Vanco EVWP3000 HDBaseT Extender Set with Wall Plate Transmitter User Guide
- June 1, 2024
- VANCO
Table of Contents
Vanco EVWP3000 HDBaseT Extender Set with Wall Plate Transmitter
Specifications
- Model: EVWP3000
- Type: HDBaseT Extender Set with Wall-Plate Transmitter
- Maximum Extension Distance: 230ft/70m
- Power Supply: DC 24V 1A
- Supported Cable: Cat5e/6
- Supports: Full HD, 3D, and 4K video resolutions
Product Usage Instructions
- Connect a source device (e.g., Blu-Ray player, game console) to the HDMI input on the transmitting unit.
- Connect a display device (e.g., HDTV, HD projector) to the HDMI output on the receiving unit.
- Connect a single Cat5e/6 cable from the HDBaseT OUT connector of the transmitting unit to the HDBaseT INPUT connector of the receiving unit.
- Plug in the transmitting or receiving unit using the included DC 24V 1A power supply.
- Power on both devices in the same sequence – transmitter and receiver will already be powered when either unit is plugged in.
Frequently Asked Questions (FAQ):
What should I do if no signal is displayed on my connected display?
If no signal is being displayed, check the cables and connections between the
source, transmitter, receiver, and display. Ensure all connections are secure
and correct.
EVWP3000 Quick Start Guide
HDBaseT Extender Set with Wall-Plate Transmitter
Connection Diagram
- Connect a source such as a Blu-Ray player, game console, A/V receiver, cable or satellite receiver, etc. to the HDMI input on the transmitting unit.
- Connect a display such as an HDTV or HD projector to the HDMI output on the receiving unit.
- Connect a single Cat5e/6 cable to the “HDBaseT OUT” connector of the transmitting unit, and then to the “HDBaseT INPUT” connector of the receiving unit.
- For power, plug in the transmitting or receiving unit with included DC 24V 1A power supply.
- Power on each device in the same sequence – transmitter and receiver will already be powered when either unit is plugged in.
At this point the display connected should display the source signal connected to the extender set. If no signal is being displayed, check cables and connections.
Technical Support
Please read the product manual prior to calling or installing this unit since
it will familiarize you with the capabilities of this product and its proper
installation.
In case of problems, please contact Vanco Technical Support by dialing
1-800-626-6445. You can also email
technical support issues to
[email protected] When calling, please
have the part number, serial number (affixed to the bottom of the unit), and
invoice available for reference during the call.
All active electronic products are 100% inspected and tested to ensure highest
product quality and trouble-free installation and operation. The testing
process utilizes the types of high-definition sources and displays typically
installed for entertainment and home theater applications.
Vanco Tech Support
- Phone: 1-800-626-6445
- Email: [email protected] Web: www.vanco1.com
- Please have the part number, serial number, and invoice available when requesting support.
Download the Product Manual
For additional support and the product manual, scan the QR code or visit
www.vanco1.com