LAMAX NoiseComfort2 ANC Wireless Headphones with Active ANC User Manual

LAMAX NoiseComfort2 ANC Wireless Headphones with Active ANC

BOX CONTENTS

1× LAMAX NoiseComfort2 ANC
1× Travel Case
1× USB-C Cable
1× 3.5 mm Jack Cable (AUX)
1× User Manual
1× Safety Instructions

DESCRIPTION

1. Multifunction button
2. Status LED
3. Volume settings
4. 3.5 mm AUX input
5. USB-C input
6. Microphones
7. ANC/Transparent mode
   

COTROLS

pressing the button twice
To increase the volume| Press the button
To decrease the volume| Press the button
Next track| Hold down the button for 2 seconds
Previous track| Hold down the button for 2 seconds
Answer a call| Press the multifunction button
End call| Press the multifunction button
Reject call| Hold the multifunction button for 2 seconds
To activate the mobile
assistant | Press the multifunction button three times
Game mode| Double press the multifunction button

POWERING ON

To turn on the headphones, hold the multifunction button for 3 seconds. This will be indicated by a sound and a white blinking LED indicator.

POWERING OFF

To turn off the headphones, hold the multi-function button for 3 seconds. This will be indicated by a sound and a red LED indicator.

PAIRING PROCESS

1. Turn on the headphones to automatically enter Bluetooth pairing mode, indicated by a sound and a blinking white-red LED.
2. Enable Bluetooth on your device and select „LAMAX NoiseComfort2 ANC“ from the list of devices. A sound confirms successful pairing.

If pairing fails, delete the headphones from your device‘s paired list.
Then simultaneously hold the and buttons for 10 seconds to reset and re-enter pairing mode. Follow step 2 for pairing.

ACTIVE NOISE CANCELLATION (ANC)

To activate/deactivate ANC mode, press the button .
ANC mode cannot be activated if an audio cable is connected.
ANC mode primarily reduces lower frequencies while minimally affecting human voices and high frequencies.

TRANSPARENT MODE

To activate/deactivate the transparent transmission mode, press the button .
Transparent mode allows ambient sounds using external microphones.

CHARGING

1. To charge the headphones, connect the included cable to the USB-C port and plug the other end of the cable into a USB-A power supply (5V, 2A max).
2. When charging, the LED indicator turns red. When fully charged, the indicator LED will glow white.

SPECIFICATIONS

Printing errors reserved.

Download the latest version of the user manual here: https://lamax- electronics.com/noisecomfort2anc/manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>