.
• Use only the attachments and accessories specified by the manufacturer.
• During lightning storms or prolonged periods of disuse, unplug the power supply to prevent damage.

Introduction

This 18Gbps HDMI Extender can extend high definition video / audio signal, RS-232, bi-directional IR and internet signal, at the distance of up to 328ft / 100m between transmitter and receiver via a single CAT6a/7 cable and support resolution up to 4K2K@60Hz 4:4:4. The Transmitter supports ARC function and local audio extract. In addition, the extender is equipped with bi-directional IR pass-through which allows for source and display control. It also supports USB KVM and PoC function.
The extender offers the most convenient solution for HDMI extension via a single CAT cable with long distance capability, and is the perfect solution for any application.

Features

• HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
• Supports 18Gbps video bandwidth
• Video resolution is up to 4k2k@60Hz YUV 4:4:4
• The maximum transmission distance is 328ft / 100m via a single CAT6a/7 cable
• Supports ARC (Audio Return Channel) function
• With bi-directional IR, RS-232 and CEC pass-through
• Supports USB KVM function
• HDR, HDR10+, Dolby Vision and HLG function supported
• Supports PoC (Power over Cable) function
• Compact design for easy and flexible installation

Package Contents

• 1 × 18Gbps HDMI over HDBaseT Extender (Transmitter)
• 1 × 18Gbps HDMI over HDBaseT Extender (Receiver)
• 1 × IR Blaster Cable (1.5m)
• 1 × 20~60KHz IR Receiver cable (1.5m)
• 4 × Mounting Ear
• 2 × 3-pin Phoenix connector
• 1 × 24V/1A Locking Power adapter
• 1 × User Manual

Specifications

Technical

HDCP Compliant| HDCP 2.2 / 1.4
Video Bandwidth| 18Gbps
Video Resolution| 4K2K 50/60Hz 4:4:4
4K2K 50/60Hz 4:2:2
4K 2K 50/60Hz 4:2:0
4K 2K 30Hz 4:4:4
1080p, 1080i, 720p, 720i, 480p. 480i
All PC resolutions including 1920 x 1200
Color Depth| 8/10/12-bit (1080P60Hz, 4K30Hz, 4K60Hz YCbCr 4:2:2/4:2:0) 8-bit (4K60Hz 4:4:4)
Color Space| RGB / YCbCr 4:4:4, YCbCr 4:2:2. YCbCr 4:2:0
HDMI Audio Formats| LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby Digital Plus(DD+), DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X
L/R Audio Formats| PCM 2.0
SPDIF Audio Formats| LPCM2.0, Dolby Digital, Dolby Digital Plus, DTS
ESD Protection| Human body model—±8kV (Air-gap discharge) & ±4kV (Contact discharge)
|
Connection
Transmitter| Inputs: 1 × HDMI Type A [19-pin female] Outputs: 1 × HDBT OUT [RJ45, 8-pin female] 1 × SPDIF OUT [S/PDIF] 1 × L/R OUT [3.5mm Stereo Mini- jack] 1 × LAN [RJ45] Control: 1 × IR IN [3.5mm Stereo Mini-jack] 1 × IR OUT [3.5mm Stereo Mini-jack] 1 × RS-232 [Phoenix jack] 1 × SERVICE [Mini-USB, Update port] 1 × USB HOST [USB Type B ]
Receiver| Inputs:    1 × HDBT IN [RJ45, 8-pin female] 1 × SPDIF IN [S/PDIF] Outputs: 1 × HDMI Type A [19-pin female] 1 × LAN [RJ45] Control: 1 × IR IN [3.5mm Stereo Mini-jack] 1 × IR OUT [3.5mm Stereo Mini-jack] 1 × RS-232 [Phoenix jack] 1  × SERVICE [Mini-USB, Update port] 2  × USB 2.0 [USB Type A]
---|---
Mechanical
Housing| Metal Enclosure
Silkscreen Color Dimensions| Black
Transmitter / Receiver: 165mm [W] × 88mm [D] × 18mm [H]
Weight| Transmitter: 170g, Receiver: 165g
Power Supply| Input: AC 100-240V 50/60Hz
Output: DC 24V/1A (Locking connector)
Power Consumption| 13W (Max)
Operation Temperature| 0°C~40°C / 32°F~104°F
Storage Temperature| -20°C~60°C / -4°F~140°F
Relative Humidity| 20%~90% RH (non-condensing)
|
Resolution| Distance
4K2K| 296ft / 90m
1080P| 328ft / 100m
|
Resolution / Cable Length| 4K60 – Feet / Meters| 4K30 – Feet / Meters| 1080P60 – Feet / Meters
HDMI IN / Out| 16ft / 5m| 32ft / 10m| 50ft / 15m
**** The use of “Premium High Speed HDMI” cable is highly recommended.

Operation Controls and Functions

5.1 Transmitter Panel

LED is off when the Transmitter is on standby
ARC LED| Green LED is on when ARC function is turned on
SPDIF LED| Green LED is on when SPDIF OUT port outputs the audio signal returned from SPDIF IN on the Receiver.
USB HOST| Connects to PC for transmitting Receiver’s USB data to Transmitter.
SWITCH| Press the button to switch the output audio signal source for SPDIF OUT and L/R OUT port.
SERVICE PORT| Firmware update port.
DC 24V| DC 24V input for 24V 1A power adapter.
Note that the extender supports PoC function, it means that either transmitter or receiver is connected to 24V/1A power supply, the other doesn’t need power supply.
HDBT OUT| RJ45 connector for connecting the HDBT IN port of Receiver with CAT 5e/6 cable.
Connection Signal Indicator (on the left side of HDBT OUT port)| ▪ Illuminate: Transmitter and Receiver are in good connection status.
▪ Flash: Transmitter and Receiver are in poor connection status.
▪ Dark: Transmitter and Receiver are not connected.
Name| Function Description
---|---
Data Signal Indicator (on the right side of the

HDBT OUT port)

| ▪ Illuminate: HDMI signal with HDCP.
▪ Flash: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI IN| HDMI source input.
IR IN| IR input port for receiving the signal of IR remote.
IR OUT| IR output port for control of source device. This IR output signal is from IR IN port of the Receiver.
L/R OUT| 3.5mm stereo connector for analog audio output.
SPDIF OUT| SPDIF connector for optical audio output.
RS-232| 3-pin Phoenix connector for RS232 command transmission, supporting
RS-232 command pass-through between the Transmitter and Receiver.
LAN| RJ45 connector for connecting Hub or router.

5.2 Receiver Panel

LED is off when the Receiver is on standby
ARC LED| Green LED is on when ARC function is turned on.
SPDIF LED| Green LED is on when SPDIF OUT port outputs the audio signal returned from SPDIF IN on the Receiver.
Two USB 2.0 ports| Connect to USB device.
SWITCH| Press the button to switch the output audio signal source for SPDIF OUT and L/R OUT port.
---|---
SERVICE Port| Firmware update port.
DC 24V| DC 24V input for 24V 1A power adapter.
Note that the extender supports PoC function, it means that either transmitter or receiver is connected to 24V/1A power supply, the other doesn’t need power supply.
HDBT IN| RJ45 connector for connecting the HDBT OUT port of the Transmitter with CAT 5e/6 cable.
Connection Signal Indicator (on the left side of the HDBT OUT port)| ▪ Illuminate: Transmitter and Receiver are in good connection status
▪ Flash: Transmitter and Receiver are in poor connection status.
▪ Dark: Transmitter and Receiver are not connected.
Data Signal Indicator (on

the right side of the HDBT OUT port)

| ▪ Illuminate: HDMI signal with HDCP.
▪ Flash: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI OUT| HDMI output for display.
IR IN| IR input port for receiving the signal of IR remote.
IR OUT| IR output port for control of display device. This IR output signal is from IR IN port of the Transmitter.
SPDIF IN| SPDIF connector for optical audio input.
RS-232| 3-pin Phoenix connector for RS232 command transmission, supporting RS-232 command pass-through between the Transmitter and Receiver.
LAN| Connects to Internet device such as PC or laptop.

5.3 Audio Signal Output Switching
Switch the output audio signal source for SPDIF OUT and L/R OUT port via the “SWITCH” button on the panel (the corresponding LED will illuminate). The states of ARC LED and SPDIF LED indicate the audio output logic, as shown in the table below:

simultaneously output the audio signal returned from HDMI (display device) on Receiver.
off| on| The SPDIF OUT and L/R OUT ports output the audio signal returned from SPDIF IN on Receiver.
off| off| The SPDIF OUT and L/R OUT ports output the audio signal extracted from the Transmitter.

5.4 IR Pin Definition

Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; when the angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters.

Application Example

Maintenance

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzine to clean.

Warranty

If your product does not work properly because of a defect in materials of workmanship, our company (referred to as “the warrantor”) will, for the length of the period indicated as below, “Parts and Labor (1) Year”, which starts with the  date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the  warrantor.
During the “Labor” limited warranty period, there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.

Mail-In Service

When shipping the unit, carefully pack and send it prepaid, adequately insured, and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached.

Limited Warranty Limits and Exclusions

This Limited Warranty ONLY COVERS failures due to defects in material or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in  shipment, or failures which are caused by products not supplied by warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, mis- adjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributed to acts of  God.
There are no express warranties except as listed under “Limited Warranty Coverage”. The warrantor is not liable for incidental or consequential damages resulting from the use of this product or arising out of any breach of this warranty.  (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images, data or other recorded content. The items  listed are not exclusive but are for illustration only). Parts and service, which are not covered by this limited warranty, are your responsibility.

WWW.JTECHDIGITAL.COM
PUBLISHED BY J-TECH DIGITAL INC.
9807 EMILY LANE
STAFFORD, TX 77477
TEL: 1-888-610-2818
E-MAIL: SUPPORT@JTECHDIGITAL.COM J-TECH DIGITAL INC.
9807 EMILY LANE
STAFFORD, TX 77477
TEL: 1-888-610-2818
E-MAIL: SUPPORT@JTECHDIGITAL.COM

References

• J-Tech Digital ® Official Site | Professional AV Solution Provider
• J-Tech Digital 4K 60Hz HDMI KVM Extender 100m w/ ARC, Ethernet, USB 2.0

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>