OPTICIS BR-400 19 Inch 1RU Power Supply Frame For Optical Modules User Manual
- June 6, 2024
- opticis
Table of Contents
OPTICIS BR-400 19 Inch 1RU Power Supply Frame For Optical Modules User
Manual
Welcome!
Congratulations on your purchase of the 19” 1RU Power Supply Frame for Optical Module, BR400. This manual contains information that will assist you in installing and operating the product.
Product Description
OPTICIS BR-400 , 19” 1RU multi-mounting rack is a modular rack and systematic fiber-optic solution providing flexibility to install Opticis Optical extension modules up to 8 units.
Each power line of mounting unit is connected to the central bus power of +12VDC at 4.2A. BR-400 can be fit with the dual power supplies for load- sharing and redundant backup.
BR-400 adopts two(2) LEDs in the front panel for power supply failure to run the stable system without any disruption or disconnection from the power failure.
* Note: The optical modules are separately sold.
Shipping group
- BR-400: One (1) unit
- Module bracket: Eight (8) units
- Heat Sink: Sixteen (16) units
- Screw: Sixteen (16) units
- Power cable for optical module: Eight (8) units
- User manual: One (1) unit
- Options
- BR-400-IT (BI050S12F02): Power Supply for BR-400 (100-240VAC, 50-60Hz)
- BR-400-MD (BM050S12F02): Medical Certified Power Supply for BR 400 (100- 240VAC, 50-60Hz)
Installation
-
Step 1
Remove the ‘CLASS 1 LASER PRODUCT’ label which covers screw hole in part A and remove the screw, either.
Fig. 1: Remove ‘CLASS 1 LASER PRODUCT’ label and screws -
Step 2
Install optical module on the Module bracket with by provided screws according to Fig.2 for each module.
Fig. 2: Holes on Module bracket for each Opticis optical module -
Step 3
Stick the two(2) Heat sinks on the bottom of Module bracket.
Fig. 3: Two(2) Heat sinks for each Module bracket -
Step 4
Mount the Module bracket on BR-400 and connect Power cable and optical cable to each Opticis optical module.
_
Fig. 4: Mounting the Module bracket on BR-400._ -
Step 5
Connect one(1) or two(2) BR-400-PS (IT) or BR-400-PS (MD) to BR-400.
CUSTOMER SUPPORT
© 2020 Opticis Co., Ltd. All Rights Reserved
Version 1.1, Nov 2020
OPTICIS HQ
Opticis Co., Ltd.
3F, 305, Sanseong-daero, Sujeong-gu
Seongnam-si, Gyeonggi-do, 13354
South Korea
Tel: +82 (31) 719-8033
Fax: +82 (31) 719-8032
www.opticis.com
[email protected]
For order support, please contact your Distributor or Reseller.
For technical support, check with the Opticis website www.opticis.com or contact [email protected]