Qoltec 50868 2D Wireless Laser Barcode Scanner User Manual

2D WIRELESS BARCODE SCANNER
USER MANUAL
Model: 50868

ntec declares this complies with the Directives as listed in this document:
EMC 2014/30/UE, LVD 2014/35/UE
Dispose of according to local regulations.

Thank you for choosing our company’s product. To have a better operating experience, please read this manual carefully.

Specification

417: 6.67mi1
Scanning Speed| 300 scans/second
Print Contrast| 25%
Scanning Angle| Roll 360°, Pitch 65°, Yaw 65°
Size| 1968770mm (LWH)
Weight| 146g±5g (without cable)
Material| ABS+PVC+PC
Power Supply| DC 5V ±5%, 3.7V 2000mAH lithium battery
Power Consumption| 370mW (working), 160mW (standby), 710mW (maximu&i
Processor| 32 bit
Operating Humidity| 20% to 85% (No Condensation)
Operating Temperature| 32 to 1221,
Storage Humidity| 20% to 85% (No Condensation)
Shock Resistance| 1.5m
Interface| USB cable, Wireless 2.4G transmission
System Supported| Windows (XP,7,8,10), Android, Linux, MAC
Language Supported| English, German, French, Spanish, Italian, Japanese
Decoding Capability 1D| Code25-InterleavedU Code39-Regular Code93-Regular EAN /GSUUCC-128Auto
EAN/JAN-13
Code11
Code25-Standard Code39-FullASCH Code93-FuIIASCII Code bar
UPC-A
UPDO
Code25-Matri
Code32
Code128
MSI
JAN-8

The scanner has been set well before delivery, please do not casually scan any barcode on Quick Guide to test. If an abnormal condition occurs after scanning the barcodes on Quick Guide, please scan the following “Initialization Settings” barcode.

Initialization Settings

Pair in the corresponding Mode

Connect the scanner with your PC’s built-in Bluetooth.

1. Double click the Bluetooth icon and then the “Devices and Printers” will show.
2. First scan “Bluetooth HID Mode” then scan the “Match” barcode or press the trigger button for 10 seconds, blue and green indicator light flashes and the Bluetooth scanner enters pairing status.
3. Click “Add a device” and there comes a dialog box that shows “Barcode Scanner HID”.
4. Double click “Barcode Scanner HID”, after a sound of “di”, the Bluetooth connection is done.

|
---|---
Bluetooth HID Mode| Match

Connect the 2.4G dongle with a PC

Plug the 2.4G dongle into the PC USB, (the scanner has paired with the 2.4G dongle well before delivery), and press the button, it can work directly.
Note: if cannot upload data via the 2.4G dongle, please first scan “2.4G Mode” then scan “Match Enforced”. After scanning the following two setting barcodes, green indicator light flashes and in pairing status. When pairing is done, the blue indicator light on always.

|
---|---
2.4G Mode| Match Enforced

How To Use SPP Mode

1. Scan “SPP Mode”.
2. Search “Barcode Scanner SPP” from the device.
3. Double click “Barcode Scanner SPP”, and wait for the driver installation, after a sound of “di”, Bluetooth SPP mode is connected.

SPP Mode

How To Use Virtual COM Mode

1. Plug into a 2.4G dongle
2. Scan “Virtual COM “
3. Install the driver from the supplier(Win10 will install the driver automatically)

Virtual COM

Scan the setting barcode once to open the HID Keyboard (10S), scan a second time to close the HID Keyboard (IOS).

|
---|---
HID Keyboard Display / Hide (10S)| Switch On (Double-click) Display / Hide HID Keyboard (10S)

After scanning the setting barcode, you can press the scanner button 2 times quickly to open HID Keyboard (IOS).

Switch Off (Double-click) Display / Hide HID Keyboard (10S)

After scanning the above the setting barcode, you can press the scanner button 2 times quickly to close HID Keyboard (10S).

Wired and wireless mode switch automatically

1. When the scanner connects to devices (computer, POS machine, etc) by USB cable, it switches into Wired Mode automatically, and into charging status at the same time
2. When the scanner does not connect to devices (computer, POS machine, etc) by USB cable, it switches into Wireless Mode automatically. (Note: If the scanner cannot switch into Wireless Mode automatically, please pair again, refer to “Pair in the corresponding Mode”).

Transmission speed setting

| |
---|---|---
Low Speed| Medium Speed| Hight Speed

Language setting

Due to different output characters in different countries, it will need to configure the keyboard language accordingly. The default is American English.

Buzzer setting

|
---|---
|

Mode setting

|
---|---
| |
---|---|---
Upload inventoried data| Inventoried barcode quantity| Clear inventoried data

Sleep time setting

Suffix setting

Methods to add prefixes and suffixes:

1. Scan “Set to Add Prefix” or “Set to Add Suffix”.
2. Scan the characters you need as prefixes or suffixes (on Characters Table), the maximum number of characters is 32 bytes.

|
---|---
Set to Add Prefix| Set to Add Suffix

Methods to hide prefixes and suffixes :

1. Scan “Set to Hide Prefix” or “Set to Hide Suffix”.
2. Scan the numbers you want to hide, and the maximum number is 4 bytes.

Display basic information

Version Information

Characters Table

| Producer/Producent: NTEC sp. z o.o. ul. Chorzowska 44B, 44-100 Gliwice, Poland| www.b2b.ntec.eu WEEE/BDO: 000137497 Made in China Designed in Europe|
---|---|---|---

More information is available on the website: www.qoltec.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>