opticis DPOC-14N Stretch DisplayPort DisplayPort 1.4 Active Optical Cable User Manual
- October 30, 2023
- opticis
Table of Contents
opticis DPOC-14N Stretch DisplayPort DisplayPort 1.4 Active Optical Cable
Product Information
DisplayPort1.4 Active Optical Cable
Product Description
The DisplayPort1.4 Active Optical Cable, DPOC-14N is a high-quality cable that allows you to connect your DisplayPort display source to a TV, monitor, or projector. It comes with one unit of cable that can be customized to your desired length. This product is accompanied by a user manual that contains information on how to install and operate the product.
System Requirements for Setup
Hardware Requirements: To use the DisplayPort1.4 Active Optical Cable, you need a DisplayPort display source (Media player, PC or laptop) that supports the maximum graphic resolution feature of Display (TV, Monitor or Projector) to be connected. There are no special requirements for memory size, CPU speed and chipsets if you’ve already properly installed your DisplayPort systems.
Software Requirements: There are no special restrictions if you’ve already properly installed your DisplayPort systems.
AC/DC Power Adapter Technical Advisory: The DPOC-14N is designed to use +3.3V internal power supplied through a DisplayPort pin (#20) on the graphic source port. DisplayPort pin (#20) is powered by TX(source) and RX(display) is not.
Installation
Important: Please follow the installation procedure below to avoid improper or no operation.
- Carefully unpack the contents of the shipping group.
- Directly plug the TX side of DPOC-14N into the DisplayPort receptacle of DisplayPort source (Media player, PC or laptop) without external power.
- Directly plug the RX side of DPOC-14N into the DisplayPort receptacle of a Display.
- If the system does not work properly, go to page 1-4, trouble shooting.
Note: Opticis does NOT recommend customer to use any intermediate cable or adapter with DPOC-14N. It may deteriorate the signal transmission performance. DPOC-14N can utilize the +3.3V power supplied through a DisplayPort pin (#20) from the DisplayPort source.
Troubleshooting, Maintenance, Technical Support
Maintenance: Ensure that the cables and power modules are stored or used in a benign environment free from liquid or dirt contamination. Be cautious of partial bending of boots(neck) when using cables. If the cable is bent too much, the cable will be damaged and not work. There are no user serviceable parts. Refer all service and repair issues to Opticis.
Technical Support and Service: For commercial or general product support, contact your reseller. For technical service, contact Opticis by email techsupp@opticis.com or visit our website at www.opticis.com
Product Specifications
The DPOC-14N, DisplayPort 1.4 Active Optical Cable supports DisplayPort 1.4 Standards and extends up to 8K DSC(7680×4320) at 60Hz. It can transmit DisplayPort data up to 100m (328feet) over hybrid cable.
Welcome!
Congratulations on your purchase of the DisplayPort1.4 Active Optical Cable,
DPOC-14N! This manual contains information that will assist you in installing
and operating the product.
Product Description
Shipping Group
- DPOC-14N, DisplayPort 1.4 Active Optical Cable: One (1) unit, length as you inquire.
- User Manual
System Requirements for Setup
- Hardware requirements
- You may have a DisplayPort display source (Media player, PC or laptop). It should support the maximum graphic resolution feature of Display (TV, Monitor or Projector) to be connected.
- No special requirements for memory size, CPU speed and chipsets, if you’ve already properly installed your DisplayPort systems.
- Software requirements
- No special restrictions, if you’ve already properly installed your DisplayPort systems.
- AC/DC Power Adapter Technical Advisory
The DPOC-14N is designed to use +3.3V internal power supplied through a
DisplayPort pin (#20) on the graphic source port. DisplayPort pin (#20) is
powered by TX(source) and RX(display) is not.
Note that if either of Display source or Display does not support DisplayPort
1.4 standard, DPOC-14N would not transmit DisplayPort 1.4 signal.
Just like copper cable, transmitting information will follow lower resolution
among the two.
(Example: 4K/8K Display source – 2K Display → 2K resolution,2K Display source
– 4K/8K Display → 2K resolution)
Installation
Important: Please use the installation procedure below. Improper or no operation may result if the start-up sequence is not correctly followed.
Step 1
Carefully unpack the contents of the shipping group.
Step 2
Directly plug the TX side of DPOC-14N into the DisplayPort receptacle of
DisplayPort source (Media player, PC or laptop) without external power.
Step 3
Directly plug the RX side of DPOC-14N into the DisplayPort receptacle of a
Display.
Step 4
If the system does not work properly, go to page 1-4, trouble shooting.
Note:
- Opticis does NOT recommend customer to use any intermediate cable or adapter with DPOC-14N. It may deteriorate the signal transmission performance.
- DPOC-14N can utilize the +3.3V power supplied through a DisplayPort pin (#20) from the DisplayPort source.
Troubleshooting
The display shows black screen.
Ensure that the DisplayPort ports are firmly plugged into the DisplayPort
source and display. Ensure that the TX and RX modules are plugged correctly to
the DisplayPort source and display respectively.
Check if the DisplayPort source and display are powered on and properly
booted.
Reset the system by de-plugging and re-plugging the TX DisplayPort port or RX
DisplayPort port.
Re-boot up the system while connecting the optical DisplayPort cable system.
Screen is distorted or displays noises.
Ensure connections of both plugs while disconnecting and reconnecting the
optical DisplayPort cables.
Maintenance
Ensure that the cables and power modules are stored or used in a benign
environment free from liquid or dirt contamination.
Be caution of partial bending of boots(neck) when using cables. If the cable
is bent too much, the cable will be damaged and not work.
There are no user serviceable parts. Refer all service and repair issues to
Opticis.
Technical Support and Service
For commercial or general product support, contact your reseller. For
technical service, contact Opticis by email
techsupp@opticis.com or visit our website at
www.opticis.com
Product Specifications
DPOC-14N, DisplayPort 1.4 Active Optical Cable
-
Support DisplayPort 1.4 Standards
-
Extends up to 8K DSC(7680×4320) at 60Hz
-
Transmits DisplayPort data up to 100m (328feet) over hybrid cable
-
Supports up to 32.4Gbps data rate with 8.1Gbps/lane(HBR3)
-
Offers different jacket type of cables as Plenum or LSZH or TPU
-
Plug and Play
-
Operates without external power
-
Bi-directional hardware handshake with voltage assertion for DPCP, EDID
-
Multi-channel Audio, Dolby true-HD, DTS-HD Master Audio
-
Cable Tensile load: 100N
-
Minimum bending radius:
Plenum/LSZH: 6mm
TPU: 9mm -
Outer diameter of cable
Plenum/LSZH: 3.4mm (±0.2)
TPU: 4.5mm (±0.3)
-
-
Mechanical specifications of TX and RX module parts
- Dimensions: 47.8mm / 20mm / 12.7mm (L/W/H)
-
Environmental Specifications
- Operating temperature: 0°C to 50°C
- Storage temperature: – 30°C to 70°C
- Humidity: 5% to 85%
Warranty Information
1 (One) Year Warranty
Opticis warrants this optical DisplayPort extension cable to be free from
defects in workmanship and materials, under normal use and service, for a
period of one (1) year from the date of purchase from Opticis or its
authorized resellers.
If a product does not work as warranted during the applicable warranty period,
Opticis shall, at its option and expense, repair the defective product or
part, deliver to customer an equivalent product or part to replace the
defective item, or refund to customer the purchase price paid for the
defective product.
All products that are replaced will become the property of Opticis.
Replacement products may be new or reconditioned. Any replaced or repaired
product or part has a ninety (90) days warranty or the reminder of the initial
warranty period, whichever is longer.
Opticis shall not be responsible for any software, firmware, information, or
memory data of customer contained in, stored on, or integrated with any
products returned to Opticis for repair under warranty or not.
Warranty Limitation and Exclusion
Opticis shall have no further obligation under the foregoing limited warranty
if the product has been damaged due to abuse, misuse, neglect, accident,
unusual physical or electrical stress, unauthorized modifications, tampering,
alterations, or service other than by Opticis or its authorized agents, causes
other than from ordinary use or failure to properly use the Product in the
application for which said Product is intended.
Dispose of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate systems) This symbol on the
product or on its packaging indicates that this product shall not be treated
as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
© 2022 Opticis Co., Ltd. All Rights Reserved Version 1.0_September 2022
Opticis Locations
Headquarters
Opticis Co., Ltd.
3F, 305, Sanseong-daero Sujeong-gu, Seongnam-si Gyeonggi-do, 13354 South Korea
Tel: +82 (31) 719-8033 Fax: +82 (31) 719-8032
www.opticis.com
For order support, please contact your Distributor or Reseller.
For technical support, check with the Opticis web site
www.opticis.com or contact
techsupp@opticis.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>