SubZero SZ-MINIKEY 25-Key Midi Controller User Manual
- June 6, 2024
- SUBZERO
Table of Contents
SUBZERO
MINIKEY 25-KEY
MIDI CONTROLLER
SZ-MINIKEY
USER MANUAL
WARNING!
Do not open the cover. No user-serviceable parts inside. Refer servicing to
qualified service personnel
Do not place the product in a location near a heat source such as a radiator,
or in an area subject to direct sunlight, excessive dust, mechanical vibration
or shock
The product must not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the product No naked flame
sources, such as lighted candles, should be placed on the product
Allow adequate air circulation and avoid obstructing vents (if present) to
prevent internal heat build-up. The ventilation must not be impeded by
covering the appliance with items such as newspapers, tablecloths, curtains,
etc.
INTRODUCTION
Thank you for purchasing the MINI KEY. To get the most out of your product, please read this manual carefully.
CONTENTS
- SubZero MINIKEY 25 Key MIDI Controller
- USB Cable
FEATURES
- 25 touch-sensitive keys.
- PC & Mac compatible.
- Innovative control change mode.
- 6 Assignable transport buttons.
- Lightweight and compact.
OVERVIEW
-
USB CONNECTION
Connect the supplied USB cable here. -
PROGRAM CHANGE DIAL
This dial can be used to change the selected parameter in your DAW. For example, to cycle through menus, or change dial values (such as panning). -
CC MODE BUTTON
This button toggles CC Mode on (lit) or off (unlit). -
MOD
This button toggles MOD mode on (lit) or off (unlit). -
PITCH BEND DOWN
Gradually moves the pitch of the note being played down. -
PITCH BEND UP
Gradually moves the pitch of the note being played up. -
OCTAVE DOWN
Moves the pitch of the keys down by one octave. -
OCTAVE UP
Moves the pitch of the keys up by one octave. -
OCTAVE DISPLAY LEDs
Indicates how many octaves the keys have moved either up or down. -
KEYS
Velocity-sensitive keys.
FUNCTIONS
GLOBAL MIDI
Global MIDI Channel [1-16] This specifies which MIDI channel the MINI KEY will
transmit messages for notes, pitch bend and MIDI messages that are sent to
your MIDI device. This should be set to match the MIDI DAW software
application that you are controlling. These settings for this button can be
changed using the Software Editor.
MOD MODE
These settings for this button can be changed using the Software Editor.
Keyboard
The keyboard transmits note messages and is velocity sensitive. You are able
to specify the transposition and velocity curve using the software editor.
MIDI messages are transmitted on the global
MIDI channel.
Transpose [-12/+12] This is used to transpose the pitch of the keyboard up or
down in semitone steps. The range is -12 to +12.
Velocity Curve
The velocity curve determines how the force with which you play the keys
affects the output of the note. You can choose 3 different curves or a fixed
velocity.
CC MODE
Pressing the CC MODE Button changes the function of the 25 keys to function as
independent buttons to control change messages. You can specify which MIDI
channel the control change messages are transmitted on; whether or not each
key is enabled, the key type, control change number and the on/ off value.
These settings can be changed using the Software Editor.
MIDI Channel [1 to 16/Global MIDI Channel]
This specifies the MIDI channel of the MIDI messages that are transmitted when
you strike the key. If you set this to “Global MIDI Channel,” the messages
will be transmitted on the global MIDI channel.
Assign Type [No Assign/Note/Control Change] This specifies the type of message
that will be assigned to the key. You can disable the pad or assign a note
message, or a control change.
Key Behaviour [Momentary/Toggle]
You can choose one of the following two types of behavior for the key.
Momentary
The note on or off value will be transmitted when you press the key, and the
note on or off value will be transmitted when you release it.
Toggle
The note on or off value will be transmitted alternately with the note on or
off value each time you press the key.
Note Number [C1 to G9/No Assign] This specifies the note number of the note
message that is transmitted.
CC Number [0 to 127/No Assign]
This specifies the control change number of the control change message that is
transmitted. On Value [0 to 127] This specifies the value of the message that
is transmitted when the key turns on. Off Value [0 to 127] This specifies the
value of the message that is transmitted when the key turns off. You can set
this only if the assigned type is set to change.”
SPECIFICATIONS
Connectors ………..USB connector (mini B type)
Power Supply ………USB bus power mode
Current Consumption ..100 mA or less
Dimensions ………..350 x 100 x 32mm
Weight ……………464g
UNITED KINGDOM
STOCKHOLM | SVERIGE
DEUTSCHLAND
If you have any more questions about this product,
please do not hesitate to contact the Gear4music Customer Service
Team on: +44 (0) 330 365 4444
orinfo@gear4music.com