TM-USB-MNT-01-02-ASY Tablet Mount Overbed Table

“`html

Product Information

Specifications

• Base Length: 32″ (81.3 cm)

• Table Top Length: 32″ (81.3 cm)*

• Table Top Width: 13.5″ (34.3 cm)*

• Underbed Clearance: 17″ (43.2 cm)*

• Minimum Table Top Height: 2″ (5.1 cm)

• Maximum Table Top Height: 28″ (71.1 cm)

• Weight of Table: 46 lbs (20.9 kg)

• Maximum Weight Capacity: 52 lbs (23.6 kg)

• Vanity Compartment:

  • Vanity Mirror: 9.1 L x 5.6 W (23.1 cm x 14.2
    cm)

  • Storage Basket: 10 L x 6 W x 9 H (25.4 cm x
    15.2 cm x 22.9 cm)

  • Tablet Arm:

  • Main Surface: Max Horizontal Reach: 20.9″ (53
    cm), Vertical Adjustment Range: 11.8″ (30 cm), VESA Pattern:
    75x75mm and 100x100mm

  • Safe Working Load: 25 lbs (11.3 kg)

Product Usage Instructions

1. User Responsibility

WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death or serious
injury.

CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor or moderate
injury.

2. Receiving Inspection

Remove the tablet mount overbed table from the packaging and
inspect it for damage. If there is any sign of damage, DO NOT USE
and contact your provider.

3. Intended Use

Tablet mount overbed tables are intended to be used in
healthcare facilities to provide patients a surface that spans the
bed or seating allowing them to eat, work, and store personal
belongings. The Tablet Arm allows for a tablet to be mounted to the
table for patients to use without occupying table space.
Additionally, the tablet mount overbed table provides a surface for
medical staff to hold supplies while working with a patient.

Frequently Asked Questions (FAQ)

Q: Can the Tablet Mount Overbed Table be easily moved?

A: Yes, the overbed table comes with base casters and locking
casters for easy movement and stability.

“`

User Manual
Tablet Mount Overbed Table
*Amico continues to improve products, thus products may look different than the ones shown in this manual.

Contents
1. User Responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 2. Receiving Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 3. Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 4. Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 5. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 6. Tablet Mount Overbed Table Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 7. Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
7.1 Tablet Arm Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 7.2 USB Bracket and Cord Hook Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
7.2.1 TM-USB-MNT-01/02-ASY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 7.2.2 TM-USB- MNT-03/04-ASY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 7.3 Tablet Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 7.4 Balancing the Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 7.5 Cable Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 7.5.1 TM-USB-MNT-01/02-ASY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7.5.2 TM-USB-MNT-03/04-ASY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 8. Directions for Proper Use of Tablet Mount Overbed Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 8.1 Use of Tablet Arm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 8.2 Use of Cord Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 8.3 Height Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 8.4 Use of Flip Surface (Optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 8.5 Use of Vanity (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 8.6 Use of Locking Casters (Optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 8.7 Attaching Accessories (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 8.7.1 Urinal Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 8.7.2 Storage Basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 9. Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 10. Cleaning Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 11. Preventative Maintenance Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 12. Warranty Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2 Amico Patient Care Corporation

1. User Responsibility
READ ALL INSTRUCTIONS BEFORE USING This manual is intended to instruct a healthcare professional how to operate and care for the tablet mount overbed table as well as to provide important information to allow for proper training of safety to other users of the tablet mount overbed table. Only those properly trained on its use should operate this tablet mount overbed table. Using this tablet mount overbed table for anything outside of its intended use may result in personal injury or damage to the tablet mount overbed table.
SYMBOL DEFINITION WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
2. Receiving Inspection
Remove the tablet mount overbed table from the packaging and inspect it for damage. If there is any sign of damage, DO NOT USE and contact your provider.
3. Intended Use
Tablet mount overbed tables are intended to be used in healthcare facilities to provide patients a surface that spans the bed or seating allowing them to eat, work, and store personal belongings. The Tablet Arm allows for a tablet to be mounted to the table for patients to use without occupying table space. Additionally, the tablet mount overbed table provides a surface for medical staff to hold supplies while working with a patient.
www.amico.com 3

4. Safety Precautions
Carefully read and strictly follow the warnings and cautions listed. WARNINGS: · DO NOT exceed the safe working load of any surfaces or accessories. · DO NOT lean or sit on table, as it may cause table to tip. · DO NOT use as assistive walking device. · DO NOT hang objects from the Tablet Arm or USB Box. · DO NOT move the tablet mount overbed table by pushing or pulling on the Tablet Arm or other accessories. · DO NOT force Tablet Arm past its limits of rotation and vertical height adjustment. · ALWAYS use tablet mount overbed table on flat surfaces. · ALWAYS make sure the flip surface is clear of items prior to lowering. · ALWAYS make sure the power cord is unplugged and properly stored prior to moving the tablet mount overbed table. CAUTIONS: · DO NOT attempt to move tablet mount overbed table when casters are in locked position. · DO NOT use any lubricant as it can damage the tablet mount overbed table. · DO NOT get electrical devices and connections wet. · ALWAYS rinse tablet mount overbed table with a water-dampened cloth to remove any cleaning agent residue, and dry thoroughly. · ALWAYS lower the flip gently to its resting position. · ALWAYS unplug the power cord from main power prior to cleaning.
4 Amico Patient Care Corporation

5. Specifications

Specifications Base Length Table Top Length Table Top Width Underbed Clearance Minimum Table Top Height Maximum Table Top Height Weight of Table Maximum Weight Capacity Vanity Compartment
Vanity Mirror
Storage Basket
Tablet Arm

Main Surface

Flip Surface

32″ (81.3 cm)

32″ (81.3 cm)*

13.5″ (34.3 cm)*

17″ (43.2 cm)*

2″ (5.1 cm)

28″ (71.1 cm)

42″ (106.7 cm)

46 lbs (20.9 kg)

52 lbs (23.6 kg)

100 lbs (45 kg)**

8.75″ L x 5.25″ W x 1.75″ H (22.2 cm x 13.3 cm x 4.4 cm)

9.1″ L x 5.6″ W (23.1 cm x 14.2 cm)

10″ L x 6″ W x 9″ H (25.4 cm x 15.2 cm x 22.9 cm)

Max Horizontal Reach: 20.9″ (53 cm) Vertical Adjustment Range: 11.8″ (30 cm) VESA Pattern: 75x75mm and 100x100mm

• Weights will vary depending on surface and base configuration ** Weight evenly distributed across surface

Component / Accessory Main Surface Flip Surface Storage Basket Urinal Hook Vanity Tablet Arm

Safe Working Load 25 lbs (11.3 kg) 10 lbs (4.5 kg) 10 lbs (4.5 kg) 5 lbs (2.2 kg) 2 lbs (0.9 kg) 3 lbs (1.4 kg)

www.amico.com 5

6. Tablet Mount Overbed Table Components
K I

A

B

L

M

A C
E

NDETAIL A SCALE 1 : 4 DETAIL C SCALE 1 : 2

C J

H G
D F

Item A B
C
D E F G

Description Main Surface Flip Surface Height Adjustment Handle (one on each side) Base Caster Locking Caster Column Assembly

Item H I
J
K L M N

Part Number Integrated Accessory Rail Tablet Arm USB Box and Cord Hook Assembly (different options available) Tablet Case Vanity Storage Basket Urinal Hook

*Optional Accessory/Feature

6 Amico Patient Care Corporation

7. Assembly Instructions
The Tablet Arm, USB Box, and Cord Hook need to be installed onto the overbed table. The following set of instructions should be followed when installing the Tablet Arm, USB Box, and Cord Hook to the overbed table.
7.1 Tablet Arm Installation
TOOLS REQUIRED 3MM ALLEN KEY (PROVIDED)
1. After removing the packaging, rotate the upper arm 180° relative to the lower arm.
www.amico.com 7

7. Assembly Instructions
2. Tighten the upper limiter screw just until the head contacts the arm using the 3mm Allen key. DO NOT OVERTIGHTEN.

3. Lower the arm onto the mounting stud. Ensure the arm is fully seated.

4. Ensuring that the arm is facing towards the table, tighten the lower limiter screw just until the head contacts the arm using the 3mm Allen key. DO NOT OVERTIGHTEN.

8 Amico Patient Care Corporation

7. Assembly Instructions
7.2 USB Bracket and Cord Hook Installation
TOOLS REQUIRED

5/32″ ALLEN KEY (NOT PROVIDED)

TM-USB-MNT-01/02-ASY

TM-USB-MNT-03/04-ASY

www.amico.com 9

7. Assembly Instructions
7.2.1 TM-USB-MNT-01/02-ASY 1. Loosen the thumbscrews on the USB Bracket and the Cord Hook. Ensure the thumbscrews do not
extend past the adapter plate.

Adapter Plate

Adapter Plate

2. Position the USB Bracket at the bottom of the outer column and align the adapter with the outer column rail. It is recommended that the USB Box is placed on the side of the table that faces the patient.

3. Slide the USB Bracket up the column, leaving a gap from the top. Tighten the thumbscrews until hand-tight.

Flip surface is not shown for illustration purpose 10 Amico Patient Care Corporation

Flip surface is not shown for illustration purpose

7. Assembly Instructions
4. Position the Cord Hook at the bottom of the outer column and align the adapter with the outer column rail.

5. Slide the Cord Hook up the column until it is level with the USB Bracket. Tighten the thumbscrew until hand-tight.

Flip surface is not shown for illustration purpose

Flip surface is not shown for illustration purpose

6. Securely tighten the thumbscrews on the Cord Hook and USB Box Bracket using a 5/32″ Allen key.

7. Refer to Section 8.2 for instructions on the use of the Cord Hook.

www.amico.com 11

7. Assembly Instructions
7.2.2 TM-USB-MNT-03/04-ASY 1. Loosen the thumbscrews on the USB Bracket and the Cord Hook. Ensure the thumbscrews do not
extend past the adapter plate.

Adapter Plate

Adapter Plate

2. Position the USB Bracket at the bottom of the outer column and align the adapter with the outer column rail. Ensure the USB Box is facing the rear side of the Overbed Table. It is recommended that the USB Box is placed on the side of the table that faces the patient.

3. Slide the USB Bracket up the column, leaving a gap from the top. Tighten the thumbscrews until hand-tight.

12 Amico Patient Care Corporation

7. Assembly Instructions

4. Position the Cord Hook at the bottom of the outer column on the other side and align the adapter with the outer column rail.

5. Slide the Cord Hook up the column until it contacts the USB Bracket. Tighten the thumbscrew until hand-tight.

6. Securely tighten the thumbscrews on the Cord Hook and the USB Box Bracket using a 5/32″ Allen key.

7. Refer to Section 8.2 for instructions on the use of the Cord Hook.

www.amico.com 13

7. Assembly Instructions
7.3 Tablet Mounting
Tablet mounting procedure will depend on your model of tablet case. The following are general instructions for mounting the tablet cases available through Amico Patient Care.

MOUNTING HARDWARE (INCLUDED)

4X SCREWS 4X ACORN NUTS 4X SPLIT WASHERS TOOLS REQUIRED

4X SCREW COVERS AND PLASTIC WASHERS

3/32″ ALLEN KEY (NOT PROVIDED) 14 Amico Patient Care Corporation

5/16″ WRENCH OR RATCHET (NOT PROVIDED)

75 mm 100 mm

7. Assembly Instructions
1. Identify the VESA pattern that is suitable for the tablet case.
2. Place the screw into the plastic washer. Insert this assembly through the top two holes of the tablet case. From the front side, place the split washer followed by the acorn nut. Partially thread the acorn nut onto the screw.
3. Align the screws to the keyhole slots and slide the case onto the VESA plate.
www.amico.com 15

7. Assembly Instructions
4. Insert the screw and plastic washer assemblies through the bottom holes of the VESA plate and tablet case. From the other side, place the split washers and thread the acorn nuts onto the screws.
5. Holding the acorn nuts stationary with a 5/16″ wrench, use an 3/32″ Allen key to tighten the four screws.
6. Position the screw cap covers over the plastic washers and firmly press until the cap snaps onto the plastic washers.
16 Amico Patient Care Corporation

7. Assembly Instructions
7. Unlock the case by inserting the key and turning it 90 degrees. The lock pin will pop out and the front cover can be removed. Carefully set it aside.
8. Take your tablet and plug in the charging cable. Feed the cable through the hole on the back of the case.
9. With the case angled upwards, place the tablet into the case.
www.amico.com 17

7. Assembly Instructions
10. Assemble the front cover of the case and press the pin to lock the enclosure.
7.4 Balancing the Arm
TOOLS REQUIRED
5MM ALLEN KEY (PROVIDED) 1. With your tablet and case mounted, use the 5mm Allen key to rotate the adjustment screw to
adjust the gas spring tension until the tablet does not raise or lower on its own. a. If the arm raises on its own, turn counter clockwise. b. If the arm lowers on its own, turn clockwise.
18 Amico Patient Care Corporation

7. Assembly Instructions
7.5 Cable Routing
1. The back of the VESA plate is recessed to allow the cable to pass through while a tablet is mounted. The cable clip can be used to hold the cable in place.

2. Route the USB cable through the cable guard on the upper arm.

3. Remove the cable cover from the lower arm by sliding it upwards.

www.amico.com 19

7. Assembly Instructions
4. Route the cable along the lower arm and slide the cover back onto the arm. (The cable should enter should the top hole and exit through the bottom hole of the cover).
5. Route the cable down through the pass-through hole in the Tablet Mount Base.
6. Continue to Section 7.5.1 for TM-USB-MNT-01/02-ASY and Section 7.5.2 for TM-USB-MNT-03/04-ASY.
20 Amico Patient Care Corporation

7. Assembly Instructions
7.5.1 TM-USB-MNT-01/02-ASY 1. Plug the USB connector into a USB charging port.
7.5.2 TM-USB-MNT-03/04-ASY 1. Route the cable into the space between the USB Bracket and the column.
2. From inside the bracket, route the cable through the cutout and plug the USB connector into a USB charging port.
www.amico.com 21

8. Directions for Proper Use of Tablet Mount Overbed Table

8.1 Use of Tablet Arm
WARNINGS
· DO NOT exceed the safe working load of any surfaces or accessories. · DO NOT hang objects from the Tablet Arm. · DO NOT move the tablet mount overbed table by pushing or pulling on the Tablet Arm or other accessories. · DO NOT force Tablet Arm past its limits of rotation and vertical height adjustment. · ALWAYS ensure that parts are securely fastened before using.
1. Adjust the height and position of the arm by raising, lowering, and rotating until the desired viewing position is achieved. The ranges of motion of the arm are shown below.

± 90°

± 90° ± 90°

± 90°

± 90°

LIMITS OF VERTICAL MOVEMENT

LIMITS OF ROTATION

22 Amico Patient Care Corporation

8. Directions for Proper Use of Tablet Mount Overbed Table

8.2 Use of Cord Hook
WARNINGS
· DO NOT hang objects from the USB Box. · ALWAYS make sure the power cord is unplugged and properly stored prior to moving the tablet mount
overbed table. · The Cord Hook should only be used to store the coiled cable. DO NOT hang any other objects that are not
the coiled cord on the Cord Hook.

1. When not in use, the power cord should be stored on the Cord Hook. The cord should be wrapped around the hook with the plug seated into the hook mount.

TM-USB-MNT-01/02-ASY

TM-USB-MNT-03/04-ASY

www.amico.com 23

8. Directions for Proper Use of Tablet Mount Overbed Table
8.3 Height Adjustment
WARNINGS · DO NOT exceed the safe working load of any surfaces or accessories.

1. To lower tablet mount overbed table, pull up on one of the height adjustment handles found on
   either side of the table and press down on the main surface.
   2. To raise the tablet mount overbed table, gently pull up on the table top using both hands.
   24 Amico Patient Care Corporation

8. Directions for Proper Use of Tablet Mount Overbed Table
8.4 Use of Flip Surface (Optional)
WARNINGS · DO NOT exceed the safe working load of any surfaces. · ALWAYS make sure the flip surface is clear of items prior to lowering.
CAUTIONS · ALWAYS lower the flip gently to its resting position.
1. To raise flip surface, swing surface to a horizontal position and the support locks in place. 2. To lower flip surface, slightly lift the surface to release the support lock and then gently lower the
surface to the vertical position.

RAISING FLIP SURFACE

LOWERING FLIP SURFACE

8.5 Use of Vanity (Optional)
1. To access vanity, pull tray towards you, and lift mirror to vertical position.
2. To return vanity, lower mirror to horizontal position and push vanity until it is fully under the main surface.

www.amico.com 25

8. Directions for Proper Use of Tablet Mount Overbed Table
8.6 Use of Locking Casters (Optional)
CAUTIONS · DO NOT attempt to move overbed table when casters are in locked position. 1. To lock caster, press down on the lever with your foot. 2. To unlock caster, lift up on lever with your foot.

LOCKED

UNLOCKED

8.7 Attaching Accessories (Optional)
WARNINGS · DO NOT exceed the safe working load of any surfaces or accessories.
8.7.1 URINAL HOOK 1. Tilt the adapter into the mating groove of the accessory rail of the tablet mount overbed table. 2. Adjust urinal hook to desired position then turn knob clockwise until adapter is secure in place.

26 Amico Patient Care Corporation

8. Directions for Proper Use of Tablet Mount Overbed Table
8.7.2 STORAGE BASKET 3. From the bottom of the accessory rail slide the basket’s rail adapter into the mating groove. 4. Adjust basket to desired position then turn knob clockwise until adapter is secure in place.

9. Accessories

Description
Storage Basket
Urinal Hook
Vanity Drawer and Mirror
Tablet Arm
USB Bracket and Hook Assembly for table with flip surface, 4x USB-A
USB Bracket and Hook Assembly for table with flip surface, 2x USB-A, 1x USB-C
USB Bracket and Hook Assembly for table without flip surface, 2x USB-A, 1x USB-C
USB Bracket and Hook Assembly for table without flip surface, 4x USB-A
Case for Tablet (contact Amico Patient Care for more options)

Part Number OT-BSK-100609-A OT-URINAL-HK-ASY OT-VANITY-ASY TM-GASARM-W-ASY TM- USB-MNT-01-ASY
TM-USB-MNT-02-ASY
TM-USB-MNT-03-ASY
TM-USB-MNT-04-ASY
TM-TAB-CASE-ZZZ

www.amico.com 27

10. Cleaning Instructions
CAUTIONS · ALWAYS rinse tablet mount overbed table with a water-dampened cloth to remove any cleaning agent
residue, and dry thoroughly. Some cleaning agents are corrosive by nature, and if not rinsed their residue can cause permanent damage. · ALWAYS unplug the power cord from main power prior to cleaning. · DO NOT get electrical devices and connections wet. Amico Patient Care recommends using a mild cleaning agent or detergent when cleaning this product. If other hospital-grade cleaning agents are used, follow the instructions provided by the manufacturer. After cleaning rinse surfaces using a water-dampened cloth, and dry thoroughly as some cleaning agents are corrosive by nature, and if not rinsed their residue can cause permanent damage. Consult Amico Patient Care for approved cleaning agents for your tablet mount overbed table.
28 Amico Patient Care Corporation

11. Preventative Maintenance Checklist
CAUTIONS · DO NOT use any lubricant as it can damage the tablet mount overbed table. Periodic inspection of this tablet mount overbed table is recommended. If any damage or defects are present, the tablet mount overbed table should not be used. This includes parts that may have been altered, become contaminated or are worn or missing. If any of the above are noted, immediate repair or replacement is required. If this tablet mount overbed table is subject to improper maintenance, repair, use and/or abuse leading to malfunction of the tablet mount overbed table, replacement is the sole responsibility of the user. Inspect the following items: All fasteners are secured Table surfaces are not damaged Height adjustment handle locks and releases Table moves freely up and down Base is not damaged All casters are secured and swivel freely Optional storage basket is free from damage and secured Optional urinal hook is free from damage and secured Optional vanity operates correctly and is free from damage Any wiring and other electrical components are intact with no signs of damage Tablet arm is free from damage and secured USB Bracket assembly and Cord Hook are free from damage and secured
www.amico.com 29

12. Warranty Policy
Warranty Policy – Patient Care Furniture
Amico Patient Care Corporation will warrant its Patient Care Equipment to be free from defects as stated in the warranty period mentioned below. Within this period, Amico Patient Care Corporation will replace any part which is proven to be defective, at no charge. Shipping and Installation costs after the first twelve (12) months will be borne by the Customer. Amico Patient Care Corporation’s warranties are as follows:
· Height Adjustable Overbed Tables, Bassinets (Jordan & Lily Series), Delivery Carts (Ryan Series), and Carts (Sit-to-Stand Series) – 2 years
· Casegoods, Carts, and Bassinets (Marco, Ava & Connor Series) – 5 years · Seating – Limited Lifetime Warranty Note: Parts not manufactured by Amico are subject to the manufacturer’s warranty. This includes, but is not limited to, all locks and accessories which have been installed on units by Amico. This warranty is valid only when the product has been properly installed according to Amico Patient Care Corporation specifications, used in a normal manner and serviced according to factory recommendations. It does not cover failures due to damage which occurs in shipments or failures which result from accidents, misuse, abuse, neglect, mishandling, alteration, misapplication or damage that may be attributable to acts of God. Amico Patient Care Corporation shall not be liable for incidental or consequential damages resulting from the use of the equipment. All claims for warranty must first be approved by Amico Patient Care Corporation’s Customer Service Department at: apc-csr@amico.com or 905.764.0800. Upon approval, the Customer Service Department will issue a Return Goods Authorization (RGA) number. An RGA must be obtained prior to commencement of any warranty claim.
30 Amico Patient Care Corporation

Notes
www.amico.com 31

www.amico.com
Amico Patient Care Corporation | 122A East Beaver Creek Road, Richmond Hill, ON L4B 1G6, Canada Toll Free Tel: 1.877.462.6426 | Toll Free Fax: 1.866.440.4986 | Tel: 905.764.0800 | Fax: 905.764.0862 Email: apc- csr@amico.com | www.amico.com APC-IFU-TM-01EN 05.17.2024

References

• Amico Group of Companies | Home Page

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>