OPTICIS DPFX-300-TR Detachable Extender User Manual
- June 6, 2024
- opticis
Table of Contents
OPTICIS DPFX-300-TR Detachable Extender
Product Description
DisplayPort 1.2 one(1) fiber optical detachable extender, DPFX-300, extends DisplayPort 1.2 signal up to 200m (656feet) and transmits 4K UHD (4096×2160) at 60Hz over one(1) LC multi-mode fiber. Leading-edge technology of Optics allows long-distance transmission of 4K signal without any video/audio degradation. PDF-300-TR is designed to be compact enough to be fitted into various installation environments. It gives slim, light, easy installation with perfect electrical isolation, b ut without electrical hazards and interference. Between Transmitter (DPFX-300-Tx) and receiver (DPFX-300-Rx), pure fiber connection by a single LC fiber connector gives clean, secure and easy installation. PDF-300- TR can be operated by USB power without an external DC power adapter with plugging micro USB (DPFX-300 module side) – USB (source/display devices side) cable which is supplied in the shipping group.
System Requirements for Setup
Hardware requirements
- You must have a DisplayPort source and display. It should support the maximum graphic resolution feature of displays to be connected.
- No special requirements of memory size, CPU speed and chipsets, if you’ve already properly installed your DisplayPort systems or graphic cards.
- Proper initial trial of the entire platform with its application using a short length copper cable is recommended prior to installation with the optical link.
Software requirements
- No special restrictions, if you’ve already properly installed your DisplayPort systems
Power Technical Advisory
- Enclosed Power Adaptors and USB cables supply power to both Transmitter and Receiver.
Connection Advisory
- It is highly recommended that DisplayPort source is directly connected into DisplayPort display output via DPFX-300-TR without connection to incompatible distributor, switcher and selector.
The Shipping Group of DPFX-300-TR;
- One (1) Transmitter (Tx) and One (1) Receiver (Rx)
- One (1) 0.2m Male to Female DisplayPort copper cable Two (2) Micro USB to USB cables
- Two (2) 5V 1A power adapter
- User Manual
- Default connection is direct connection to both source (Tx side) and display (RX side)
- If direct connection is impracticable, 0.2m DisplayPort copper cable is strongly recommended to use on Tx(Display Source) side only
Warranty Information
(One) Year Warranty
Opticis warrants this optical DP module to be free from defects in workmanship
and materials, under normal use and service, for a period of one (1) year from
the date of purchase from Optics or its authorized resellers. If a product
does not work as warranted during the applicable warranty period, Optics
shall, at its option and expense, repair the defective product or part,
deliver to the customer an equivalent product or part to replace the defective
item, or refund to the customer the purchase price paid for the defective
product. All products that are replaced will become the property of Optics.
Replacement products may be new or reconditioned. Any replaced or repaired
product or part has a ninety (90) day warranty or the remainder of the initial
warranty period, whichever is longer.
Optics shall not be responsible for any software, firmware, information, or
memory data of customer contained in, stored on, or integrated with any
product s returned to Optics for repair under warranty or not.
Warranty Limitation and Exclusion
Optics shall have no further obligation under the foregoing limited warranty
if the product has been damaged due to abuse, misuse, neglect, accident,
unusual physical or electrical stress, unauthorized modifications, tampering,
alterations, or service other than by Opticis or its authorized agents, causes
other than from ordinary use or failure to properly use the product in the
application for which said product is intended.
Dispose of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate
systems) This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. Instead it shall be handed
over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling
of this product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service
or the shop where you purchased the product.
Certifications
CE / FCC, Class 1 Laser Eye Safety
Certification of Eye Safety
This laser product is inside implemented by using 780, 825, 850, 930, 960,
990nm LD Transceivers, manufactured by Opticis Co., Ltd., which are all
certified by CDRH/FDA referred as classified in Laser Class 1 (IEC60825-1).
Caution – Use of controls or adjustments or performances of procedures other than those specified herein may result in hazardous radiation exposure.
Opticis Locations
OPTICIS HQ
Opticis Co., Ltd. 3F, 305, Sanseong-daero Sujeong-gu, Seongnam-si Gyeonggi-do,
13354 South Korea
Tel: +82 (31) 719-8033
Fax: +82 (31) 719-8032 www.opticis.com For
order support, please contact your Distributor or Reseller. For technical
support, check with the Optics website
www.opticis.com or contact
techsupp@opticis.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>