GRACO SM15 Qnique21 Wonderfoot Longarm Quilting Machines Instruction Manual
- June 12, 2024
- Graco
Table of Contents
Copyright November 5, 2021
Grace Company
(Reproduction Prohibited)
Version 1.2
Parts & Tools
| Wonderfoot
(ACC-09-15216)
---|---
| LENS A – Stitch In the Ditch
(ACC-05-15206)
• Trace seams and lines
| LENS B – 1/4” Offset (ACC-05-15208)
• Echoing and offset lines
| LENS C – 3/8” Offset
(ACC-05-15207)
• Echoing and offset lines
| LENS D – 1/4” Circle (ACC-05-15211)
• Echo and offset curves
| LENS E – Clear
(ACC-05-15210)
• Clear view of needle area.
| Needle Bar Thumb Screw M3 x 4 mm (HDW-04-15109)
• Replace the current thumb screw on your machine.
| Hopping Foot Height Tool
(SMP-04-12171)
• Set hopping foot height for quality stitching.
Lens Swapping Instructions
Foot Installation Instructions
- Raise the needle.
- While holding the needle in place, remove the needle bar thumb screw.
- Hold the needle in place, and loosely attach the M3 x 4 mm thumb screw that came with the Wonderfoot.
- Use the needle magnet that came with your machine to align the needle, and tighten the thumb screw.
- Remove the standard hopping foot with the 3 mm Allen wrench.
- Loosely install the Wonderfoot
- Slowly lower the needle.
- Slide the height tool under the foot.
- Make sure the height tool is underneath the Wonderfoot wheel.
- Tighten the hopping foot screw with the 3 mm Allen wrench.
- When moving your machine onto the fabric, slide the inside circlet of the hopping foot away from the fabric edge.
- Practice with the provided templates! Templates can also be printed off www.graceframe.com on the Wonderfoot page.
The Grace Company
Phone: 1-800-264-0644
www.graceframe.com
Documents / Resources
|
GRACO SM15 Qnique21 Wonderfoot Longarm Quilting
Machines
[pdf] Instruction Manual
SM15 Qnique21 Wonderfoot Longarm Quilting Machines, SM15, Qnique21 Wonderfoot
Longarm Quilting Machines, Wonderfoot Longarm Quilting Machines, Longarm
Quilting Machines, Quilting Machines, Machines
---|---