Qoltec 50865 Wired 1D Image CCD Barcode Scanner User Guide

Qoltec 50865 Wired 1D Image CCD Barcode Scanner User Guide

Thanks you for choosing our company’s product. To have a better operating experience, please read this manual carefully.

Reading Angle

1. Maintain a bevel between the scanner and the bar code to make a best reading.
2.  Do not keep the scanner in 90° with the bar code, otherwise the scanner can’t read.
3. The scanner must aim at the bar code and the beam must cover the whole bar code. If not, error may occur.

Packing list:

1Barcode scanner 1Cable (USB) 1*User manual ,•warranty Card 1•stand (optional)

Product Introduction

This barcode scanner has USB/KB/COM interface for user’s choice. With advantages of quick decoding speed and easy operation, it should be a good solution for bar code identification.
Our company reserves all rights of modifying and final explanation for the manual.

Connecting the Scanner USB:

Connect the USB cable to the USB interface in the computer.

Specification

Automatic Function Settings

1.lf it is an automatic barcode scanner, it has already been well set with the auto scanning function. When there’s an object passes the sensitive area (the sensitive area depends on the size of the object, normally is 5-30cm), the scanner will scan automatically. After it reads a bar code successfully, the light will be off and a trigger cycle finished. The scanner will read again when there’s and object passes the sensitive area.

Function Settings

Custom settings

Buzzer t Brz11czek

Serial Mode Parameter Settings (Baud Rate)

Serial Protocol (Protok61 szeregowy)

use Upload (USB przesylanie J

Prefix & Suffix Setting (Ustawienie prefiksu i sufiksu)

Alphabet

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>