Blue PURE 211Pius Air Purifier User Manual

Blue PURE 211Pius Air Purifier

Specifications:

• Brand: Blueair
• Product: Air purifier
• Model: Blue PURE 211+1

Product Information

The Blue PURE 211+1 air purifier by Blueair is designed to provide clean and fresh air by removing airborne particles. It comes with a Particle or Particle

• Carbon filter and an optional fabric pre-filter to capture larger particles, extending the main filter’s lifespan.

Usage Instructions

Safety Instructions:
Before using the Pure 211+ air purifier, carefully read and adhere to the safety instructions provided in the user manual to prevent fire, electric shock, or injury. Warranty coverage applies only when the unit is used as instructed.

Placement:
Place the air purifier upright on the floor in a location where it won’t be easily knocked over. Ensure there is ample space around the unit for proper air circulation and avoid placing it near heat sources, wet areas, or soft furnishings.

Set Up:

1. Gently press the buttons on both sides of the unit to remove the top portion.
2. If using the optional fabric pre-filter, attach it by carefully pulling it over the metal frame.
3. Reposition the top of the unit onto the bottom until it clicks into place.
4. Plug in the unit and press the button to turn it on. The indicator light will glow white when operating correctly.

On/Off and Operating Speeds:
The air purifier has three operating speeds: Low, Medium, and High. Press the button once for Low, twice for Medium, and three times for High speed. The unit also features an Autostart function to resume operation at the set speed after power interruptions.

FAQ:

1. Q: How often should I replace the filters?
   A: It is recommended to replace the filters every 6 months for optimal performance. However, actual filter life may vary depending on usage and environmental conditions.

2. Q: Can I use scented oils or air fresheners with the air purifier?
   A: It is not recommended to use scented oils or air fresheners with the air purifier as they can affect the performance of the filters and may void the warranty.

General safety instructions

Remember, the Pure 211+ air purifier unit is an electrical appliance. Please read these safety instructions carefully before use and take the necessary precautions to reduce the risk of fire, electric shock or injury. The Pure 211+ warranty applies only if the unit is used according to these instructions.

WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

General
CAUTIONS:

• Use the grounded power cable provided with your Pure 211+ to plug directly into an appropriate, grounded electrical outlet. (Refer to the rating label on your unit).
• Do not alter the plug in any way.
• Remember to always disconnect the power supply before servicing the unit.
• Do not use the unit if the power cable or plug is damaged or malfunctions in any manner.
• Keep the power cable away from heated surfaces.
• Do not sit on, stand or climb onto the unit or use the  unit either as a table or for storage.
• Do not place any objects on top of the unit, block air outlets or intakes,or allow foreign objects to enter the unit as this may cause an electric shock or damage the unit.

Intended Use
CAUTIONS:

• Supervise children to ensure that they do not play with the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

SYSTEM OVERVIEW

Blueprint

1. Air outlet
2. lon chamber (Air stream optimizer)
3. Inner wall
4. Fan
5. Motor
6. Fan base
7. Protective grill
8. Release button for filter
9. External metal frame (optional fabric pre-filter)
10. Particle filter or Particle + Carbon filter
11. Air inlet 360°

WHAT’S IN THE BOX

Air purifier unit package

• The air purifier unit
• Particle or Particle + Carbon filter
• Optional fabric pre-filter.
  A fabric pre-filter captures larger particles and increases the lifetime of the main filter.

Options

• A Particle filter or Particle + Carbon filter.
• A fabric pre-filter
• Choice of color for the fabric pre-filter.

Placement

Place the unit in an upright position on the floor in your room. Be sure to place the unit where it won’t be knocked over by any person or pet in the household.

Using the unit in your bedroom?:
After 7 seconds the light automatically dims to 10% of the full effect.

Placing the unit:
Place the unit in a location where air can circulate freely in, out and around the unit.
Do not place the unit closer than 10 cm (4”) from another object.
Do not place the unit directly on or against soft furnishings such as bedding or linen.
Do not place the unit near sources of heat, such as radiators, fireplaces or ovens.
Do not place the unit near wet areas, such as bathrooms or laundry rooms where it may come into contact with water.
Do not place the unit outdoors.

Getting started

If the optional pre-filter is used refer to steps 1 to 5. Otherwise refer to steps 5 and 6.

1. Gently press the buttons on both sides of the unit simultaneously.
2. Remove the top portion of the unit.
3. Then attach the fabric pre-filter. To ensure a smooth fit, pull it carefully over the metal frame.
4. Next, reposition the top of the unit onto the bottom and make sure it clicks into place.
5. Plug in the unit.
6. Press the button to turn the unit on. The unit automatically sets itself to the recommended energy-efficient operating speed. When the indicator light glows white your unit is working properly.

On/off and speed control

1. On/Low
   Press once to turn the unit on and set it to the recommended energy-efficient speed.

2. Medium
   Press twice to set to medium speed.

3. High
   Press three times to set to high speed.

4. Off
   Press a fourth time to turn the unit off.

Moreover, the unit has an Autostart feature. This means that the unit will automatically restart at the set speed if a power failure occurs, the unit is unplugged or a power switch timer is used.

Button control functions

1. Change filter indicator When the indicator turns yellow (after 5 months of operation), it’s time to order a new filter.
2. Change filter When the indicator light turns red (after 1 extra month of operation), you should change the main filter.
3. Reset the filter alert Press the button for three seconds to reset the filter alert.

You can change the filter before the indicator light turns red, i.e. when it first turns yellow. In this case, just reset the unit after changing the filter and use for another 6 months. (see “Change the main filter”)

Vacuum or wash the pre-filter

Occasionally vacuum the exterior of the fabric pre-filter to remove dust. Before removing the fabric pre-filter, turn off and unplug the unit.

1. Gently pull and detach the pre-filter from the lower half of the unit.
2. Wash the prefilter on a gentle, low temperature cycle in the washing machine.
3. Before replacing the fabric pre-filter, gently press the release buttons on both sides of the unit until you hear a click.
4. Lift off the top of the unit.
5. Re-fit the fabric pre-filter over the bottom part of the unit.
6. Replace the top of the unit, pressing firmly until you hear a click.
7. Plug in the unit.
8. To restart the unit press the button for three seconds, and then release it.

Change the main filter

When the indicator light turns red, it’s time to change the main filter. Before changing the main filter, turn off and unplug the unit.

1. Gently press the release buttons on both sides of the unit until you hear a click.
2. Lift off the top of the unit.
3. Remove the old main filter from the unit. Unfold the new main filter and insert into the unit.
4. Firmly press the top of the unit down onto the new main filter until you hear a click.
5. Plug in the unit.
6. To restart the unit press the button for three seconds, and then release it.

This lets the unit know that you have changed the main filter. The indicator light flashes 3 times and then changes from red to white.

CARE AND MAINTENANCE

General care
Take good care of your unit to ensure that it delivers optimal performance.

• Vacuum the pre-filter occasionally to remove dust, or wash it on a gentle, low temperature cycle in the washing machine.
• Change the main filter every six months, depending on the operating conditions.
• When the unit is open to change the filter, vacuum any dust that may have accumulated inside the unit.
• Occasionally wipe the top of the unit with a dry dust cloth.

Specifications

Blue is available in different colors for the Pure 211+ air purifier unit. The colored fabric works as a pre-filter.

1. Certified ratings as stated are based on U.S. version models (120VAC, 60Hz) with Blue Particle Filter. Ratings may be affected by use of other Blue filter models.
2. Air changes per hour are calculated on the recommended room size, assuming 8-foot (2.4-m) ceilings.For smaller rooms, the air changes per hour will increase.
3. Depending on air quality in the area of use, the recommended six-month filter lifetime may be longer.
4. The available electrical power voltage and frequency affects the power consumption of the unit. the power consumption might therefore be different from the stated value.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>