LINDY 38237 8 Port HDMI 18G Splitter User Manual
- June 6, 2024
- LINDY
Table of Contents
8 Port HDMI 18G Splitter
User Manual
No. 38237
lindy.com
© LINDY Group – FOURTH EDITION (January 2021)
Introduction
Thank you for purchasing from the Lindy HDMI 18G Splitter range. This product
has been designed to provide trouble-free, reliable operation. It benefits
from both a LINDY 2 year warranty and free lifetime technical support. To
ensure correct use, please read this manual carefully and retain it for future
reference.
The Lindy HDMI 2.0 18G Splitter range are compact, high-quality solution for
distributing HDMI 2.0 18G signals across multiple displays from one source
device. With support for resolutions up to 4K 60Hz 4:4:4 8bit, this splitter
is great for creating eye-catching digital signage in retail scenarios,
showing high-quality video in different rooms in medical facilities or
ensuring audiences do not miss any of the action in multi-display sports bars.
Package Contents
- HDMI 2.0 18G Splitter
- 12V DC 1A Multi-Country PSU (UK, EU, US & AUS), Barrel Size: 5.5/2.1mm, Screw Type DC Jack
- This Manual
Specification
- Supports resolutions up to 3840×2160@60Hz 4:4:4 8bit
- Supports High-dynamic range
- Metal Housing
- Operating Temperature: -10°C – 50°C (14°F – 122°F)
- Storage Temperature: -20°C – 60°C (-4°F – 140°F)
- Humidity: 20 – 90% RH (Non-condensing)
Installation
Please ensure all devices are switched off before connecting any source
devices or displays. Once all connections are made please switch on the
devices in the following order: Displays, HDMI Splitter, Source Device.
Connect a source device to the Input port of the HDMI splitter, then connect
displays to the HDMI output ports. Once all connections are made please
connect the power supply and power on the splitter.
Operation
Power LED: This LED will illuminate blue when power is supplied to the
splitter.
IN LED: This LED will illuminate blue when a source device is connected to the
splitter
OUT LED: These LEDs will illuminate and indicate which HDMI output is
connected to an active display
EDID COPY: When switched to COPY, the splitter will read and apply the EDID of
the display connected to HDMI Output 1, and send this EDID to all other
outputs. If no display is connected to Output 1, the splitter will take the
next active Output ports EDID
EDID AUTO: When switched to AUTO, the splitter will apply the most suitable
signal for all connected displays.
HDMI IN: Connect a HDMI source device to the HDMI In port of the splitter.
HDMI OUT: Connect each HDMI display to each HDMI Out port of the splitter.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the International Standard IEC 60950-1 or 60065 or 62368-1.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic
Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into
national law in slightly different ways.
Please follow your national law when you want to dispose of any electrical or
electronic products. More details can be obtained from your national WEEE
recycling agency.
No. 38237
4th Edition, January 2021
lindy.com
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk, T: +44 (0)1642 754000
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>