OMCAN SE-CN-0095 Automated Sealing Machine Instruction Manual

OMCAN SE-CN-0095 Automated Sealing Machine

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse for damaged products that were shipped collect or third party. Before operating any equipment, always read and familiarize yourself with all operation and safety instructions. Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also, save the original box and packaging for shipping the equipment if servicing or returning of the machine is required.

Safety and Warranty

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non- commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible. Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop-off to either an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the equipment. Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use. Please see https://omcan.com/disclaimer for complete info.

WARNING:
The packaging components (cardboard, polyethylene, and others) are classified as normal solid urban waste and can therefore be disposed of without difficulty. In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms. DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specifications

Installation

Please follow the below procedure:

• Please note the relative positions between the membrane and all the 6 guide pins.
• To make sure the rotation of the membrane is driven by the roller, the slot on the pressing board should hold the screw of the active position ring.
• The machine is to be powered with by 110V AC with a grounded wire. When the power light flashes it means that the machine is powered and in standby mode.
• Press the power button, the power light turns on.
• Press the pause button, all operation is paused and held. To continued the paused operation, press the start button.
• To cancel, press the rolling/cancel button. You can also cancel paused operations.

When the current state is in standby, the waste membrane roller will rotate continuously. Auto button: when the button is held, the machine will switch between auto mode and half auto mode. When the auto light is on, it is in auto mode. When the light is off, it is in half auto mode. If the button is not held down, the machine will be in smart auxiliary function mode. Reset button: press this button and the machine will be in counter hidden mode. Press this button again to go back into counter mode. Hold down this button until you hear a beep, the current counter will be cleared.

SMART AUXILIARY FUNCTIONS

LEAKAGE PREVENTING FUNCTION

In standby mode, press the auto button, the auto single light flashes, that means the machine has entered the smart auxiliary functions. After placing a container that isn’t sealing properly, press the start button. The machine will start leakage preventing operations with the required parameters. Remove the container and the machine will enter the standby state again.

AUTO CUTTER WASHING FUNCTION

In the standby state, install the drain plug into the outlet and use a napkin or other similar materials to seal the outlet tightly. Put some warm water in the sink. Press and hold the pause button until it beeps, the machine will enter auto cutter washing mode. The platform will slide out when the washing is finished. Press the cancel button to return to the standby state.

Operation

CUSTOM PARAMETER SETTING
The sealing time, giving in time and giving out time can be user defined. There is an option for using or not using the electrical eye, which is useful for the polished membrane, aluminum membrane

F (01~20): blank membrane.

Maintenance

The following procedures should be completed every day:

• Make sure the heating disc is clear.

Attention: If you want to clean the disc with a damp cloth, the unit must be disconnected from the power supply and cooled completely.

• Make sure the platform is clear, and ensure the guide rails are well lubricated.
• Make sure the sink is clear.
• Make sure the electrical eye and the micro switch is clear.
• Make sure the membrane cutter is clear by using the auto cutter washing function.

Troubleshooting

the instructions on the machine.
The cup is squashed.| The height of the cup tray is set at the default for 500cc cups.| Adjust the cup height.
The membrane logo is not centered during sealing.| The electrical eye is misaligned.| Adjust the electrical eye.
The positioning ring is misaligned.| Adjust the positioning ring.

ADDITIONAL INCORRECT OPERATIONS

• The spring of the driven stick is not installed correctly or compressed tightly.
• The membrane is not installed in the U-type slot of the electrical eye.
• The tracking symbol (a square box) on the membrane is not on the light path of the electrical eye.
• The membrane is not through the right side of the giving in stick.
• The positioning ring of the left side roller is changed.
• The clamping board slot does not match the screw of the driving stick positioning ring.

Parts Breakdown

Model SE-CN-0095 44644

Model SE-CN-0095 44644

Model SE-CN-0095 44644

Item No.| Description| Position| Item No.| Description| Position| Item No.| Description| Position
---|---|---|---|---|---|---|---|---
AG497| Main PCB (Big PCB) for 44644| 1| AG508| Input and Output Switch for 44644| 12| AG519| Upper Mold for 44644| 23
AG498| PCB Displayer (Panel PCB) for 44644| 2| AG509| Up and Down Switch for 44644| 13| AG520| Lower Mold for 44644| 24
AG499| Control Shell without Main PCB for 44644| 3| AG510| Film Rolling Bucket-Baffle for 44644| 14| AG521| Cable for 44644| 25
AG500| Alloy Cutter for 44644| 4| AG511| Grommet-Ring for 44644| 15| AG522| Power Line for 44644| 26
__

AG501

| Heating Kit (Anti-Stick with Built In Spring Screw Set) for 44644| __

5

| __

AG512

| __

Beam for 44644

| __

16

| __

AG523

| __

Positioning Ring (2pc Set) for 44644

| __

27

AG502| Upper and Lower Motor for 44644| 6| AG513| Cup Holder for 44644| 17| AG524| Heating Rod for 44644| 28
AG503| Output and Input Motor for 44644| 7| AG514| High Foot (4pc Set) for 44644| 18| AG525| Thermocouple for 44644| 29
AG504| Film Rolling Motor for 44644| 8| AG515| Capacitor for 44644| 19| AG526| Hole Punch for 44644| 30
AG505| Electronic Eye Assembly for 44644| 9| AG516| Flange (2pc Set) for 44644| 20| AG527| Start Switch for 44644| 31
AG506| Sensory Switch for 44644| 10| AG517| Layer or Covering for 44644| 21| | |
__

AG507

| Inner and Outer Springs-Screws for 44644| __

11

| __

AG518

| __

Rail Plate (2pc Set) for 44644

| __

22

| | |

Model SE-CN-0095 44644

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting:

https://omcan.com/warranty-registration/ 

For mailing in Canada

• OMCAN
• PRODUCT WARRANTY REGISTRATION
• 3115 Pepper Mill Court,
• Mississauga, Ontario
• Canada, L5L 4X5

For mailing in the US

• OMCAN
• PRODUCT WARRANTY REGISTRATION
• 4450 Witmer Industrial Estates, Unit 4,
• Niagara Falls, New York
• USA, 14305

or email to: service@omcan.com

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthening and developing new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve and grow the company. We strive to offer customers exceptional value through our qualified local sales and service representatives who provide convenient access to over 5,000 globally sourced products.

QR CODE

Documents / Resources

| OMCAN SE-CN-0095 Automated Sealing Machine [pdf] Instruction Manual
SE-CN-0095 Automated Sealing Machine, SE-CN-0095, Automated Sealing Machine, Sealing Machine, Machine
---|---

References

• Omcan
• Disclaimer – Omcan
• Warranty Registration – Omcan

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>