RENWEI KS05 Lavalier Microphone User Manual

RENWEI KS05 Lavalier Microphone

Product Information

Specifications:

• Product Name: KS05 Lavalier Microphone
• FCC Compliance: Part 15 of FCC Rules

Product Usage Instructions

1. Setting Up the Microphone:
   Before use, ensure the microphone is securely connected to the appropriate audio input jack on your device.

2.  Adjusting Microphone Placement:
   Clip the lavalier microphone to your clothing, positioning it close to your mouth for optimal sound quality.

3.  Powering On the Microphone:
   If applicable, turn on any power switches or activate the microphone according to its power source requirements.

4. Testing Sound Quality:
   Record a sample audio clip and adjust microphone settings as needed for clear and crisp sound output.

FAQ (Frequently Asked Questions):

• Q: How do I clean the lavalier microphone?
  A: Use a soft, dry cloth to gently wipe the microphone’s exterior. Avoid using liquids or harsh chemicals.

• Q: Can I use the lavalier microphone with smartphones?
  A: Yes, as long as your smartphone has a compatible audio input jack or adapter for the microphone.

• Q: What should I do if the microphone causes interference?
  A: Check for any nearby electronic devices that may be causing interference and adjust the microphone’s placement accordingly.

KS05 lavalier microphone

product description

1. Charging compartment

2. Battery indicator light : The current battery level will be displayed when the charging case is charging.

3. Microphone indicator light : When charging the microphone, the current power will be displayed on the left/right side (each grid represents 25% of the power)

4. Charging port : Type° C charging input Important note: Please use a 5V1A power adapter to charge the product. Exceeding the rated power may cause malfunctions. (Product does not come with power adapter)

5. Receiver Function Introduction

6. Microphone 1: The indicator light flashes when the receiver is not connected to the microphone, and the indicator light is always on when it is connected

7. Microphone 2: The indicator light flashes when the receiver is not connected to the microphone, and the indicator light is always on when it is connected

8. Mobile phone interface: The receiver is directly plugged into the mobile phone for use

9. Charging interface: Supports charging the mobile phone while using

10. Transmitter (collar microphone) function introduction

Instructions

1. How to connect to a mobile phone to record audio/video
   • Step 1: Long press the transmitter (collar microphone) to turn it on;
   • Step 2: Plug the receiver into the phone to complete the connection;
   • Step 3: Turn on the default noise reduction mode, open the phone camera or shoot APP to record audio and video.
   • (Note: Due to system restrictions, some Android phones do not support external device recording)
2.  How to connect to mobile phone live broadcast
   • Step 1: Press and hold the transmitter (collar microphone) to turn it on;
   • Step 2: Insert the receiver into the mobile phone to complete the connection:
   • Step 3: Switch the transmitter to the required effect, open the live broadcast APP on the mobile phone to carry out live broadcast and sales, etc.

FCC Caution:

This device complies with part 15 of the FOC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. and
2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FOC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. frequency energy and, This equipment generates, uses and can radiate radio is no guarantor that if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna. from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. requirement.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Product parameters

• Directional type: omnidirectional frequency range
• Frequency range: 2.4g
• Frequency range: 20Hz-20KHz
• Signal-to-noise ratio: >75dB
• Battery capacity: 120mAh/3.7V
• Rated input: DC5V=1A
• Standard charging time: about 2 hours
• Working time: about 6 hours

Charging bin parameters

• Charging port: Type-C charging port
• Battery capacity: 600mAh/3.7V
• Rated input: DC5V=1A
• Standard charging time: about 3 hours
• Working time: about 5 hours

Warranty instructions

Warranty scope: non-human damage, the whole machine is guaranteed to be replaced within one month, one-year free warranty, and limited maintenance within three years.

Note : Our company’s products are constantly innovating and are subject to change without prior notice.

Product parameters

1. Please disconnect the charger and turn off the machine before cleaning.
2. Non-professionals should not disassemble the device by themselves to avoid machine failure and loss of warranty right
3. Do not place the device in direct sunlight to avoid premature aging of electronic parts.
4. Avoid using it in dusty or dirty places (dust can easily cause equipment failure)
5. Do not place the device in an overly cold or overheated environment, which will cause the device to not operate normally.
6. It is recommended to set the ambient temperature not to exceed -10°C-40°C°C, and the relative humidity is 10%-95%
7. Do not put any objects into the device to avoid causing mechanical short circuit or circuit damage, and do not pour any liquid on this product.
8. Avoid friction and collision between the machine and hard objects to avoid surface scratches, shedding or other hardware damage.
9. The product must not be exposed to overheating environment such as sunlight, fire or similar.
10. This manual contains important information, please keep it.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>