LINDY 38116 4 Port Splitter C6 HDMI Splitter Extender 100m User Manual

: June 6, 2024
: LINDY

Table of Contents

Introduction
Package Contents
Features
Specification
Overview
Troubleshooting
Recycling Information
Documents / Resources

C6 HDMI Splitter Extender,
User Manual

No. 38116 – 4 Port Splitter
No. 38117 – 8 Port Splitter
No. 38118 – 1 Port Receiver
lindy.com

!!! IMPORTANT !!!
Only use a direct Cat.5e/6/7 cable connection between the HDBaseT ports. Do not connect these ports to Network or Ethernet equipment or any active components

Introduction

Thank you for purchasing from the LINDY HDBaseT Splitter Series. This series consists of 4 and 8 port HDBaseT Splitters and an HDBaseT Receiver (all sold separately) providing you with the flexibility to purchase receivers only for the number of displays in use, or to add additional receivers at a later date. This product has been designed to provide trouble-free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual
carefully and retain it for future reference. Supporting the distribution of uncompressed Full HD 1080p HDMI signals with high resolution for computer graphics as well as for fluent video transmission, these products are ideal for all types of AV installation. The HDBaseT Splitters allow you to extend signals up to 100m, to 4 or 8 displays depending on the model purchased, using high-quality Cat.5e/6/7 RJ45 cable. The HDBaseT Splitters, when installed with HDBaseT Receivers, function as an HDMI Splitter, HDMI over Cat.6 extender, Infrared over Cat.6 Extender and feature a 2 Port Ethernet Switch integrated into each Splitter and Receiver unit.

Package Contents

No. 38116 / 38117

4/8 Port HDBaseT Splitter for HDMI
12V DC/4A Power Adapter
IR Emitter Cable 1.4m
This User Manual
No. 38118
HDBaseT Receiver
5V DC/2A Multi-Country Power Adapter
IR Receiver Cable 1.4m
This User Manual

Features

Distributes a single HDMI signal, IR & Ethernet to multiple displays
Extends uncompressed HDMI or DVI-D signals up to 100m via its HDBaseT connection
HDMI Full HD 1080p or DVI-D up to 1920 x 1200 (using an HDMI to DVI adapter or cable)
Support for 3D signals, including 1080p 3D
Supports 10/100 Base-T Ethernet via the HDBaseT connection (2 x Port 10/100 Ethernet)
Suitable for use with 3D/HDTV Home Theater, professional HDTV installations, Computer Systems, Multimedia, and Control Center system installations.

Specification

The HDBaseT connection is a dedicated cable connection, it is not an Ethernet connection!
Maximum cable length for the HDBaseT connection: 100m (approx.)
Compatible with HDMI 1.4 specification
HDTV resolutions: 1080p24/30/50/60, 1080i, 720p, 576p, 480p
PC resolutions: From 640×480 to 1920×1200
Support for 3D Signals, including 1080p 3D
Deep Colour capable: supports 30/36/48 bit colour depth
Audio Formats: LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD
IR Extension cables (included) allow the control of IR (33-50 KHz) equipment
Maximum HDMI Cable length, 5m in/out
Splitters and Receiver each have a 2 port RJ45 switch for 10/100 Ethernet support. The 10/100 switches are also connected via the HDBaseT connection
Dimensions: 38116: 148 x 63 x 24mm (W x D x H), 38117: 276 x 156 x 25mm (W x D x H), 38118: 110 x 75 x 25mm (W x D x H)

Installation
The following steps are for an installation using HDMI equipment, if you are using DVI equipment, please substitute the HDMI cables for DVI to HDMI cables where required.

Connect your HDMI source to the HDBaseT Splitter unit using a HDMI cable (maximum length 5m).
Connect one end of the Cat.5e/6/7 cable (max. length 100m) to the first output port on the HDBaseT Splitter and the other end to the HDBaseT port of the Receiver. Use solid core installation cable of at least Cat.5e UTP.
Use another HDMI cable (maximum length 5m) to connect your HDMI display device to the HDMI output port on the Receiver unit.
Repeat steps 2 and 3 for each output port.
For additional Infrared remote signal functionality, connect the included IR Extension Cables to the Splitter and Receiver units.
At the Splitter side, place the IR Eye in front of the HDMI source device’s IR receiver. At the remote side, place the IR Eye in a location where it may easily receive the signal of your IR remote.
For Ethernet functionality, connect your devices to the 10/100Base-T ports.
Plug the DC power supplies into the Transmitter and Receiver units and switch on.
Power on your HDMI Source and Display to complete the installation.

Overview

Cat. 5e/6/7 Cable (HDBaseT Connection) up to 100m
Cat. 5e/6/7 Cable (10/100 Ethernet Connection) up to 100m
HDMI Cable up to 5m

Troubleshooting

There is no display on the screen.

Check that the Cat.5e/6/7 cable is plugged in correctly and the Link Status LED is lit.
Check that the HDMI source and display are powered on/active and the HDMI LED is Lit.
Power off all the devices, then power on in this order: first, the Splitter and Receiver units, then the display, and finally the source.
For several HDMI devices, it may be helpful to unplug and replug their HDMI connection to re-initiate the HDMI handshake and recognition.
Reduce the length of Cat.5e/6/7 or HDMI cable used, or use a higher quality cable.

CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE requirements. CE Konformitätserklärung
LINDY erklärt, dass dieses Equipment den europäischen CE-Anforderungen entspricht UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.

FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired
operation.
The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the International Standard IEC 60950-1 or 60065 or 62368-1.

Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk, T: +44 (0)1642 754000

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.

Tested to comply with
FCC standards.
For home and office use.
LINDY No 38116-8
4th Edition, January 2021
lindy.com

Documents / Resources

| LINDY 38116 4 Port Splitter C6 HDMI Splitter Extender 100m [pdf] User Manual
C6 HDMI Splitter Extender 100m, C6 HDMI Splitter Extender 100m, 38116, 4 Port Splitter C6 HDMI Splitter Extender 100m, 38117 8 Port Splitter, 38118 1 Port Receiver
---|---